Charging, Charger | Samsung VCR8825T3R/XEO, VCR8825T3B/XET instruction

Operating the cleaner

INSTALLING THE ROBOTIC VACUUM CLEANER

CHARGING

When the product is initially purchased, the battery

is fully discharged, and you must charge the robotic	Power Lamp	Charging Lamp
is fully discharged, and you must charge the robotic		Charging Lamp
vacuum cleaner manually.

Turn on the Power Switch at the bottom of the product.

1. After aligning the charge pins of the main unit with		Power	Charging Lamp
1. After aligning the charge pins of the main unit with		Lamp	Charging Lamp
the charge pin of the charger station, press the main		Lamp
the charge pin of the charger station, press the main
unit until you hear a “Recharging power” sound from
the charger.
- The Charging Lamp turns green.
2. Check the charge status of the robotic vacuum
cleaner.
- When charging starts, the battery level indicator and
“ ” will be displayed in sequence in the display panel.
- When charging is complete, the battery level indicator and		Charging	Fully charged
“FULL” will be displayed in the display panel.		Charging	Fully charged
	■ When the battery level display ﬂ ashes	<Charge display>
Flash	■ When the battery level display ﬂ ashes
Flash	while cleaning, the robotic vacuum
	while cleaning, the robotic vacuum
	cleaner stops vacuuming and	complete	charging
	automatically charges itself at the charger.	complete	charging
		Charge	Charging Required

■When the battery level ﬂ ashes and “LO” is displayed while cleaning,

Flash robotic vacuum cleaner cannot be operated by the buttons on the

main unit. In this case, directly carry the robotic vacuum cleaner

to the charger to charge the battery. (This is when the battery is completely discharged.)

● When the product is initially purchased, it will take about 120 minutes to fully charge the battery and will run for about 90 minutes.

NOTE ● When charging the battery while the battery is over-heated, the charging time can increase.

●Measures to take when charging is not smooth.

When the robotic vacuum cleaner cannot be automatically charged, check the following:

-Turn the Power Switch at the bottom of the robotic vacuum cleaner off and on (Reset).

-Re-plug the power of the charger (Reset).

-Check whether there are any foreign substances on the charge connector and wipe the charge connector on the main unit and the charger with a dry cloth.

-Check whether there are objects near the charger that are strong reﬂ ectors.

●When separating the robotic vacuum cleaner from the charger, it will discharge naturally.

-Charge the robotic vacuum cleaner through the charger, if possible. (When leaving your home unattended for a long period of time due to a business trip, travelling etc., turn off the Power Switch of the robotic vacuum cleaner and unplug the power of the charger to store them.)

03 OPERATING THE CLEANER

Operating the cleaner _21

VCR8825T3R/XEO, VCR8825T3B/XET, VCR8825T3W/XAG specifications

The Samsung VCR8825T3 series, comprising the models VCR8825T3W/XAG, VCR8825T3B/XET, and VCR8825T3R/XEO, stands out in the market of home appliances, particularly in the realm of vacuum cleaning solutions. These vacuum cleaners are designed to deliver not just superior cleaning performance, but also user-friendly technology that enhances the overall cleaning experience.

One of the main features of the VCR8825T3 series is their powerful suction capability. Equipped with advanced cyclone technology, these models can easily pick up dirt, dust, and pet hair from various surfaces. The high-efficiency filtration system captures fine particles, ensuring cleaner air is released back into the environment. This feature is particularly appealing for households with allergy sufferers or pets.

Another notable characteristic is the innovative design that prioritizes ease of use. Each model in the series incorporates a lightweight construction, making them maneuverable and easy to carry around the house. The ergonomic handle ensures comfortable operation, reducing strain during cleaning sessions.

The VCR8825T3 series also showcases smart clean technology, enabling users to take advantage of automatic cleaning modes. These modes adapt to different floor types, optimizing suction power for carpeted areas and hard floor surfaces. The added benefit of edge cleaning capabilities allows the vacuum to reach corners and edges, ensuring no dust is left behind.

Additionally, these vacuum cleaners have a large dustbin capacity, which minimizes the frequency of emptying during cleaning. The easy-to-empty design further enhances user convenience, allowing for quick maintenance without mess.

The VCR8825T3 series boasts versatility with various attachments that cater to different cleaning needs. From crevice tools for tight spaces to upholstery brushes, these attachments enhance the functionality of the vacuum, making it suitable for a variety of cleaning tasks throughout the home.

Samsung also places a focus on durability and reliability in the VCR8825T3 series. The robust construction materials ensure long-lasting performance, and the vacuums come with a warranty to provide peace of mind to consumers.

In summary, the Samsung VCR8825T3W/XAG, VCR8825T3B/XET, and VCR8825T3R/XEO models combine high-performance vacuuming capabilities with user-centric features and advanced technologies. From powerful suction to versatile cleaning attachments, these vacuums are designed to meet the diverse needs of modern households, making them an excellent choice for consumers looking for efficiency and convenience in their cleaning routines.

Operating the cleaner

INSTALLING THE ROBOTIC VACUUM CLEANER

CHARGING

1. After aligning the charge pins of the main unit with

the charger.

2. Check the charge status of the robotic vacuum

cleaner.

- When charging starts, the battery level indicator and

while cleaning, the robotic vacuum

cleaner stops vacuuming and

VCR8825T3R/XEO, VCR8825T3B/XET, VCR8825T3W/XAG specifications