Starting Your Air Conditioner -
Rotary Control
Models without Power Saver
Models with Power Saver
1.Remove clear protective film from front panel badge (on some models).
2.Set exhaust control. See “Exhaust Control (on some models).”
3.Select the fan speed. See “Fan Speed.”
4.Select temperature. See “Temperature.”
Exhaust Control (on some models)
Push the Exhaust control CLOSED for maximum continuous cooling. Pull the Exhaust control OPEN to allow you to draw stale or smoky air from the room.
■Open - pull to exhaust room air to the outside
■Closed - push to circulate room air
The Exhaust control will function only when the Fan Speed control is operating.
Fan Speed
Set FAN SPEED to the desired setting. When the air conditioner is operating at Low Cool, High Cool, or Turbo Cool, the fan circulates air continuously.
■Turbo Cool - for maximum cooling
■High Cool - for normal cooling
■Low Cool - for sleeping comfort
■Fan Only - to move air continuously without cooling NOTE: Fan runs on Turbo speed only.
■Power Saver (on some models) - fan runs only when cooling is needed. Fan stops circulating air when the room temperature matches the Temperature control setting.
Since the fan does not circulate the room air continuously, less energy is used, but the room air is not circulated as often. Use Power Saver when you are asleep or away from home.
NOTE: Fan runs on Low speed only.
Models without Power Saver
Models with Power Saver
Temperature
Turn the TEMPERATURE control to a
13