Bosch Appliances 9 6 BLCC110U manual Bypass Zones, Set Chime Zones, Z001 Zone 1 Name 

Page 16

Solution 64 User Guide

Inputs > Commands >

Bypass Zones

MENU 3-0-2

This menu allows you to bypass or un-bypass a single or multiple zones before you turn the area All On, Part On or Part 2 On. When bypassing zones, it disables the ability for a zone to detect intrusion and sound an alarm.

A burglary zone will automatically become un-bypassed when you turn the corresponding area off (disarm). Any 24-Hr fire or 24-Hr non fire zones will need to be manually un-bypassed.

Enter programming mode (PIN + MENU) then,

1.Enter [MENU] + [3] + [0] + [2].

A list of zones that can be bypassed will display on the keypad. A ‘√’ displayed on the right side of the zone name indicates that the zone is already bypassed.

Z001 Zone 1 Name

Z002 Zone 2 Name

Z003 Zone 3 Name

Press  OK or MENU

Inputs > Commands >

Set Chime Zones

MENU 3-0-3

This menu allows you to program zones to be monitored when the system is turned off. Chime mode is ideal to monitor a front door to sound the keypad buzzer when opened (faulted).

Enter programming mode (PIN + MENU) then,

1.Enter [MENU] + [3] + [0] + [3].

A list of areas will display on the keypad.

2.Use the [] and [] keys to select the area that you want to program zones for chime mode, then press [OK]. Alternatively, you can enter the area number that you want to program chime zones, then press [OK].

The keypad will list all zones that can be programmed for chime mode. A ‘’ displayed on the right side of the zone name indicates that the zone is already set for chime.

Z001 Zone 1 Name

Z002 Zone 2 Name

Z003 Zone 3 Name

Press  OK or MENU

2.Use the [↑] and [↓] keys to select the zone that you want to bypass, then press [OK]. Alternatively, you can enter the zone number that you want to bypass, then press [OK].

If the zone is bypassed, the keypad will prompt:

Zone 1 Name Z001 is bypassed. To un-bypass, press OFF.

Press OK or MENU

If the zone is not bypassed, the keypad will prompt:

Zone 1 Name Z001 is un-bypassed. To bypass, press ON.

Press OK or MENU

3.Press [ON] or [OFF] to toggle the zone to be bypassed/un- bypassed.

4.Press [OK] to save and exit, or press [MENU] to exit without saving.

Repeat steps 1 to 4 to bypass or un-bypass additional zones.

3.Use the [↑] and [↓] keys to select the zone that you want to set for chime, then press [OK]. Alternatively, you can enter the zone number that you want to set for chime, then press [OK].

If the zone is not programmed for chime, the keypad will prompt:

Zone 1 Name Z001

Zone Chime is OFF,

To turn ON, Press ON.

To Go Back Press OK

If the zone is programmed for chime, the keypad will prompt:

Zone 1 Name Z001

Zone Chime is ON.

To turn OFF, Press OFF.

To Go Back Press OK

4.Press [ON] or [OFF] to toggle the zone to be monitored when chime mode is turned on.

5.Press [OK] to save and exit, or press [MENU] to exit without saving.

16

Bosch Security Systems

09/06

BLCC110U

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Solution Copyright Notice Trademarks Telepermit NoteContents Access Areas Inputs Outputs Program Menu TreeExample Comms Devices SystemNtroduc tion FeaturesUser’s Guide Reporting Alarms About the KeypadFor 2 sec Keypad KeysAlarm Don’t exit before the delay time expires and anExit delay door is faulted, an alarm occurs To indicate you have exited Menu modeBasic System Operation Silencing AlarmsTurning An Area All On System Programming Change Own PINEnter New PIN for Press OK or MenuAdd PIN Change Other PINDelete PIN Add Token Delete TokenToken Status Add KeyfobUser Name Delete KeyfobArea Assignment Timer Group Access AssignmentArea Status A001 Main OfficeArea 1 Name Turn Area On/OffTurn All Areas On Turn All Areas OffChime On/Off Area NameZone Status A001 Reception Area Bypass Zones Set Chime ZonesZ001 Zone 1 Name  Z002 Zone 2 Name Z003 Zone 3 Name Press  OK or MenuSmoke Sensor Reset Smoke detector reset Progress. Please waitSet Part 2 Zones Zone NameWalk Test a Single Zone Walk Test All ZonesOutput Status Turn Output On/Off Output NameOutput 1 Name O001 Is Off and Ready Press OK or Menu Output 1 Name O001 Is on and Ready Press OK or MenuExternal Siren Test Internal Siren TestStrobe Test A002 Area 2 NameCall/Answer RAS Call Forward On/OffCheck Web Email Email System LogCall Forward Off Number Call Forward On NumberCustomer Volume Send Test ReportLAN Status ContrastKeypad 001 Backlight Press OK to Save Panel StatusSystem Trouble Z001 Zone 1 NameTrouble Condition Description History Log Set Date & TimeName TimeStart / Stop Day DayKeypad Hi/Lo Temp Battery Test Battery test in progress Please waitIf the battery has passed the test, the keypad will display Battery test Passed Press OK to continueInstallation Details Ndex AreasSmoke Detectors
Top Page Image Contents