Samsung AR24KQFNRWKXMG manual Does not work, Electric waves, Room during, Noise is generated, Unit

Problem	Solution
I cannot change the	• When the Auto, Dry, or Fast mode is running or the good'sleep function
	is running in the Cool mode, the air conditioner controls the fan speed
fan speed.
	automatically and you cannot change the fan speed.
	• Replace the batteries in the remote control with new ones.
The remote control	• Make sure that nothing is blocking the remote control sensor.
	• Check whether there are strong lighting apparatus near the air conditioner.
does not work.
	Strong light which comes from fluorescent bulbs or neon signs may interrupt
	the electric waves.
The Timed on/off	• Check whether you pressed the SET button on the remote control after
function does not
	setting the time.
work.
The indicator blinks	• Press the Power button to turn off the air conditioner or disconnect the power
continuously.	plug. If the indicator is still blinking, contact the service centre.
Odours permeate	• Check whether the air conditioner is running in a smoky area. Ventilate the
	room or operate the air conditioner in the Fan mode for 3 to 4 hours. (There
in the room during
	are no components used in the air conditioner that emit a strong odour.)
operation.
	• Check whether the drains are clean. Clean them regularly.
An error is indicated.	• If the indoor unit indicator blinks, contact the nearest service centre. Be sure
	to pass the error code to the service centre.
Noise is generated.	• When refrigerant flow changes, noise may be generated, depending on the
	status of the air conditioner. This is a normal operation.
Smoke is generated	• If may not be a fire but it can be a steam generated from the outdoor heat
from the outdoor
	exchanger while the defrost function is running in the Heat mode in winter.
unit.
Water drops from the	• Condensation may develop when the ambient temperature changes
pipe connections of
	excessively. This is a normal operation.
the outdoor unit.

Cleaning and Maintenance

English 25