Honeywell LYNXR-I manual Panic Keys / Chime Mode

Page 21

SECURING THE PREMISES

Panic Keys / Chime Mode

Panic Keys

Your system may have been programmed to use special keys to manually activate panic functions. The functions that might be programmed are listed below. See your installer for the function(s) that may have been programmed for your system.

Your installer should note the functions that are active in your system.

		Active Panic Functions
Keys	Zone	Function
1 and ✻	95
3 and #	96
✻ and #	99

To use a paired key panic function, simply press both keys of the assigned pair at the same time. If your keypad has lettered keys for panic functions, press the designated key and hold down for at least 2 seconds to activate the panic function. Panic keys can also be activated by wireless devices such as the Ademco 5827. Ask your installer about this feature.

Types of Panic Alarms

A silent emergency/silent alarm sends an alarm signal to the alarm monitoring company,† but there will be no audible alarms or visual displays.

An audible emergency/audible alarm sends an emergency message to the alarm monitoring

company† and sounds a loud, steady alarm at your keypad and at any external sounders that may be connected (“ALARM” plus a zone number are also displayed).

A personal emergency/aux alarm sends an emergency message to the alarm monitoring company† and sounds at keypads, but not at external sounders. (“ALARM” plus a zone number are also displayed).

A supervised fire alarm sends a fire alarm message to the alarm monitoring company† and uniquely activates keypad and any external sounders (“FIRE ALARM” plus a zone number are also displayed).

† If your system is connected to an alarm monitoring company

Chime Mode

Your system can be set to alert you to the opening of a door or window, while it is disarmed, by using CHIME mode. When activated, three beeps will sound at the keypad whenever a protected perimeter door is opened and the zone voice descriptor will be announced. Pressing the STATUS key will display

the open protection points.

Note that the Chime mode can be turned on only when the system is disarmed.

To turn Chime mode on or off: FUNCTION + CHIME

The “CHIME” message displays while Chime mode is on, and disappears from the display when Chime mode is off.

– 21 –

Image 21

Contents Ademco LYNXR-I Page Table of Contents Page System Overview AUX Zones AlarmsFire Protection Burglary ProtectionGeneral Operation Two-Way Voice FeatureTo restart exit delay To arm in Stay modeTo arm in Away mode To arm with no DelayTo turn Test mode off To turn Test mode onTo remotely activate X10 devices To remotely activate X10 devices 7General About the Master KeypadArmed Ready Master Keypad DefinitionsSystem Overview LED Meanings About the Display and IndicatorsGeneral Information Checking System StatusPress the Status Key System Can Be ArmedArming In Away Mode Arming in Stay ModeRestarting Exit Delay While System Armed Arming the SystemArming the System With No Delay To arm with no Delay if Quick Arm is activeQuick Arming Exit Delay Entry/Exit DelaysEntry Delay Exit Alarms Exit Alarm ActiveMemory of Alarm To disarm the system and silence burglary alarmsDisarming the System Bypassing Individual Zones Bypassing Protection ZonesForced Bypass Displaying Bypassed ZonesPanic Keys / Chime Mode Chime ModePanic Keys Automatic Paging Paging FeatureCode Format Manual PagingFollow Me Reminder and System Announcements Follow Me Announcement FeatureSystem Announcements Reminder AnnouncementsTo delete Follow Me reminder telephone number To program Follow Me reminder telephone numberDevice Descriptions To deactivate X10 devices 7Device Description Recording a Message Message Recording/Playback/Volume ControlMessage Playback Deleting MessagesAdjusting the Volume To adjust message playback/system announcement volumeTo restore announcement sounding AUX Function Defining the AUX FunctionPerforming the AUX function Hour Clock/CalendarMinute MonthYear DayScheduling User Interface Schedule number = the value that was last stored in the memoryXx bd Entry Event Comment Event Identifier EntriesEntry Day Day of Week EntriesRemote Phone Control Feature Using Remote Phone Control FeatureEnter To remotely arm in Away mode Remote Phone Control Commands To remotely disarm systemTo remotely deactivate X10 devices 1-6 # + 7 + device no To remotely Bypass zonesUsing the Speaker Phone Feature Speaker Phone FeatureUser Functions Silencing a Fire Alarm General InformationCase of Fire Fire Alarm System Emergency Evacuation To Add/Delete a User or Change a Users Code Security CodesChanging the Master User Code Add a user codeTesting the System to be conducted weekly Entering Test ModeExit Test Mode Trouble Messages Typical Trouble Condition DisplaysRoutine Care Low Battery Conditions in Wireless Sensors Changing the LYNXR-I System BatteryMaintaining your system Summary Of Audible Notification LED Meanings UL Notice This is a Grade a residential system Federal Communications Commission FCC Part 15 StatementIndustry Canada Ringer Equivalence Number Notice Federal Communications Commission FCC PartEvent of Telephone Operational Problems Servicing Information Notifies Insert B = Burglary, F = Fire Owners Insurance Premium Credit RequestOwners Insurance Premium Credit Request Index Manual Paging Limitations of this Alarm System ONE Year Limited Warranty Page Page Page Page Page ‡K14115$Š