Bosch Appliances 9 6 BLCC110U manual Call Forward On Number, Call Forward Off Number, Customer

Solution 64 User Guide

Domestic Phone Number 3

6789_

Press  0-9 OK to SAVE

6.Using the numeric keys, enter all the digits of the third telephone number (if required).

You can change a single digit by scrolling the cursor left [←] and right [→]. For special characters (eg. , = pause * or # etc), use the [↑] and [↓] keys. To clear all text from the cursor position to the right, press the [OFF] key.

7.Press [OK] to save and exit, or press [MENU] to cancel.

Comms > Commands >

Call Forward On Number MENU 5-1-6

When you leave your premises, you no longer need to remember to manually activate the Call Forward On feature via the telephone. These addresses allow you to program the Call Forward On sequence that the Solution 64 control panel will automatically use when you turn Area 1 ‘On’.

In Australia, a typical sequence of activating the Call-Forward On

– After Time (All Calls) is described below:

For other countries please substitute the appropriate commands after consultaion with your telephone company.

Enter programming mode (PIN + MENU) then,

1.*61 (To turn Call Forward On – After Time).

2.Telephone number that you want calls to go to (e.g. 0416123456).

3.*5# (End of Call Forward sequence after 5 seconds).

Therefore, you would program the above steps as follows: *610416123456*5#.

Comms > Commands >

Call Forward Off Number MENU 5-1-7

When you enter your premises, you no longer need to remember to manually disable the Call Forward feature via the telephone. These addresses allow you to program the Call Forward Off sequence that the Solution 64 control panel will automatically use when you turn Area 1 ‘Off’.

In Australia, a typical sequence of activating the Call Forward Off feature is described below:

For other countries please substitute the appropriate commands after consultaion with your telephone company.

Enter programming mode (PIN + MENU) then,

1.#61 (To turn Auto-Forward After Time - Off).

2.# (End of Call-Forward sequence).

Therefore, you would program the above steps as follows: #61#

1.Enter [MENU] + [5] + [1] + [7].

The keypad will display the current call-forward off sequence.

Call Forward Off N001

_

Press  0-9 OK to SAVE

2.Using the numeric keys, enter all the digits of the call forward off sequence.

You can change a single digit by scrolling the cursor left [←] and right [→]. For special characters (eg. , = pause, * or # etc), use the [↑] and [↓] keys.

1.Enter [MENU] + [5] + [1] + [6].

The keypad will display information for telephone number 1.

Call Forward On N001

Press  0-9 OK to SAVE

2.Using the numeric keys, enter all the digits of the call forward on sequence.

You can change a single digit by scrolling the cursor left [←] and right [→]. For special characters (eg. , = pause * or # etc), use the [↑] and [↓] keys.

3.Press [OK] to save and exit, or press [MENU] to exit without saving.

3.Press [OK] to save and exit, or press [MENU] to exit without saving.

Comms > Registration >

Customer MENU 5-5-0

Reserved for future use

22 Bosch Security Systems

09/06

BLCC110U