Whirlpool 1187361 manual Attach support legs, Thin wall construction vinyl, wood, etc

Attach support legs

1.Determine the correct slots on the tray side from the type of exterior construction of the building.

Thin wall construction (vinyl, wood, etc.)

1

1. 1st and 2nd slots

Thick wall construction (brick)

1

1.2nd and 3rd slots

2.Insert carriage bolt up through slot on tray-frame side and support leg.

3.Place one end of tray center over carriage bolt.

4.Then place flat washer, lock washer and hex nut.

NOTE: Do not tighten. The leg must be able to move freely to adjust angle when installed.

		1
		2
		3
		4
		5
1.	Hex nut	4. Tray center
2.	Lock washer	5. Carriage bolt

3.Flat washer

5.Insert second carriage bolt through tray side and attach other end of support leg.

NOTE: Do not tighten. The leg must be able to move freely to adjust angle when installed.

1

2

3

4

1.	Hex nut	3.	Flat washer
2.	Lock washer	4.	Carriage bolt

6.Install support leg on other side.

6