Nortec Industries Airfog Series installation manual Troubleshooting

1. TROUBLESHOOTING

	Table 1.	Troubleshooting
Part	Possible Failure	Symptoms	Solution
Vacuum Valve	Diaphragm Failure	Nozzle sputter.	Replace defective
		Low output.	component.
		No output.
	Pilot Safety Regulator	Nozzles sputter.	Repair regulator using
	Diaphragm Ripped	Air in water line.	repair kit.
		Low output.
		No Output.
		Water drips from bonnet.
	Valve Seat O-Ring	Pressure water line resulting	Replace o-ring, rebuilt
		in heavy mist.	vacuum valve.
		Could damage main
		diaphragm.
		No control of output.
	Other O-rings	Vacuum leak, low output, no	Replace.
		output.
		Water leaks out.
	Cracked Housing	Vacuum leak or water dripping	Replace damaged
		from valve.	component.
	Blockage	Reduced output.	Clean.
		No output.
Pilot Air	Damaged Diaphragm	Loss in air pressure.	Repair.
Regulator		No air pressure.
		Uncontrolled air pressure.
	Stuck Closed Or Open	Unable to adjust pressure.	Disassemble and clean.
Pilot Water	Damaged Diaphragm	Loss in water pressure.	Repair.
Regulator		No water pressure.
		Uncontrolled water pressure.
	Stuck Closed Or Open	Unable to adjust pressure.	Disassemble and clean.

10-60

Page 42 2008-04-11