Whirlpool 1187361 manual To operate air conditioner with remote control, To select the mode

To operate air conditioner with remote control

	POWER
	ON/OFF
Auto Cool
Cool	Turbo
Fan Only	High
	FAN
	SPEED
Power Saver	Low

Temp / Time

Timer

NOTE: Two AA batteries (not included) power the remote control. Replace batteries after 6 months of use, or when the remote control starts to lose power.

To turn the air conditioner on or off:

Press POWER ON/OFF.

POWER

ON/OFF

To select the mode:

Press AUTO COOL, COOL, FAN ONLY, or POWER SAVER.

■Auto Cool - fan speed is adjusted automatically.

■Fan Only - fan speed is automatically set at Turbo.

■Cool or Power Saver - you can adjust the fan speed.

Auto Cool

Cool

Fan Only

Power Saver

To select the fan speed (in Cool or Power Saver mode only):

Press TURBO, HIGH or LOW.

Turbo

High

FAN

SPEED

Low

To raise the temperature:

Press the up arrow button. Each time you press or hold the up arrow button, the temperature will increase 1º until it reaches 86°F (30ºC).

To lower the temperature:

Press the down arrow button. Each time you press or hold the down arrow button, the temperature will decrease 1º until it reaches 64°F (18ºC).

To set the Timer for a 1- to 24-hour delay until the air conditioner turns off (the air conditioner must be On):

1.Press TIMER. Indicator light on air conditioner will flash.

Timer

2.Press the up arrow or down arrow button to change delay time (1 to 24 hours).

3.Press TIMER again or wait 10 seconds. Indicator light on air conditioner will remain on.

To set Timer to turn on air conditioner, keeping previous settings:

1.Turn off air conditioner.

2.Press TIMER. Indicator light on air conditioner will flash.

3.Press the up arrow or down arrow button to change delay time (1 to 24 hours).

4.Press TIMER again or wait 10 seconds. Indicator light on air conditioner will remain on.

To set Timer to turn on air conditioner, changing the previous settings:

1.Turn on air conditioner.

2.Adjust MODE to Auto, Cool, Fan Only, or Power Saver.

3.Adjust FAN SPEED to Turbo, High or Low.

4.Adjust temperature between 64°F (18ºC) and 86°F (30ºC).

5.Wait 3 seconds before turning off air conditioner.

6.Press TIMER. Indicator light on air conditioner will flash.

7.Press the up arrow or down arrow button to change delay time (1 to 24 hours).

8.Press TIMER again or wait 10 seconds. Indicator light on air conditioner will remain on.

12