Heatiator GB4336 Operating Instructions, A. Before Lighting Appliance, Severe Burns May Result

Page 28

13 Operating Instructions

13 Operating Instructions

A. Before Lighting Appliance

Before lighting this appliance, determine if it has a stand- ing pilot or Intelliﬁ re ignition system by opening the control access panel to view wiring system and gas valve. If this appliance has a red or black ignitor button (See Figure 10.1) this appliance has a standing pilot ignition system. If there is no red or black ignitor button, this appliance has an Intelliﬁ re ignition system.

WARNING

Do NOT use this appliance if any part has been under water. Immediately call a qualiﬁ ed service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

CAUTION

If installing Intelliﬁ re Ignition battery backup:

•Do not install batteries if the backup mode may not be used for extended time.

•Batteries may leak.

•Install batteries only when needed for power outage.

Before operating this appliance, have a qualiﬁed technician:

•Remove all shipping materials from inside and/or underneath the ﬁ rebox.

•Review proper placement of logs, rockwool, lava rock and vermiculite.

•Check the wiring.

•Check the air shutter adjustment.

•Ensure that there are no gas leaks.

•Ensure that the glass doors are in the proper position.

•Ensure that the ﬂ ow of combustion and ventilation air is not obstructed (front grilles and vent caps).

WARNING

Fire Risk

Burn Risk

HOT! DO NOT TOUCH.

SEVERE BURNS MAY RESULT.

CLOTHING IGNITION MAY RESULT

Glass and other surfaces are hot during operation and cool down.

•Keep children away.

•CAREFULLY SUPERVISE children in same room as appliance.

•Alert children and adults to hazards of high temperatures.

•Do NOT operate with protective barriers open or removed.

•Keep clothing, furniture, draperies and other combustibles away.

WARNING

Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to the owner’s information manual provided with this appliance. For assistance or additional information consult a qualiﬁ ed installer, service agency or the gas supplier.

28	Heatilator • GB4336/GB4992 • 4003-085 Rev H • 04/06

Image 28

Contents What to do if you smell gas Models GB4336, GB4336L GB4336I, GB4336ILGB4942, GB4942L GB4942I, GB4942IL B-VentGas ApplianceHomeowner Reference Information Listing Label Information/LocationCongratulations Gas TypeTable of Contents 5 Vent Information and Diagrams8 Installing Vent Pipe 12 Appliance SetupD. High Altitude Installations 1Listing and Code ApprovalsA. Appliance Certiﬁcation C. BTU SpeciﬁcationsA. Design and Installation Considerations 2Getting StartedNegative Pressure B. Negative PressureAsphyxiation Risk D. Inspect the Appliance and Components C. Tools and Supplies NeededAny such action may cause a ﬁre hazard A. Select Appliance Location 3Framing and ClearancesFire Risk B. Construct the Appliance Chase Fire RiskC. Clearances Fire Risk Odor RiskD. Mantel Projections Top of Appliance Drywall A 48 in 1219 mm B maxMantel Leg or Perpendicular Wall A1 in. 25mm min to perpendicular wallA. Vent Termination Minimum Clearances 4Termination LocationsFire Risk Explosion Risk 5Vent Information and Diagrams A. Vent GuidelinesB. Vent System Conﬁguration Fire Risk Asphyxiation RiskVent supports Fire Risk Explosion Risk6Vent Clearances and Framing A. Pipe Clearances to CombustiblesB. Wall Penetration Framing C. Vertical Penetration FramingA. Installing Outside Air Kit Damper Assembly Appliance PreparationRisk of Smoke Spillage Fire Risk Asphyxiation RiskB. Gas and Electrical Connections C. Securing and Leveling ApplianceNailing Tabs both sides8Installing Vent Pipe B. Attach Vent to Firebox AssemblyA. Assemble Vent Sections C. Securing Vent Sections9Gas Information A. Fuel ConversionC. Gas Connection B. Gas PressureD. High Altitude Installations Fire Risk Explosion RiskGas build-upduring line purge may ignite Fire Risk Explosion Risk Asphyxiation RiskA. Recommendation for Wire B. Connecting to the ApplianceC. Intelliﬁre Ignition System Wiring 10 Electrical InformationOptional Accessories Requirements D. Standing Pilot Ignition System WiringOptional Junction Box Wiring E. Junction Box Installation 11 Finishing A. Mantel ProjectionsB. Facing Material Fire Risk12 Appliance Setup B. Clean the ApplianceC. Accessories D.Install the RefractoryF. Log Removal/Replacement I. Air Shutter Setting G. Glass DoorsH. Hood Fire Risk Combustion Fumes Risk13 Operating Instructions A. Before Lighting ApplianceFire Risk Burn Risk HOT! DO NOT TOUCH SEVERE BURNS MAY RESULTC. High Limit Safety Switch B. Check Appliance DraftNote to Qualiﬁed Service Technician WithoutD. Lighting the Appliance WARNING RISK OF FIREFOR YOUR SAFETY READ BEFORE LIGHTING LIGHTING INSTRUCTIONSFOR YOUR SAFETY READ BEFORE LIGHTING NATURAL GASLIGHTING INSTRUCTIONS TO TURN OFF GAS TO APPLIANCEF. Frequently Asked Questions E. After the Appliance is LitInitial Break-inProcedure Issue14 Troubleshooting A. Standing Pilot Ignition SystemSymptom Possible CausesSymptom Possible CausesCorrective Actions Frequent pilot outageB. Intelliﬁre Ignition System SymptomPossible Causes Corrective ActionsSymptom Possible CausesCorrective Actions Pilot sparks, but pilot will15 Maintaining and Servicing the Appliance CleanWhen cleaning glass door Risk of injury or property damageMaintenance and Service Tasks Maintenance TasksInspect one is not presentA. Appliance Dimension Diagram 16 Reference MaterialsFigure 16.1 Appliance Dimensions ModelService Parts B. Service Parts ListGB4336 SERIES Exploded Parts DiagramService Parts GB4336 SERIESDescription of Part GB4336Standing Pilot Valve Assembly Intermittent Pilot Valve AssemblyService Parts Service Parts ListService Parts GB4336 SERIESDescription of Part GB4336GB4942 SERIES Service PartsExploded Parts Diagram Beginning Manufacturing Date 1/19/04Service Parts GB4942 SERIES# Description of Part GB4942Service Parts Standing Pilot Valve AssemblyIntermittent Pilot Valve Assembly Service Parts ListService Parts GB4942 SERIES# Description of Part GB4942C. Optional Components ID4 Insulated Ductin. 102 mm UD4 Uninsulated Duct 4 in. 102 mm 42 in 1067 mmThis page intentionally left blank This page intentionally left blank D. Limited Lifetime Warranty Gas Appliance Fireplace Limited Lifetime WarrantyLimited Lifetime Warranty 1 Year Limited WarrantyE. Contact Information Hearth & Home Technologies Inc1915 W. Saunders Street Mt. Pleasant, Iowa DO NOT DISCARD THIS MANUAL