d)Unlatch the Spider Stopper Guards and remove. Figure 16.
Figure 16
e)Remove the manifold bracket and unscrew the two wing nuts that hold the manifold to the cooking box. Pull the manifold and valve assembly out of the burners and carefully set it down. Figure 17.
View from behind cooking box
Wing nuts
Figure 17
f)Slide the burner assembly out from under the guide screw and washer in the corners of the cooking box. Figure 18.
Guide screw
Figure 18
g)Lift and twist the burner assembly slightly, to separate the crossover tube from the burners. Figure 19. Remove the burners from the cooking box.
Crossover tube
Figure 19
h) To reinstall burners, reverse steps c) through g).
mCAUTION: The burner openings must be positioned properly over the valve orifices. Figure 20 (a).
Check proper assembly before fastening manifold in place. Figure 20 (b).
(a)
Valve
Burner
(b)
Figure 20
37