Jotul GF 400 DV manual Vent Termination Zones Natural Gas, Vertical Termination for

Vent Termination Zones - Natural Gas

	35 Ft.
(10.67 m)
			Horizontal and Vertical
	30 Ft.		Terminations for COAXIAL VENT
	(9.14 m)
			Up to four 45° or
	25 Ft.		two 90° elbows
	(7.62 m)		permitted in
RUN	A		addition to the
			starter elbow.
VERTICAL	20 Ft.		A
	(6.10 m)
	15 Ft.		B
	(4.57 m)
	12 Ft.		C
	(3.65 m)
	B	Min. Vertical	D
	8 Ft.
		Termination
	(2.43 m)
	5 Ft.
	(1.52 m)
	Min. Rise
	2 Ft.
	(.60 m)

5 Ft.	10 Ft.	15 Ft.	20 Ft.	27 Ft.
(1.52 m)	(3.05 m)	(4.57 m)	(6.09 m)	(8.22m)

HORIZONTAL RUN

•ALL VENTING MUST TERMINATE (END) WITHIN ONE OF THE SHADED AREAS.

•SET STOVE EXHAUST RESTRICTOR TO THE POSITION THAT CORRESPONDS TO THE VENT TERMINATION AREA IN THE DIAGRAM ABOVE.

•ALWAYS MAINTAIN THE PROPER CLEARANCES TO COMBUSTIBLES.

The circled letter designations in the vent diagram correspond to the Exhaust Restrictor Setting on the stove. First, determine which vent termination zone is appropriate for your installation and fuel type, then adjust the restrictor to the corresponding position as shown in Figure 7, page 9.

Figure 9. Coaxial Vent Termination Window / NG

Vertical

Termination for

COLINEAR VENT

35 Ft.

(10.67 m)

RUN
VERTICAL	25 Ft.

(7.62 m)

B

Minimum

Vertical

Termination

8Ft.

(2.43 m)

45° Elbow

Up

2 Ft.

(16 cm)

HORIZONTAL RUN

•VENTING MUST TERMI- NATE (END) WITHIN THE SHADED AREA.

•Adjust the Exhaust Restrictor to position B for any NG colinear termination.

Figure 10 . Colinear Termination / NG

10