R
2100 Millennium Wood Stove (ACC)
C.Blower (Optional)
1.Remove the 3 bolts
2.Align holes in mounting flange of blower with bolt holes in appliance. Blower should be positioned at bottom of rear outer skin as shown in Figure 13.1.
3.
4.Place the bracket containing the snap disc and magnet under the bottom left rear corner as shown in Figure 13.1.
See page 25 for detailed operating instructions for the blower and snap disc.
CAUTION
Shock Risk.
•Do NOT remove grounding prong from plug.
•Plug directly into properly grounded 3 prong receptacle.
•Route cord away from appliance.
•Do NOT route cord under or in front of appliance.
Secure blower with 3 bolts
Snap Disc Bracket with Magnet
Secure wires with wire tie
| MANUAL: |
MANUAL | Snap Disc |
|
FAN
AUTO
| AUTO: Fan will turn ON/OFF |
LOW | Automatically by the Snap Disc |
HIGH OFF
Controls the Fan Speed
Figure 13.1
13-15/16 in. (355mm)
Figure 13.2 - Blower Housing Dimensions
May 5, 2011 | Page 13 |