Integra DTR-7.3 Send/Learn indicator, On/Standby button, Sleep button, Macro 1, 2 button

Page 12

Index parts and facilities

Send/Learn indicator

Lights red when signals are sent by the remote controller. It also flashes when a button is pressed when the battery power is low.

On/Standby button [28]

On: Press to turn on the DTR-7.3.

Standby: Press to place the DTR-7.3 in the standby state.

Be aware that pressing the Standby button only places the DTR-7.3 in standby and does not turn the power completely off.

Sleep button [30]

Press to set the sleep function.

The SLEEP button enables you to set the DTR-7.3 to turn off automatically after a specified time period.

Macro 1, 2 button [71]

Press to program or execute the macro function.

Mode buttons and indicators [28, 61]

Press to select the component to be operated by the remote controller. When a Mode button is pressed, it will light for 8 seconds. The selected Mode button will also light whenever any other operation button is pressed.

Return button [40]

Press to enter the selected setting and return to the previous menu.

CH button [35]

Press to select a preset channel for the tuner.

CH Sel button [32, 45]

Press to select a speaker channel when adjusting the speaker level.

Audio Sel button [33]

Press to select the audio input signal. The setting changes from “Auto” to “Multich” to “Analog” and back each time this button is pressed.

Level / buttons [32, 45]

Press to adjust the volume of the speaker selected using the CH Sel button.

Operation buttons [61]

Press to operate other devices connected to the DTR-7.3.

Input Selector buttons [29, 36-38]

Press to select an input source.

Same as the input selector buttons on the front panel of the DTR-7.3. The input source for each button is given here. DVD:DVD, CD:CD, V1:VIDEO1, V2:VIDEO2, V3:VIDEO3, V4:VIDEO4, V5:VIDEO5, TAP:TAPE, TUN:FM/AM, PH:PHONO.

Listening mode buttons [31, 51]

You can select a listening mode.

Re-EQ button [54, 57]

Depending on the listening mode, you can turn the Re-EQ function on or off.

Display button [32]

For changing the display in the front display.

Dimmer button [32]

Adjusts the display brightness.

There are three settings available: normal, dark, and very dark.

Light button

Press to turn on and off the lights in the buttons of the remote controller.

Setup button [40]

Press to display the Setup Menu on the TV screen and in the display. Press again to exit the menu.

///, ENTER button [40]

When in the Setup Menu, press the upper and lower arrow buttons to select an item, press the right and left arrow buttons to select parameter values or modes, and press the ENTER button to advance to the next item.

VOL button [29]

Press to adjust the volume.

Test button [45]

This button is used to set the speaker output levels. Use this button in conjunction with the Level / and CH Sel buttons to calibrate the speakers levels without entering the Setup Menu.

Muting button [30]

Press to activate the mute function.

Zone 2 button [36]

