Vermont Casting 1945 installation instructions Operation, Defiant Controls

Page 18

Defiant Woodburning Stove

Install the Optional Ash Door Heat Shield

1.Remove the two Phillips pan head screws from the ash door.

2.Insert the screws through the ash door heat shield (from the painted side), place the 5/16” spacers over the screws, and carefully thread them back into the original holes. (Fig. 24) The curved lip should be upward, under the ashlip of the stove.

3.Tighten securely.

Spacers

ST538

Fig. 24 Install the ashdoor heat shield.

Adjust the Leg Levellers

Lift the stove slightly so there is no weight on the leg while making the adjustment.

Reverse the Flue Collar (If Necessary)

Reverse the flue collar by removing the two screws that attach it to the back of the stove. Be sure the gasket around the flue collar opening is in position when you screw the collar back onto the stove.

Attach the Damper Handle

Use the 1/4” -20 x 3” screw to attach the damper handle to the damper stub on the left side.

Attach the Primary Air Thermostat Handle

The primary air thermostat handle is the smaller of the two black handles. Secure the handle to the stub on the right side of the stove with an 8-32 x 2” slot head machine screw. (Fig. 25)

Assemble the Removable Insert Handle

The ceramic removable insert handle opens and closes the front doors. Remove after each use, and store it in the handle holder behind the right front leg. Assemble the handle by passing the 3³⁄₈" screw through the ceramic shaft and into the bright metal nub. (Fig. 26) Tighten carefully until snug.

ST539

Fig. 25 Attach the thermostat handle.

ST540

Fig. 26 Assemble the front door handle.

Operation

The Defiant Controls

Two controls regulate the performance of the Defiant: a primary air control supplies oxygen for the fire, and a damper directs air flow within the stove to activate and deactivate the catalytic combustor. (Fig. 27)

Symbols cast into the stove are reminders of the cor- rect directions for using the controls. ‘Left’ and ‘right’ in these directions mean as you face the stove.

Damper Griddle Handle

Door Handle

Handle

 

Air

Control

Lever

Andiron

Door Handle Holder (Behind Leg)

Ash Door Handle

ST541

Fig. 27 The Defiant’s controls are conveniently located and easy to operate.

18

30001693

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Defiant Welcome Save These Instructions for Future ReferenceTable of Contents Installation AccessoriesStory of the Defiant Specifications Defiant, ModelInstallation Outside AirChimney Height Prefabricated Chimneys What Kind of Chimney to UseMasonry Chimneys Chimney SizeSecuring the Single-wall Connector to a Masonry Chimney Chimney Connector GuidelinesSingle-wall Chimney Connectors Freestanding InstallationsFireplace Installations Above the FireplaceThrough the Fireplace Wall Pass-ThroughsFloor Protection for Fireplace Installation Floor ProtectionKeep the Stove a Safe Distance from Sur Rounding Materials Safe Ways to Reduce ClearancesWall Shields Fireplace and Mantel Trim Shields Fireplace and Mantel Trim ClearancesDefiant Clearance Chart Stove Clearance Unprotected Surfaces Protected SurfacesDefiant Clearance Diagrams Unprotected Surfaces Protected SurfacesStove Heat Shields Distance from the Center of the Flue Collar to the Wall Defiant With Rear Heat Shield onlyInstall Stove Legs AssemblySet Up Your Stove Install the Optional Bottom Heat ShieldOperation Defiant ControlsSingle Air Control Regulates Heat Output and Burn Time Damper Directs Air Flow Within the StoveTwo Ways to Add Fuel Burn Only High-Quality Wood Infra-Red Reflective Glass Panels For Clear Fire ViewingAndirons Help Protect the Glass Surface Thermometer is a Valuable Guide to OperationUse the Air Control Settings that Work Best for You Defiant Control SettingsHigh-Efficiency Wood Burning With Catalytic Combustion Conditioning Your Stove Starting and Maintaining a Wood FireRefuel While the Embers Are Still Hot Add larger pieces of wood as the fire begins to burnAsh Disposal Indoor/Outdoor Location Draft ManagementSteel Chimney Flue SizingCreosote Draft TestingSingle Venting FuelNegative Pressure ConclusionMaintenance Check the Operation Primary Air Shutter How to Adjust the Door LatchesAdjust the Damper as Needed Tighten the Damper Handle as NeededRemoving and Cleaning the Combustor Inspection and CleaningWhen to Suspect a Combustor Problem Catalytic ElementRemove the bricks and the brick retainer Replace the Stove Gaskets as Needed 30001693Chimney System Annual MaintenanceAdjust the Door Latch If Necessary Permanent Defiant GasketsAppendix Catalytic Combustor Appendix Chimney and Fireplace Hazards For a fireplaceDefiant Woodburning Stove Defiant Woodburning Stove Model Shell Enamel Parts Defiant Color Warranty CFM Corporation

1945 specifications

Vermont Casting, founded in 1975, quickly established itself as a leader in the cast iron stove industry. However, the reference to 1945 in relation to Vermont Casting might allude to the beginnings of the American hearth industry post-World War II. In this pivotal period, the demand for home heating solutions soared, setting the stage for innovations in wood and gas stoves that would shape future designs.

Vermont Casting made a name for itself through a commitment to craftsmanship and durability. The company utilized high-quality cast iron, renowned for its excellent heat retention and even heating properties. This robust material allowed stoves to radiate warmth long after the fire had extinguished, making them an efficient choice for home heating.

One of the standout features of Vermont Casting stoves is their unique design which blends functionality with aesthetic appeal. The company offered both traditional and contemporary styles, appealing to a wide range of consumer tastes. With elaborate decorative patterns and a classic look, Vermont Casting stoves became a centerpiece in many homes, adding warmth not just through heat but also through design.

In terms of technology, Vermont Casting pioneered advancements in combustion efficiency. Their stoves often feature secondary combustion systems that ensure the complete burning of wood, which helps reduce smoke emissions and maximizes heat output. This not only complies with stringent environmental regulations but also makes their products eco-friendly.

Another notable characteristic of Vermont Casting stoves is their versatility. The company produces a range of models that cater to different fuels, including wood, gas, and pellets. This flexibility allows homeowners to choose the best heating solution for their specific needs and preferences.

Vermont Casting also places a strong emphasis on user comfort and ease of use. Many models come equipped with features like airwash systems for cleaner glass, lever handles for easy door operation, and ash pans for convenient cleanup. These thoughtful details enhance the overall user experience, making heating homes more efficient and enjoyable.

As the company has continued to innovate, it has remained committed to sustainability, focusing on creating products that are not only effective but also environmentally responsible. Vermont Casting's dedication to quality, technology, and design has cemented its status as a trusted name in the hearth industry, making it a preferred choice for consumers looking for both performance and style in their heating solutions.
Top Page Image Contents