Ntroduc tion, Features | Bosch Appliances 9 6 BLCC110U manual

I ntroduc tion

Your system helps to secure life, property and investments against ﬁre, theft and bodily harm. It consists of a keypad (or keypads), sensors such as motion detectors or devices located on doors and windows, and other sensing devices designed to detect the presence of smoke or combustion. The location and quantity of sensing devices will have already been discussed with you by your alarm installer.

Control of your security system is achieved through the unique Graphic keypad, which displays all system information in written text and graphical symbols. Its versatility and ease of operation, make it ideal for any home or business application.

Features

Listed below are the main features of the Solution 64 control panel.

Up to 64 Fully Programmable Zones

Fire Alarm Verification

Up to 48 Unique PINs

Up to 5 Relay Outputs (1 amp rating)

3 Open Collector Outputs

Supervised Siren Driver

8 Programmable Schedules

Up To 8 Areas (Common Area Programmable)

Built-In Dialler

Up To 8 Fully Supervised Graphic Keypads

Keyswitch Input (Programmable)

256 History Event Memory

EMI / Lightning Transient Protection

Programmable Via Keypad

Remote Programmable Via Upload/Download Software

Alarm Event Memory

Automatic Test Reports

Built-In Telephone Line Fail Monitor

User’s Guide

This user’s guide shows you how to use and maintain your security system. It covers basic functions, such as turning the system on and oﬀ as well as some general programming. More complex programming and system conﬁguration should be performed by your installer.

Many of the programming functions described in this guide will have already been programmed by your alarm installer while others may need to be programmed or changed by you. Depending on your particular system conﬁguration some features described in this manual may not be available. Please discuss this with your alarm installer.

Functions outlined in this user guide may require you to enter your PIN (Personal Identiﬁcation Number) so make sure you choose a number that is easy to remember. For security reasons do not write this code down or give it to anyone else. If more than one person needs to operate the system then you should create a unique code for them if this has not been done by your installer. This guide will explain how to do this.

Please take the time to familiarise your self with the following terms before reading the rest of this guide.

Zones

A ‘Zone’ is a detection device, or group of devices connected to your security system. Zones are identiﬁed by the area they monitor, such as a front door, bedroom window or hallway.

Faulted Zones

Solution 64 User Guide

When a zone (such as a door or window) is closed, it is said to be ‘normal’. When the door or window is open, the zone is said to be ‘faulted’. When you turn your system on, you will usually want all of the zones in your system to be normal, although, you can turn your system on with faulted zones.

Zones Types

There are two basic types of zones, Non 24-hour and 24-hour. See below.

Non 24-Hour Zones

Non 24-hour zones respond to alarm conditions depending upon whether the system is turned on or oﬀ. They are programmed to either respond instantly to alarm conditions or to provide a delay for you to reach the keypad and turn the system oﬀ. Various zones will be located throughout your premises.

When you turn your system on, you have the option of turning on all zones (All On), or just some of the zones (Part On). Refer to

All On and Part On, on page 7 for more information.

Bypassed Zones

A zone which has been bypassed will remain unarmed when the system is armed. You may need to bypass a zone when doing renovations in the building or if a sensor becomes faulty. Bypassed zones will reset the next time the system is disarmed.

24-Hour Zones

24-hour zones are always on and cannot be turned oﬀ, even when the system is turned oﬀ (disarmed). There are two types of 24-hour zones, ﬁre zones and non-ﬁre zones.

What Is An Area?

The Solution 64 control panel comes defaulted and programmed for a single area conﬁguration (Area 1), therefore, all zones are assigned to Area 1. The alarm system can be divided into 8 individual areas running oﬀ the same control panel. In this case, the security company would assign diﬀerent sensors (zones) to each area according to the area they belong.

Example:

Partitioning a commercial business to 4 individual areas may be as follows:

Area 1 – Main entry/exit area

Area 2 – Sales

Area 3 – Administration

Area 4 – Dispatch

Each area can be controlled individually as if they were separate alarm systems.

All On

When you turn an area All On, you are turning on all non 24-hour zones, both interior (motion detectors) and perimeter (doors and windows of the building).

Part On

When you turn an area Part On, you only turn on some of the non 24-hour zones. Your security company will program which zones are included in this portion. Part zones may include only the perimeter (doors and windows) or your system, or sensors in other areas of your premises. Check with your security company to learn which zones are Part zones.

Bosch Security Systems		09/06		BLCC110U	5