Press to perform operations on the remote zone.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents DTR-7.3 Important Safeguards AvisPrecautions Contents Contents Features Supplied accessoriesBefore using this unit Installing the remote controller batteriesUsing the remote controller Index parts and facilities Front panelIndex parts and facilities Front panel display Remote controller Send/Learn indicator Mode buttons and indicators 28On/Standby button Sleep buttonRear panel Connecting to Audio/Video equipment Connecting to Audio/Video equipment Connecting your audio componentsConnecting a compact disc player CD Connecting a turntable PhonoConnecting your video components Connecting a DVD PlayerFlow of the video signals is as follows Connecting a DVD player DVDConnecting a television monitor or projector Monitor OUT Connecting a video cassette recorder VideoSignal flow Connecting video camera, etc. Video 5 Input VideoConnecting speakers Ideal speaker configurationMinimum speaker configuration for surround sound playback Speaker placementConnecting speakers Connecting speakersUsing the speaker labels Connecting antennas Connecting the AM antenna cableConnecting the included antennas Assembling the AM loop antennaConnecting antennas Connecting the remote zone Zone 2 speakers When using the Surr BACK/ZONE 2 Speakers terminalsWhen using the Zone 2 OUT terminals When using the Surr BACK/ZONE 2 PRE OUT terminalsIR OUT Connections for remote control Connecting the power cords from other devicesMiscellaneous Connections RS 232 portConnecting to an external device with 12V Trigger terminal Connecting to devices with analog multi channel outputConnecting auxiliary power amplifier Miscellaneous ConnectionsConnecting the power Turning on the powerTurning on the power from the remote controller Enjoying music or videos with the DTR-7.3 Basic operationTo change the display of the input source from Tape to MD Adjusting the bass and treble Listening with headphonesUsing the sleep time remote controller only Enjoying music or videos with the DTR-7.3Changing the listening mode Setup Enter ReturnWhile playing back DTS sources While playing back Analog/PCM sourcesSwitching the display Adjusting the brightness of the front displayTemporarily changing the speaker output levels Changing the audio mode Enjoying the multichannel outputTuning into a radio station Listening to a stereo radio station FM modeListening to Radio Broadcasts Presetting a radio station Selecting a preset radio stationErasing a preset radio station Listening to Radio BroadcastsUsing the buttons on the DTR-7.3 Adjusting the volume for the remote zoneEnjoying music in the remote zone Recording a source Rec OutStart recording at the recording component as desired Recording a source Press the Rec Out buttonSetup Menu Basic MenuAdvanced Menu Setup Menu Navigating through the Setup MenuPress the Setup button Hardware Setup Hardware Setup MenuSurr Back/Zone 2 Sub-menu Speaker Impedance Sub-menuHardware Setup IR in Setup Sub-menuSpeaker Setup Speaker Setup MenuSpeaker Config Sub-menu Speaker Setup Speaker Distance Sub-menuUsing the remote controller Press the Test button Press the Test button to complete the procedureLevel Calibration Sub-menu Calibrating the speaker levelsInput Setup Input Setup MenuInitial settings for each input source Digital InputInput Setup Digital FormatInput source selected Multichannel Video Setup Sub-menu Last Valid enables the source last selected Select to haveVideo Component VideoIntelliVolume Sub-menu IntelliVolumeCharacter Input Sub-menu Character DisplayListening Mode Preset Sub-menu Relationship between input source and listening modeListening Mode Type of softwareInput source signals Listening ModesTrigger Setup Sub-menu Audio Adjust Audio Adjust Setup MenuSetting Values Initial value Tone Control Sub-menuAudio Adjust Delay Sub-menuSound Effect Sub-menu Theater Dimensional Sub-menu LFE Level Sub-menuMono Sub-menu Surround Sub-menu THX Sub-menu Setting Tone Control Listening mode TrebleSound Effect Bass Re-EQVolume Setup Sub-menu PreferencePreference Menu Headphones Level Setup Sub-menu OSD Setup Sub-menuPreference OSD Position Sub-menuUsing remote controller Rcvr ModeOverview Controlling an Integra/Onkyo cassette tape deckUsing remote controller Controlling an Integra/Onkyo DVD playerOn Standby CD Mode Disc Press the CD Mode buttonControlling an Integra/Onkyo CD player On Standby SAT/MD Mode Press the SAT/MD Mode buttonControlling an Integra/Onkyo MD recorder Rec RecordEntering a pre-programming code Learning a pre-programming codeVOL DisplaySetting No Entering a pre-programming codePre-programming codes Operating your programmed remote controller DVD Mode DVD Player ModeSAT Mode Satellite Tuner Mode Cable Mode Cable ModeOperating your programmed remote controller VCR Mode VCR ModeTV Mode TV Mode Programming procedure Light Macro 1 MacroErasing the programmed command from one button Erasing all the commands programmed under a Mode buttonPress and release the same Mode button again Press and release the same button againUsing the macro function What is the macro function?Programming the macro Executing the macroUsing the macro function Erasing all commands and macros that have been programmedErasing a macro from the Macro 1 or 2 button Troubleshooting guide Troubleshooting guide Video and AudioIf one of the messages shown below appears Specifications Internet radio features Net-Tune FeaturesConnecting the DTR-7.3 to your Ethernet Network Modem To the WAN side To the LAN side portEnjoying Music on Internet Radio or NAS-2.3 Enjoying Internet radioEnjoying Music on Internet Radio or NAS-2.3 Playing a music file saved in NAS-2.3Using the Alphanumeric keys To cancel the operationUse the / buttons to select one of the menu Caps Press the Enter buttonConfiguring Various Settings Network Setup MenuConfiguring Various Settings Proxy Setup Sub-menuIP Address Sub-menu MAC Address Sub-menuTroubleshooting guide SpecificationsAppendix

DTR-7.3 specifications

The Integra DTR-7.3 is a state-of-the-art AV receiver designed for audiophiles and home theater enthusiasts who seek a blend of performance, flexibility, and advanced technology. With a powerful amplifier section, the DTR-7.3 delivers an exceptional audio experience, providing crystal-clear sound reproduction across all frequencies.

At the heart of the DTR-7.3 is the ability to deliver 9.2 channels of amplification, making it an ideal choice for a comprehensive home theater setup. It supports various speaker configurations, allowing users to create immersive surround sound environments. The receiver is equipped with sophisticated DSP (Digital Signal Processing) that enhances audio fidelity while supporting multiple audio formats, including Dolby Atmos, DTS:X, and IMAX Enhanced. These technologies enable sound to move in a three-dimensional space, wrapping listeners in a dynamic auditory experience.

One of the standout features of the DTR-7.3 is its 4K Ultra HD video capabilities, ensuring that users can enjoy high-quality imagery with up to 60 frames per second. The receiver is equipped with HDR (High Dynamic Range) support, allowing for deeper contrast and more vibrant colors. Additionally, it includes multiple HDMI inputs and outputs, making it easy to connect to various devices, including gaming consoles, Blu-ray players, and streaming devices.

Connectivity is also a strong suit of the DTR-7.3. It supports Wi-Fi, Bluetooth, and Ethernet, granting users the ability to stream music from a variety of online services without the hassle of physical connections. The receiver is compatible with various music streaming protocols such as AirPlay, Spotify Connect, and TIDAL, allowing for seamless access to a vast library of audio content.

The DTR-7.3 also includes an advanced room calibration system that optimizes sound according to the specific acoustics of the room. This feature automates the tuning process, ensuring that every listening position benefits from balanced sound.

In addition, the user-friendly interface and the Integra Remote App make it easy to operate, allowing users to control their home theater setup from their smartphones or tablets. With its impressive combination of features, advanced technologies, and easy connectivity, the Integra DTR-7.3 stands out as a top-tier choice for anyone looking to elevate their home entertainment experience.
Top Page Image Contents