Vermont Casting 1945 Fireplace and Mantel Trim Shields, Fireplace and Mantel Trim Clearances

Page 12

Defiant Woodburning Stove

Fireplace and Mantel Trim Shields

A fireplace installation requires special clearance between the side of the stove and the right and left walls, between the side of the stove and the decorative side trim on the fireplace face, and between the top of the stove and the mantel.

Noncombustible shields installed 1” (25 mm) away from the combustible surface on noncombustible spacers, called ventilated shields, may be used to reduce clearances.

To protect a mantel from the heat of a stove in a fireplace installation, use a custom-made ventilated mantel shield that is at least 48” (1220 mm) long, centered over the stove. (Fig. 14) Ventilated shields for side trim must extend the full length of the trim.

1" (25mm)

 

1/4" (6mm)

ST501

Fig. 14 A custom-formed mantel shield.

An unprotected mantel (“A”, Fig. 15) cannot be more than 9” (230 mm) deep and must have a minimum clearance of 39” (991 mm), measured from the stove’s top plate. With a ventilated shield, this clearance may be reduced safely to 23” (584 mm).

Unprotected top trim (B) protruding 9” (230 mm) or less from the face of the fireplace must be a minimum of 39” (991 mm) from the stove’s top surface. With a ventilated trim shield, this clearance may be reduced safely to 23” (584 mm).

Unprotected side trim (C) that protrudes 2” (51 mm) or less from the face of a fireplace must have a minimum clearance of 14” (356 mm), measured from the stove’s top side edge. With a ventilated trim shield, the clearance may be reduced safely to 6” (152 mm). If the trim extends more than 2” (51 mm), it is subject to the requirements for wall clearance.

The charts and sample installations that follow list all the clearances required for the various installation configurations of the Defiant.

 

A

B

 

C

 

 

C

 

 

 

ST253b

Fireplace and Mantel Trim Clearances

 

Unprotected

Protected

A. Mantel

39” (991 mm)

23” (584 mm)

B. Top Trim

39” (991 mm)

23” (584 mm)

C. Side Trim

14” (356 mm)

6” (152 mm)

Fig. 15 Maintain clearances to combustible components of the mantelpiece.

12

30001693

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Defiant Welcome Save These Instructions for Future ReferenceTable of Contents Installation AccessoriesStory of the Defiant Specifications Defiant, ModelInstallation Outside AirChimney Height What Kind of Chimney to Use Masonry ChimneysPrefabricated Chimneys Chimney SizeChimney Connector Guidelines Single-wall Chimney ConnectorsSecuring the Single-wall Connector to a Masonry Chimney Freestanding InstallationsFireplace Installations Above the FireplaceThrough the Fireplace Wall Pass-ThroughsFloor Protection for Fireplace Installation Floor ProtectionKeep the Stove a Safe Distance from Sur Rounding Materials Safe Ways to Reduce ClearancesWall Shields Fireplace and Mantel Trim Shields Fireplace and Mantel Trim ClearancesDefiant Clearance Chart Stove Clearance Unprotected Surfaces Protected SurfacesDefiant Clearance Diagrams Unprotected Surfaces Protected SurfacesStove Heat Shields Distance from the Center of the Flue Collar to the Wall Defiant With Rear Heat Shield onlyAssembly Set Up Your StoveInstall Stove Legs Install the Optional Bottom Heat ShieldOperation Defiant ControlsSingle Air Control Regulates Heat Output and Burn Time Damper Directs Air Flow Within the StoveTwo Ways to Add Fuel Infra-Red Reflective Glass Panels For Clear Fire Viewing Andirons Help Protect the GlassBurn Only High-Quality Wood Surface Thermometer is a Valuable Guide to OperationUse the Air Control Settings that Work Best for You Defiant Control SettingsHigh-Efficiency Wood Burning With Catalytic Combustion Conditioning Your Stove Starting and Maintaining a Wood FireRefuel While the Embers Are Still Hot Add larger pieces of wood as the fire begins to burnAsh Disposal Draft Management Steel ChimneyIndoor/Outdoor Location Flue SizingDraft Testing Single VentingCreosote FuelNegative Pressure ConclusionMaintenance How to Adjust the Door Latches Adjust the Damper as NeededCheck the Operation Primary Air Shutter Tighten the Damper Handle as NeededInspection and Cleaning When to Suspect a Combustor ProblemRemoving and Cleaning the Combustor Catalytic ElementRemove the bricks and the brick retainer Replace the Stove Gaskets as Needed 30001693Annual Maintenance Adjust the Door Latch If NecessaryChimney System Permanent Defiant GasketsAppendix Catalytic Combustor Appendix Chimney and Fireplace Hazards For a fireplaceDefiant Woodburning Stove Defiant Woodburning Stove Model Shell Enamel Parts Defiant Color Warranty CFM Corporation

1945 specifications

Vermont Casting, founded in 1975, quickly established itself as a leader in the cast iron stove industry. However, the reference to 1945 in relation to Vermont Casting might allude to the beginnings of the American hearth industry post-World War II. In this pivotal period, the demand for home heating solutions soared, setting the stage for innovations in wood and gas stoves that would shape future designs.

Vermont Casting made a name for itself through a commitment to craftsmanship and durability. The company utilized high-quality cast iron, renowned for its excellent heat retention and even heating properties. This robust material allowed stoves to radiate warmth long after the fire had extinguished, making them an efficient choice for home heating.

One of the standout features of Vermont Casting stoves is their unique design which blends functionality with aesthetic appeal. The company offered both traditional and contemporary styles, appealing to a wide range of consumer tastes. With elaborate decorative patterns and a classic look, Vermont Casting stoves became a centerpiece in many homes, adding warmth not just through heat but also through design.

In terms of technology, Vermont Casting pioneered advancements in combustion efficiency. Their stoves often feature secondary combustion systems that ensure the complete burning of wood, which helps reduce smoke emissions and maximizes heat output. This not only complies with stringent environmental regulations but also makes their products eco-friendly.

Another notable characteristic of Vermont Casting stoves is their versatility. The company produces a range of models that cater to different fuels, including wood, gas, and pellets. This flexibility allows homeowners to choose the best heating solution for their specific needs and preferences.

Vermont Casting also places a strong emphasis on user comfort and ease of use. Many models come equipped with features like airwash systems for cleaner glass, lever handles for easy door operation, and ash pans for convenient cleanup. These thoughtful details enhance the overall user experience, making heating homes more efficient and enjoyable.

As the company has continued to innovate, it has remained committed to sustainability, focusing on creating products that are not only effective but also environmentally responsible. Vermont Casting's dedication to quality, technology, and design has cemented its status as a trusted name in the hearth industry, making it a preferred choice for consumers looking for both performance and style in their heating solutions.
Top Page Image Contents