Weber 3400 Series owner manual Assembly, Step, Check package contents

Page 7

Assembly

Tools needed

Screwdrivers, regular

and Phillips

Hammer

7/16, 5/8, 11/16 and 3/4 inch open-end or two adjustable wrenches

Pliers

Block of wood

Step 1

Check package contents

Cooking box (assembly)

Lid (assembly)

® ®

LP tank

Supplies needed

Your LP tank is shipped empty for safety. After setting the LP fuel scale you will need to fill it. (See Step "Fill LP tank").

You will need a soap and water solution to check for gas leaks. (See Step “Check for gas leaks”).

Note - The hardware size of nuts, bolts and screws is given. For example "1/4-20 x 2 inch bolt" means a bolt 1/4 inch in diameter with 20 threads to the inch, 2 inches long. On a small screw for example, "6-32 x 1/2 inch screw" means a number 6 screw, with 32 threads to the inch, 1/2 inch long.

Filler adapter

Bottom tray

Front panel

Two accessory trays

Control panel

7

Image 7
Contents Platinum 3400 Series LP GAS Units only Warranty Patents and Trademarks Contents Operating area For Installation in CanadaGeneral Instructions StorageCheck package contents AssemblyStep Page Page Check contents of hardware packs Assemble frame Assemble wheelsComplete frame assembly Continue frame assemblyInstall left end panel Check the frame assemblyInsert casters Install side burner locks Install the three back panelsAdd cooking box Install manifold bracket Install side burnerMWARNING Make sure gas supply is OFF Install right end panel Install tank panel assemblyInstall bottom accessory trays Install igniterAdd fuel scale Check that all burner valves are off Install left hand swing tableInstall right hand swing table Hinge rod View from rear of barbecue Connect LP tank MCAUTION Do not remove adjustment wing nut from tank scaleSet LP fuel scale Fill LP tankMWARNING Do not ignite burners while leak checking Check for gas leaksInstall Flavorizer Bars and Cooking Grates Install the lid Install the bottom trayMCAUTION Make sure both locks have snapped into place Secure the side burnerComplete accessory installation Install glass doorsTo Extinguish LightingManual Lighting Lighting only the side burner. Figure Lighting the side burnerStorage and/or Nonuse Periodic CleaningCooking Storage and/or NonuseRefilling the LP tank Connecting the filled LP tankRemoval of the LP tank Engaged Liquid Propane LP Tanks Safe handling tips for LP GasInspection and Cleaning of the Weber Spider Stopper Guards Annual MaintenanceWeber Spider Stopper Guards General MaintenanceMain Burner Cleaning Procedure MCAUTION Do not enlarge the burner ports when cleaningTo reinstall burners, reverse steps c through g Crossover Ignition System Operations Page NCAUTION Do not line the bottom tray with aluminum foil Burner does not light, or flame is low in High positionSide Burner Maintenance Side Burner TroubleshootingFlame is low in High position 15-16 18-20 NWARNING Use only Weber factory Parts ListAuthorized parts. The use of any part that is Final Word Thanks