Honeywell LYNXR-I manual To program Follow Me reminder telephone number

Page 24

USER FUNCTIONS

“Follow Me” Announcement Feature

NOTES: (1) The “Follow Me” announcement will be terminated if any new report needs to be sent or if any key is pressed on the LYNXR-I keypad or a wireless (RF) keypad. The [✻] key on a wireless keypad is ignored by the system when the “Follow me” feature is active and cannot be used to terminate the announcement or request status.

(2)If your LYNXR-I has been programmed to send “Follow Me” system messages upon arming/disarming do not make any key strokes after you have disarmed the system (unless it is necessary). Entering additional keystrokes will terminate the “Follow Me” message.

To program “Follow Me” reminder telephone number:

1.Enter:

+ Master user code

FUNCTION

+ [65]

2.The system will announce: “Enter follow me reminder phone number, press ADD to accept, press ESCAPE to quit”.

NOTES: (1) The system will accept all digits including the star [✻], pound [#]. To insert a two (2) second pause press the AUX key.

(2)If the

ESCAPE

key is pressed to cancel entry, the telephone number must be entered again.

(3)Pressing any key on a wireless (RF) keypad will terminate this mode and the “Follow Me” telephone number must be reentered.

3.Enter up to 24 digits. After each digit is entered the system will announce the digit and it will be displayed on the LCD screen. The system will not announce star, pound or pause, however “Str, Pnd, or PAU will be displayed on the LCD screen.

4.After you have entered the last digit press

ADD

to save the number. If 24 digits have been

entered the system will automatically save the number and exit the “Follow Me” announcement feature.

NOTE: The “Follow me” reminder telephone number can be changed as often as necessary by repeating steps 1 through 4.

To delete “Follow Me” reminder telephone number

1.Enter:

+ Master user code

FUNCTION

+ [65]

2.The system will announce: “Enter follow me reminder phone number, press ADD to accept, press ESCAPE to quit”.

3.Press

ADD

without entering any digits.

– 24 –

Image 24

Contents Ademco LYNXR-I Page Table of Contents Page System Overview AUX Alarms ZonesFire Protection Burglary ProtectionTwo-Way Voice Feature General OperationTo arm in Stay mode To restart exit delayTo arm in Away mode To arm with no DelayTo turn Test mode on To turn Test mode offTo remotely activate X10 devices To remotely activate X10 devices 7About the Master Keypad GeneralMaster Keypad Definitions Armed ReadySystem Overview About the Display and Indicators LED MeaningsChecking System Status General InformationPress the Status Key System Can Be ArmedArming in Stay Mode Arming In Away ModeRestarting Exit Delay While System Armed Arming the SystemArming the System With No Delay To arm with no Delay if Quick Arm is activeQuick Arming Entry/Exit Delays Exit DelayEntry Delay Exit Alarms Exit Alarm ActiveMemory of Alarm To disarm the system and silence burglary alarmsDisarming the System Bypassing Protection Zones Bypassing Individual ZonesForced Bypass Displaying Bypassed ZonesPanic Keys / Chime Mode Chime ModePanic Keys Paging Feature Automatic PagingCode Format Manual PagingFollow Me Announcement Feature Follow Me Reminder and System AnnouncementsSystem Announcements Reminder AnnouncementsTo program Follow Me reminder telephone number To delete Follow Me reminder telephone numberDevice Descriptions To deactivate X10 devices 7Device Description Message Recording/Playback/Volume Control Recording a MessageMessage Playback Deleting MessagesAdjusting the Volume To adjust message playback/system announcement volumeTo restore announcement sounding AUX Function Defining the AUX FunctionPerforming the AUX function Clock/Calendar HourMinute MonthDay YearScheduling User Interface = the value that was last stored in the memory Schedule numberXx bd Event Identifier Entries Entry Event CommentDay of Week Entries Entry DayRemote Phone Control Feature Using Remote Phone Control FeatureEnter Remote Phone Control Commands To remotely disarm system To remotely arm in Away modeTo remotely deactivate X10 devices 1-6 # + 7 + device no To remotely Bypass zonesSpeaker Phone Feature Using the Speaker Phone FeatureUser Functions Silencing a Fire Alarm General InformationCase of Fire Fire Alarm System Emergency Evacuation Security Codes To Add/Delete a User or Change a Users CodeChanging the Master User Code Add a user codeTesting the System to be conducted weekly Entering Test ModeExit Test Mode Trouble Messages Typical Trouble Condition DisplaysRoutine Care Low Battery Conditions in Wireless Sensors Changing the LYNXR-I System BatteryMaintaining your system Summary Of Audible Notification LED Meanings UL Notice This is a Grade a residential system Federal Communications Commission FCC Part 15 StatementIndustry Canada Federal Communications Commission FCC Part Ringer Equivalence Number NoticeEvent of Telephone Operational Problems Servicing Information Owners Insurance Premium Credit Request Notifies Insert B = Burglary, F = FireOwners Insurance Premium Credit Request Index Manual Paging Limitations of this Alarm System ONE Year Limited Warranty Page Page Page Page Page ‡K14115$Š