Areas > Commands >
Chime On/Off | MENU |
Chime mode allows you to monitor a zone (or group of zones) to sound the keypad buzzer or activate a programmable output when the corresponding area is turned off (disarmed). This can be useful when you need to monitor the front or back entrance to the premises.
This menu allows a user to turn chime mode on or off. Only keypads programmed to sound the chime tone will be heard when a zone programmed for chime is faulted.
The master user can Set Chime Zones on page 16. This allows the master user to program which zones can be monitored for chime.
Enter programming mode (PIN + MENU) then,
1.Enter [MENU] + [2] + [0] + [5].
A list of different areas will display on the keypad.
A001 Reception Area
A002 Sales Dept
A003 Administration Dept
Press OK or MENU
| Solution 64 User Guide | |
Areas > Area Properties > |
|
|
Area Name |
| MENU |
This menu allows you to program the name for each area. Each area name can be programmed with up to 16 characters. At factory default, only Area 1 is used. The Solution 64 control panel can have a maximum of 8 independent areas programmed.
Enter programming mode (PIN + MENU) then,
1.Enter [MENU] + [2] + [1] + [0].
A list of different areas will display on the keypad.
2.Use the [↑] and [↓] keys to select the area that you want to program the name, then press [OK] to select. Alternatively, you can enter the area number that you want to program the name, then press [OK].
The keypad will display the following:
Area Name A001
Area 1 Name
Press ◄► OK to SAVE
2.Use the [↑] and [↓] keys to select the area that you want to turn chime mode on or off, then press [OK] to select. Alternatively, you can enter the area number that you want to turn chime mode on or off, then press [OK].
The keypad will display the following when chime mode is turned off:
Reception Area A001
Chime Is OFF,
To Turn ON, Press ON.
To Go Back Press OK
The keypad will display the following when chime mode is turned on:
Reception Area A001
Chime Is ON,
To Turn OFF, Press OFF.
To Go Back Press OK
3.Press the [ON] key to turn chime mode on, or, press [OFF] to turn chime mode off.
4.Press the [OK] key to exit.
3.Use the [←] and [→] keys to scroll the cursor left and right across the area name text. Use the [↑] and [↓] keys to scroll through the different characters available. To clear all text from the cursor position to the right, press the [OFF] key.
4.When the user name is complete, press [OK].
Inputs
Your Solution 64 control panel has up to a maximum 64 zones. When the optional radio receiver is fitted any available zone may be programmed as a wireless zone. Your installer will advise you on the exact makeup and configuration of your system.
Inputs > Commands >
Zone Status | MENU |
This menu allows you to view the zone status of each zone (i.e. Normal, Open or Short).
Enter programming mode (PIN + MENU) then,
1.Enter [MENU] + [3] + [0] + [0].
A list of different zones will display on the keypad.
2.Use the [↑] and [↓] keys to select the zone that you want to turn view the status information then press [OK] to select. Alternatively, you can enter the zone number that you want to view status information, then press [OK].
The keypad will display the following zone status information:
Zone 1 Name Z001
EOL=Normal 06523 ohms
Press OK or MENU
3.Press the [OK] key to exit.
Bosch Security Systems |
| 09/06 |
| BLCC110U | 15 |
|
|