| R | Castile Pellet Stove | |
|
|
|
|
|
|
|
|
| 1 Listing and Code Approvals |
|
|
|
|
|
|
A. Appliance Certification
Model: | Castile Pellet Stove |
Laboratory: | OMNI Test Laboratories, Inc. |
Report No. | |
Type: | Solid Fuel Room Heater/Pellet Type |
Standard: | ASTM E1509 and |
| Room Heater Pellet Fuel Burning |
| type and (UM) |
| Approved. |
State Listing: | State of Colorado |
B. Mobile Home Approved
This appliance is approved for mobile home installations when not installed in a sleeping room and when an outside combustion air inlet is provided. The structural integrity of the mobile home floor, ceiling, and walls must be maintained. The appliance must be properly grounded to the frame of the mobile home and use only listed pellet vent Class “L” or “PL” connector pipe. A
C. Glass Specifications
This appliance is equipped with 5mm ceramic glass. Replace glass only with 5mm ceramic glass. Please contact your dealer for replacement glass.
NOTE: This installation must conform with local codes. In the absence of local codes you must comply with the
ASTM E1509, (UM)
E. BTU & Efficiency Specifications
Particulate Emis- | .7 grams/hr | |
sions Rating: | ||
| ||
*BTU Output: | 8,000 - 30,000 / hr | |
Heating Capacity: | up to 1,500 sq. ft. | |
Hopper Capacity: | 40 lbs | |
Fuel: | Wood Pellets or Shelled Corn | |
Shipping Weight: | 258 lbs |
*BTU output will vary, depending on the brand of fuel you use in your stove. Consult your
NOTE: Hearth & Home Technologies, manufacturer of this appliance, reserves the right to alter its products, their specifications and/or price without notice.
D. Electrical Rating
115 VAC, 60 Hz, Start 4.1 Amps, Run 1.1 Amps
Page 4 | October 11, 2005 |