Regency L900-NG, L900-LP installation manual Burner Tube, 03-44, 03-45 03-41 03-43

INSTALLATION

5) Place the left end of log 03-43 into the pin while fitting the notch	8) Spread all of the Embers on the bottom brick panel around the burner
onto the burner tube. Slide the right end of the log forward until it is	tube and on the inside of the grate as shown.
approximately 3/8" away from the back side of the grate.

03-43

Embers on bottom brick panel.

Burner Tube

6)Line up the two holes on the underside of log 03-44 with the pins on logs 03-41 and 03-42 and fit in place.

03-44

Embers on inside of grate.

03-41

9) Spread the vermiculite on the base brick panel covering the remaining exposed base brick.

03-42

7)Line up the two holes on the underside of log 03-45 with the pins on logs 03-41 and 03-43 and fit in place.

03-45

03-41

03-43

INSTALLATION

Regency® L900 Direct Vent Gas Fireplace 37