Vermont Casting 1945 Assembly, Set Up Your Stove, Install Stove Legs, Storing the Handle

Page 17

Defiant Woodburning Stove

Assembly

Set Up Your Stove

Cast iron stoves are heavy, and it will take two to four people to move your Defiant into position.

Wipe the protective coating of oil from the griddle with a clean dry rag or a paper towel.

Install the handle on the griddle. Slip the bolt through a washer, a nylon bushing, then through the handle and the other bushing, then through the steel spacer and into the griddle tab. (Fig. 20) Tighten securely.

 

Spacer

Bushings

Knob

 

 

Washer

 

Bolt

ST536

Fig. 20 Attach the griddle handle.

Install Stove Legs

Remove and discard the four large slot-head screws from the stove bottom. Install the stove legs (Fig. 21) using the hex head bolts from the parts bag. Use 3/8” washers with all four legs; the door handle holder installs on the right front leg. Position the holder so the hole to accept the handle hub faces out from the right side of the stove. Tighten the bolts firmly.

CAUTION: Overtightening can strip tapped threads.

Leg Bolt and Washer

Leg Leveller

ST466a

 

Fig. 21 Attach the stove legs with leg levellers.

Storing the Handle

Use the removable handle to open or close the doors. After using it, remove the handle so it will not get hot. Store the handle in the handle holder installed behind the right front leg. (Fig. 22)

Bottom Heat Shield

Door Handle Holder

Leg Bolt and Washer

ST564

Fig. 22 Handle holder and heat shield positions.

Install the Optional Bottom Heat Shield

NOTE: The Bottom Heat Shield is required in most installations. Refer to Floor Protection, Page 10, for further details.

1.Remove the four 10-24 x 1/2” hex head bolts from the corners of the ash drop on the stove bottom.

2.Screw the four 1¹⁄₄" spacers into the holes from which you removed the bolts, finger-tight.

3.Align the bottom heat shield against the spacers with the stepped side toward the rear of the stove.

4.Secure the shield with the four hex head bolts removed from the stove bottom previously. Tighten securely. (Fig. 23)

Spacers

ST537

Fig. 23 Attach the optional bottom heat shield.

30001693

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Defiant Save These Instructions for Future Reference WelcomeStory of the Defiant Table of ContentsInstallation Accessories Defiant, Model SpecificationsChimney Height InstallationOutside Air Masonry Chimneys What Kind of Chimney to UsePrefabricated Chimneys Chimney SizeSingle-wall Chimney Connectors Chimney Connector GuidelinesSecuring the Single-wall Connector to a Masonry Chimney Freestanding InstallationsAbove the Fireplace Fireplace InstallationsWall Pass-Throughs Through the FireplaceFloor Protection Floor Protection for Fireplace InstallationWall Shields Keep the Stove a Safe Distance from Sur Rounding MaterialsSafe Ways to Reduce Clearances Fireplace and Mantel Trim Clearances Fireplace and Mantel Trim ShieldsStove Clearance Unprotected Surfaces Protected Surfaces Defiant Clearance ChartUnprotected Surfaces Protected Surfaces Defiant Clearance DiagramsStove Heat Shields Defiant With Rear Heat Shield only Distance from the Center of the Flue Collar to the WallSet Up Your Stove AssemblyInstall Stove Legs Install the Optional Bottom Heat ShieldDefiant Controls OperationTwo Ways to Add Fuel Single Air Control Regulates Heat Output and Burn TimeDamper Directs Air Flow Within the Stove Andirons Help Protect the Glass Infra-Red Reflective Glass Panels For Clear Fire ViewingBurn Only High-Quality Wood Surface Thermometer is a Valuable Guide to OperationHigh-Efficiency Wood Burning With Catalytic Combustion Use the Air Control Settings that Work Best for YouDefiant Control Settings Starting and Maintaining a Wood Fire Conditioning Your StoveAdd larger pieces of wood as the fire begins to burn Refuel While the Embers Are Still HotAsh Disposal Steel Chimney Draft ManagementIndoor/Outdoor Location Flue SizingSingle Venting Draft TestingCreosote FuelConclusion Negative PressureMaintenance Adjust the Damper as Needed How to Adjust the Door LatchesCheck the Operation Primary Air Shutter Tighten the Damper Handle as NeededWhen to Suspect a Combustor Problem Inspection and CleaningRemoving and Cleaning the Combustor Catalytic ElementRemove the bricks and the brick retainer 30001693 Replace the Stove Gaskets as NeededAdjust the Door Latch If Necessary Annual MaintenanceChimney System Permanent Defiant GasketsAppendix Catalytic Combustor For a fireplace Appendix Chimney and Fireplace HazardsDefiant Woodburning Stove Defiant Woodburning Stove Model Shell Enamel Parts Defiant Color Warranty CFM Corporation

1945 specifications

Vermont Casting, founded in 1975, quickly established itself as a leader in the cast iron stove industry. However, the reference to 1945 in relation to Vermont Casting might allude to the beginnings of the American hearth industry post-World War II. In this pivotal period, the demand for home heating solutions soared, setting the stage for innovations in wood and gas stoves that would shape future designs.

Vermont Casting made a name for itself through a commitment to craftsmanship and durability. The company utilized high-quality cast iron, renowned for its excellent heat retention and even heating properties. This robust material allowed stoves to radiate warmth long after the fire had extinguished, making them an efficient choice for home heating.

One of the standout features of Vermont Casting stoves is their unique design which blends functionality with aesthetic appeal. The company offered both traditional and contemporary styles, appealing to a wide range of consumer tastes. With elaborate decorative patterns and a classic look, Vermont Casting stoves became a centerpiece in many homes, adding warmth not just through heat but also through design.

In terms of technology, Vermont Casting pioneered advancements in combustion efficiency. Their stoves often feature secondary combustion systems that ensure the complete burning of wood, which helps reduce smoke emissions and maximizes heat output. This not only complies with stringent environmental regulations but also makes their products eco-friendly.

Another notable characteristic of Vermont Casting stoves is their versatility. The company produces a range of models that cater to different fuels, including wood, gas, and pellets. This flexibility allows homeowners to choose the best heating solution for their specific needs and preferences.

Vermont Casting also places a strong emphasis on user comfort and ease of use. Many models come equipped with features like airwash systems for cleaner glass, lever handles for easy door operation, and ash pans for convenient cleanup. These thoughtful details enhance the overall user experience, making heating homes more efficient and enjoyable.

As the company has continued to innovate, it has remained committed to sustainability, focusing on creating products that are not only effective but also environmentally responsible. Vermont Casting's dedication to quality, technology, and design has cemented its status as a trusted name in the hearth industry, making it a preferred choice for consumers looking for both performance and style in their heating solutions.
Top Page Image Contents