Nilfisk-ALTO 692003 manual Broom Lift ARM Broom Idler

MAINTENANCE

REMOVE BROOM LIFT ARM

Fig. 84

BROOM IDLER

Fig. 86

BROOM LIFT ARM

BROOM IDLER

Fig. 85

SLIDE BROOM ONTO

BROOM IDLER

Fig. 87

INSTALLED BROOM

Fig. 88

Remove broom lift arm as shown in figure 84 and 85. Remove the main broom from the from the broom idler exposing the main broom compartment as shown in figure 86. Check and clean out the main broom compartment before installing the new main broom. Slide the main broom onto the broom idler as shown in figure 87. Replace the broom lift arm and rotate the broom lift arm knobs clockwise to tighten into place as shown in figure 88. Adjust the main broom to 1-1/2” to 2” sweep pattern.

AMERICAN-LINCOLN	1-55
SMART