Honeywell LYNXR-I manual System Overview

Page 13

SYSTEM OVERVIEW

5.TEST KEY: Tests the system and alarm sounder.

6.BYPASS KEY: Removes individual protection

zones from being monitored by the system. Displays currently bypassed zones.

Used to adjust volume of voice messages.

7.CODE KEY: Allows entry of additional user codes that can be given to other system users.

8.CHIME KEY: Turns the Chime mode on and

off. When on, any entry through a protected delay or perimeter zone while the system is disarmed will cause a tone and voice descriptor to sound at the keypad.

9.INTERNAL SOUNDER: Source of alarm sounds (see "Summary of Audible Notifications" section).

10.FUNCTION KEY: Allows alternate key

functions. It is used as a “repeat” key during Clock/Calendar setting.

11. NO DELAY KEY: Used with STAY or AWAY

function to eliminate the entry delay. Alarm sounds immediately if entry is opened.

12. STATUS KEY: When pressed prior to arming,

the keypad will display all open zones, and will announce system status.

13. LIGHTS ON / LIGHTS OFF KEYS: Turns

lights or other devices on or off, if programmed by the installer.

14. AUX / SELECT KEY: Can be programmed

to either perform a predefined function or to send a preset message to a pager or a “Follow Me” system phone number.

Master Keypad Definitions

15. STAY / DELETE KEY: Arms the perimeter

burglary protection, guarding protected doors, windows and other perimeter protection points, and sounds an alarm if one is opened. Interior protection is not armed, which allows movement within your house without causing an alarm. Entrance can be made through an entry delay zone without causing an alarm if the system is disarmed before the entry delay time expires. Used to delete messages.

16. AWAY / ADD KEY: Completely arms both

perimeter and interior burglary protection for backup protection by sensing an intruder's movements through protected interior areas as well as guarding protected doors, windows, etc. Entrance can be made through an entry delay zone without causing an alarm if the system is disarmed before the entry delay time expires. Used to accept “Follow Me” phone number and Clock/ Calendar mode entries.

17. OFF / ESCAPE KEY: Disarms the burglary

portion of the system, silences alarms and audible trouble indicators, and clears alarm trouble display after the problem has been corrected. Used to exit/abort “Follow Me” phone number and Clock/Calendar mode.

18.MICROPHONE: Used to record personal messages up to 85 seconds long, and for 2 way voice and speaker phone.

19.SPEAKER: Source of audible internal warning and confirmation sounds, status announcements, as well as alarms (see "Summary of Audible Notifications").

20.RECORD: Activates the recording function to record personal messages.

21.VOLUME: Sets the volume of system announcements and status beeps.

––KEYS 0-9:Used to enter your individual security access code(s).

– 13 –

Image 13
Contents Ademco LYNXR-I Page Table of Contents Page System Overview AUX Zones AlarmsFire Protection Burglary ProtectionGeneral Operation Two-Way Voice FeatureTo restart exit delay To arm in Stay modeTo arm in Away mode To arm with no DelayTo turn Test mode off To turn Test mode onTo remotely activate X10 devices To remotely activate X10 devices 7General About the Master KeypadArmed Ready Master Keypad DefinitionsSystem Overview LED Meanings About the Display and IndicatorsGeneral Information Checking System StatusPress the Status Key System Can Be ArmedArming In Away Mode Arming in Stay ModeRestarting Exit Delay While System Armed Arming the SystemTo arm with no Delay if Quick Arm is active Arming the System With No DelayQuick Arming Exit Delay Entry/Exit DelaysEntry Delay Exit Alarms Exit Alarm ActiveTo disarm the system and silence burglary alarms Memory of AlarmDisarming the System Bypassing Individual Zones Bypassing Protection ZonesForced Bypass Displaying Bypassed ZonesChime Mode Panic Keys / Chime ModePanic Keys Automatic Paging Paging FeatureCode Format Manual PagingFollow Me Reminder and System Announcements Follow Me Announcement FeatureSystem Announcements Reminder AnnouncementsTo delete Follow Me reminder telephone number To program Follow Me reminder telephone numberTo deactivate X10 devices 7 Device DescriptionsDevice Description Recording a Message Message Recording/Playback/Volume ControlMessage Playback Deleting MessagesTo adjust message playback/system announcement volume Adjusting the VolumeTo restore announcement sounding Defining the AUX Function AUX FunctionPerforming the AUX function Hour Clock/CalendarMinute MonthYear DayScheduling User Interface Schedule number = the value that was last stored in the memoryXx bd Entry Event Comment Event Identifier EntriesEntry Day Day of Week EntriesUsing Remote Phone Control Feature Remote Phone Control FeatureEnter To remotely arm in Away mode Remote Phone Control Commands To remotely disarm systemTo remotely deactivate X10 devices 1-6 # + 7 + device no To remotely Bypass zonesUsing the Speaker Phone Feature Speaker Phone FeatureUser Functions General Information Silencing a Fire AlarmCase of Fire Fire Alarm System Emergency Evacuation To Add/Delete a User or Change a Users Code Security CodesChanging the Master User Code Add a user codeEntering Test Mode Testing the System to be conducted weeklyExit Test Mode Typical Trouble Condition Displays Trouble MessagesRoutine Care Changing the LYNXR-I System Battery Low Battery Conditions in Wireless SensorsMaintaining your system Summary Of Audible Notification LED Meanings Federal Communications Commission FCC Part 15 Statement UL Notice This is a Grade a residential systemIndustry Canada Ringer Equivalence Number Notice Federal Communications Commission FCC PartEvent of Telephone Operational Problems Servicing Information Notifies Insert B = Burglary, F = Fire Owners Insurance Premium Credit RequestOwners Insurance Premium Credit Request Index Manual Paging Limitations of this Alarm System ONE Year Limited Warranty Page Page Page Page Page ‡K14115$Š