Whirlpool 1187361 manual Prepare Air Conditioner for Installation, Install in window

Install in window

1.From inside, place SMART-MOUNT™tray, support legs facing down, in the window. Match the holes in tray side with the predrilled holes in windowsill.

2.Using 2 - #10 - 12 x 1¹⁄₂ in. slot-head wood screws, secure the tray-frame assembly to the window.

Prepare Air Conditioner for Installation

1.Locate provided bag of pan-head screws.

2.Place the top channel on top of the air conditioner, lining up the holes in top channel with the holes on top of air conditioner.

3.Using 3 - #10 x ³⁄₈ in. pan-head screws, attach top channel to air conditioner.

1

1

2

1. #10 - 12 x 1¹⁄₂ in. slot-head wood screws

NOTE: If the exterior of building can be damaged by support legs, place a board between the wall and support legs.

3.With tray center pushed away from the windowsill, place a level on the angled edge of tray side. Check to be sure level is against notch on tray side. Adjust SMART-MOUNT™tray until bubble indicates level.

1.Top channel

2.#10 x ³⁄₈ in. pan-head screw

Install side curtains

NOTE: Attach curtains to unit before placing unit in window.

1.Insert curtain into curtain frame. Make sure the curtain end locks into curtain frame.

1

1. Place level on angled edge against notch on tray side

4.Tighten the hex nut just enough to hold tray center in place.

5.Repeat with other side.

6.Tighten hex nuts securely with ⁷⁄₁₆ in. wrench.

2. Push curtain in all the way.

7