OPERATING INSTRUCTIONS
REAR SQUEEGEE
Figure 38
TO BEGIN THE CLEANING OPERATION
1.Select the operating mode
NORMAL = ESP
2.Lower brushes to the desired position.
SCRUB DECK = NORMAL RANGE OR HEAVY
3.Place the squeegee switch in the lower position.
SQUEEGEE BLADE = LOWER
4.Move solution control knob to the desired setting and begin operation.
SCRUBBING THE AVERAGE FLOOR WITH LIGHT TO MEDIUM SOILAGE
In this operation, cleaning is accomplished in one pass, with simultaneous solution feed, scrubbing and dirty water pick up. The rate of solution feed and the speed of travel required will vary with floor condition. This knowledge will come with operator experience.
SMART |
|