Honeywell LYNXR-I manual About the Display and Indicators, LED Meanings

Page 14

SYSTEM OVERVIEW

About the Display and Indicators

Display Definitions (for other displays, see Trouble Messages)

AWAY LOW BAT AC INSTANT CHIME TEST

STAY REC MESSAGE ALARM FIRE BYPASS FAULT

ALARM: Appears when the system is armed and an intrusion has been detected (also appears during a fire alarm or audible emergency alarm). Accompanied by the protection zone that is in alarm.

AWAY: All burglary zones, interior and perimeter, are armed.

INSTANT: Entry delay is turned off.

STAY: Perimeter burglary zones, such as protected windows and doors, are armed.

UL	LYNXR-I is not intended for UL985 Household Fire applications unless a 24-hour backup battery (P/N

	LYNXRCHKIT-HC) is installed.

FIRE: Appears when a fire alarm or fire fault is present. Accompanied by a display of the zone that is in alarm.

LOW BAT: Low battery condition in a wireless sensor (if zone number is displayed) or low system battery (if no zone number is displayed). If 00 is displayed, a wireless keypad (5827) has a low battery condition.

AC:Appears when AC power is present. If not displayed, the system is operating on backup battery power.

CHIME: Appears when the Chime feature is activated.

TEST: Appears when the system is in Test mode. Blinks during the last 5 minutes of test.

REC: Appears when the system is in Recording mode.

MESSAGE: Appears when a message has been recorded and has not yet been played back.

BYPASS: Appears when one or more burglary protection zones have been bypassed.

FAULT: Appears at any time a malfunction is discovered in the system; or any time an open is detected in a fire zone; or when a fault in a day/night burglary zone is discovered during a disarmed period. Accompanied by a display of the zone number in trouble.

PH:Appears in place of the clock when the speaker phone mode is active.

PC:Appears during a remote phone control session.

LED Meanings

ARMED LED: ON = System armed

(Red)	OFF = System disarmed
	Blinking = System armed, but a fault exists
	Blinking alternately with READY LED = AVM (VOX or Talk) or speaker phone mode
	is active
READY LED:	ON = System disarmed, ready to arm
(Green)	OFF = System armed
	Blinking = System disarmed, not ready to arm (a fault exists)
	Blinking alternately with ARMED LED = AVM (VOX or Talk) or speaker phone
	mode is active.

– 14 –

Image 14

Contents Ademco LYNXR-I Page Table of Contents Page System Overview AUX Fire Protection AlarmsZones Burglary ProtectionTwo-Way Voice Feature General OperationTo arm in Away mode To arm in Stay modeTo restart exit delay To arm with no DelayTo remotely activate X10 devices To turn Test mode onTo turn Test mode off To remotely activate X10 devices 7About the Master Keypad GeneralMaster Keypad Definitions Armed ReadySystem Overview About the Display and Indicators LED MeaningsPress the Status Key Checking System StatusGeneral Information System Can Be ArmedRestarting Exit Delay While System Armed Arming in Stay ModeArming In Away Mode Arming the SystemQuick Arming Arming the System With No DelayTo arm with no Delay if Quick Arm is active Entry Delay Entry/Exit DelaysExit Delay Exit Alarms Exit Alarm ActiveDisarming the System Memory of AlarmTo disarm the system and silence burglary alarms Forced Bypass Bypassing Protection ZonesBypassing Individual Zones Displaying Bypassed ZonesPanic Keys Panic Keys / Chime ModeChime Mode Code Format Paging FeatureAutomatic Paging Manual PagingSystem Announcements Follow Me Announcement FeatureFollow Me Reminder and System Announcements Reminder AnnouncementsTo program Follow Me reminder telephone number To delete Follow Me reminder telephone numberDevice Description Device DescriptionsTo deactivate X10 devices 7 Message Playback Message Recording/Playback/Volume ControlRecording a Message Deleting MessagesTo restore announcement sounding Adjusting the VolumeTo adjust message playback/system announcement volume Performing the AUX function AUX FunctionDefining the AUX Function Minute Clock/CalendarHour MonthDay YearScheduling User Interface = the value that was last stored in the memory Schedule numberXx bd Event Identifier Entries Entry Event CommentDay of Week Entries Entry DayEnter Remote Phone Control FeatureUsing Remote Phone Control Feature To remotely deactivate X10 devices 1-6 # + 7 + device no Remote Phone Control Commands To remotely disarm systemTo remotely arm in Away mode To remotely Bypass zonesSpeaker Phone Feature Using the Speaker Phone FeatureUser Functions Case of Fire Silencing a Fire AlarmGeneral Information Fire Alarm System Emergency Evacuation Changing the Master User Code Security CodesTo Add/Delete a User or Change a Users Code Add a user codeExit Test Mode Testing the System to be conducted weeklyEntering Test Mode Routine Care Trouble MessagesTypical Trouble Condition Displays Maintaining your system Low Battery Conditions in Wireless SensorsChanging the LYNXR-I System Battery Summary Of Audible Notification LED Meanings Industry Canada UL Notice This is a Grade a residential systemFederal Communications Commission FCC Part 15 Statement Federal Communications Commission FCC Part Ringer Equivalence Number NoticeEvent of Telephone Operational Problems Servicing Information Owners Insurance Premium Credit Request Notifies Insert B = Burglary, F = FireOwners Insurance Premium Credit Request Index Manual Paging Limitations of this Alarm System ONE Year Limited Warranty Page Page Page Page Page ‡K14115$Š