Bosch Appliances 9 6 BLCC110U manual Reporting Alarms, About the Keypad, For 2 sec, Keypad Keys

Solution 64 User Guide

Reporting Alarms

Your system may be programmed to send reports to your security company. Once the report is complete, the system returns the telephone to normal operation (check with your security company).

Your system makes repeated attempts to send reports to your security company. If your system fails to report, the keypad will display the ‘service’ symbol.

About the Keypad

Your keypad has 20 keys or buttons. The buttons allow you to input instructions and navigate the menu screens as required. Some buttons have a secondary function which is activated by holding them down for two seconds.

Each button’s function is described below:

Keypad Keys

Key Description

Key	Description
	The [] key allows you to navigate
	through menus or to toggle characters
	when programming telephone numbers.
	Pressing The [] key will display current
	trouble conditions when the area that the
	keypad is displaying is disarmed.

Pressing the 1 and 3 keys together and

+holding them down for 2 seconds will cause a Panic alarm to be triggered. If

for 2 sec	programmed the sirens will sound and the
	monitoring station will be notified.
	Pressing the 4 and 6 keys together and

+holding them down for 2 seconds will cause a Fire alarm to be triggered. If programmed

for 2 sec	the sirens will sound and the monitoring
	station will be notified.
	Pressing the 7 and 9 keys together and

+holding them down for 2 seconds will cause a Medical alarm to be triggered. If

to

The numeric keys allow you to enter you numbers when required

Use the [MENU] and the numeric keys to enter commands. The [MENU] key is also used to go back one level when navigating through menus or to exit a programming location without saving changes.

The [ON] key allows you to turn an area or output on. To turn all areas on at the same time when the system has been partitioned, press and hold the [ON] key for two seconds.

The [PART] key allows you to turn an area Part On. This key can also be used to bypass a zone or multiple zones when you press and hold for two seconds.

The [OFF] key allows you to turn an area or output off. To turn all areas off at the same time when the system had been partitioned, press and hold the [OFF] key for two seconds.

The [OK] key allows you to save any changes and exit the command.

The [MAIL] key allows you to read stored mail. This key can also be used to initiate a dialler test when you press and hold for two seconds.

The [] key allows you to move the cursor left when programming text or telephone numbers.

The [] key allows you to move the cursor right when programming text or telephone numbers.

The [↑] key allows you to navigate through menus or to toggle characters when programming telephone numbers.

for 2 sec	programmed the sirens will sound and the
	monitoring station will be notified.
	Table 2: Keypad Keys and Their Function

Status Icons / LED’s

The following table describes the function of each of the status icons.

Icon	Status	Meaning
	The keypad can display which areas (1 – 8) are
	turned on or off via the Area Icon Indicators. This
	programmable option can be disabled in MENU
	On	The area is turned All On or Part On
	Off	The area is turned Off
	Flashing	The area has an alarm
	Fast
	On	System power is normal
	Flashing	System power is missing
	Flashing	A fire alarm is active
	Off	No fire alarm
	On	Fire alarm in memory
		(Turn the area All On and Off to Clear).
	On	The existing service or trouble condition
		has been acknowledged.
	Off	No service or trouble conditions exist
	Flashing	A service or trouble condition is present
		that has not been acknowledged.
	On	The area is turned Part On.
	Off	The area is not turned Part On.

6 Bosch Security Systems

09/06

BLCC110U