CANCELING THEAUTOMATIC START UP TIMER
To cancel the automatic start up timer do one of the following;
1.Start the vehicle manually with the use of the ignition key and depress the brake pedal.
2.Remote start the vehicle using your keychain RF transmitter.
ADDITIONAL REMOTE FUNCTION CHANNEL 2
The system has an additional feature, ( Channel 2) ,that can be connected to a number of different optional accessories. Some of the more common uses for this channel are:
Remote Trunk Release
Remote Window Close Remote Garage Door Interface
To operate the accessory associated with channel 2, press and hold the channel 2 button(s) of your keychain transmitter for four seconds.
NOTE: The feature that has been added to channel 2 will always be operated using the same transmitter button that controls the remote start unit. There is no way to move the channel 2 function to a different channel.
ADDITIONAL REMOTE FUNCTION CHANNEL 3
The system has an additional feature, ( Channel 3) ,that can be connected to a number of different optional accessories. Some of the more common uses for this channel are:
Remote Trunk Release
Remote Window Close Remote Garage Door Interface
To operate the accessory associated with channel 3, press and release the channel 3 button(s) of your keychain transmitter. Note: The channel 3 output will remain active for as long as the transmitter button(s) are held. Certain accessories may take advantage of the extended output capability of this channel. Check with your installation center for operation of the accessory that may be connected to channel 3.
Settings
Transmitter Button(s)
Page 7
128-5027
7 of 24