Honeywell LYNXR-I manual System Overview

Page 5

SYSTEM OVERVIEW

Features

General Information

This system offers you three forms of protection: burglary, fire, and emergency, depending on the configuration of your system. The system consists of a master keypad for controlling system operation, various wireless sensors that provide perimeter and interior burglary protection, and optional smoke or combustion detectors to provide early fire warning. In addition, optional wireless keypads may have been installed to allow you to control the system away from the master keypad. The system may also be controlled from a remote telephone and can be used as a speaker phone.

The system uses microcomputer technology to monitor all protection zones and system status, display appropriate information on the keypad display, and initiate appropriate alarms. Your system may also have been programmed to automatically send alarm or status messages over the phone lines to a central alarm monitoring station, and may also be capable of two-way voice communication with the central station.

The user features of this security system are listed below. Ask your installer which features have been programmed for your system.

STAY and AWAY arming modes: By using these modes you can protect either the perimeter only, or the entire premises.

3 panic key functions: Designated keys allow you to manually activate fire, personal emergency, or silent alarms. Refer to the PANIC KEYS section for detailed information.

Paging feature: If programmed by your installer this feature alerts you to certain system conditions by displaying code numbers that indicate the type of condition that has occurred. In addition, pressing the AUX key can send a predefined message to your pager, if programmed to do so (see AUX key function below). Refer to the PAGING FEATURE section for detailed information.

Follow me system announcements: Allows the LYNXR-I to dial a number, programmed by your installer, and deliver system announcements.

Follow me reminder announcements: Allows the LYNXR-I to dial a number, that you have specified, at a programmed time and day and deliver a message programmed by your installer.

Real-time clock: Keypad displays current time. Refer to the CLOCK/CALENDAR section for procedures for setting the time.

Voice announcement of system status: The master keypad’s built-in speaker announces system status at the press of a key. Refer to the CHECKING SYSTEM STATUS section for detailed information.

Message center: The system allows recording and play back of brief messages. Refer to the RECORDING/PLAYBACK MESSAGES section for procedures.

Device activation: Designated keys allow you to turn lights and/or other devices on and off. In addition, some devices (e.g., a light) may be programmed to activate automatically as a result of a system event such as an alarm or trouble condition. Refer to the USING POWERLINE CARRIER DEVICE COMMANDS section for detailed information.

– 5 –

Image 5
Contents Ademco LYNXR-I Page Table of Contents Page System Overview AUX Zones AlarmsFire Protection Burglary ProtectionGeneral Operation Two-Way Voice FeatureTo restart exit delay To arm in Stay modeTo arm in Away mode To arm with no DelayTo turn Test mode off To turn Test mode onTo remotely activate X10 devices To remotely activate X10 devices 7General About the Master KeypadArmed Ready Master Keypad DefinitionsSystem Overview LED Meanings About the Display and IndicatorsGeneral Information Checking System StatusPress the Status Key System Can Be ArmedArming In Away Mode Arming in Stay ModeRestarting Exit Delay While System Armed Arming the SystemQuick Arming Arming the System With No DelayTo arm with no Delay if Quick Arm is active Exit Delay Entry/Exit DelaysEntry Delay Exit Alarms Exit Alarm ActiveDisarming the System Memory of AlarmTo disarm the system and silence burglary alarms Bypassing Individual Zones Bypassing Protection ZonesForced Bypass Displaying Bypassed ZonesPanic Keys Panic Keys / Chime ModeChime Mode Automatic Paging Paging FeatureCode Format Manual PagingFollow Me Reminder and System Announcements Follow Me Announcement FeatureSystem Announcements Reminder AnnouncementsTo delete Follow Me reminder telephone number To program Follow Me reminder telephone numberDevice Description Device DescriptionsTo deactivate X10 devices 7 Recording a Message Message Recording/Playback/Volume ControlMessage Playback Deleting MessagesTo restore announcement sounding Adjusting the VolumeTo adjust message playback/system announcement volume Performing the AUX function AUX FunctionDefining the AUX Function Hour Clock/CalendarMinute MonthYear DayScheduling User Interface Schedule number = the value that was last stored in the memoryXx bd Entry Event Comment Event Identifier EntriesEntry Day Day of Week EntriesEnter Remote Phone Control FeatureUsing Remote Phone Control Feature To remotely arm in Away mode Remote Phone Control Commands To remotely disarm systemTo remotely deactivate X10 devices 1-6 # + 7 + device no To remotely Bypass zonesUsing the Speaker Phone Feature Speaker Phone FeatureUser Functions Case of Fire Silencing a Fire AlarmGeneral Information Fire Alarm System Emergency Evacuation To Add/Delete a User or Change a Users Code Security CodesChanging the Master User Code Add a user codeExit Test Mode Testing the System to be conducted weeklyEntering Test Mode Routine Care Trouble MessagesTypical Trouble Condition Displays Maintaining your system Low Battery Conditions in Wireless SensorsChanging the LYNXR-I System Battery Summary Of Audible Notification LED Meanings Industry Canada UL Notice This is a Grade a residential systemFederal Communications Commission FCC Part 15 Statement Ringer Equivalence Number Notice Federal Communications Commission FCC PartEvent of Telephone Operational Problems Servicing Information Notifies Insert B = Burglary, F = Fire Owners Insurance Premium Credit RequestOwners Insurance Premium Credit Request Index Manual Paging Limitations of this Alarm System ONE Year Limited Warranty Page Page Page Page Page ‡K14115$Š