Integra DTR-7.3 instruction manual Connecting to Audio/Video equipment

Page 14

Connecting to Audio/Video equipment

•Be sure to always refer to the instructions that came with the component that you are connecting.

•Do not plug in the power cord until all connections have been properly made.

•For input jacks, red connectors (marked R) are used for the right channel, white connectors (marked L) are used for the left channel, and yellow connectors (marked V) are used for video connection.

•Insert all plugs and connectors securely. Improper connections can result in noise, poor performance, or damage to the equipment.

Improper connection

Inserted completely

•Do not bind audio/video connection cables with power cords and speaker cables. Doing so may adversely affect the picture and sound quality.

•The optical digital jacks are all of the shutter-type construction. Connect an optical cable by first making sure the cable is oriented correctly and then inserting it into the jack pushing the shutter lid inwards.

Rear optical jack

Front optical jack

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cables are depicted in the connection diagrams as shown below.

Left (white)

L

 

 

 

Audio connection cable

Right (red)

R

 

PR

PR

 

PB

PB

Component video

Y

Y

connection cable

 

 

 

Video connection cable

 

 

S video connection cable

 

 

Coaxial cable

 

 

Optical cable

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents DTR-7.3 Important Safeguards AvisPrecautions Contents Contents Features Supplied accessoriesUsing the remote controller Before using this unitInstalling the remote controller batteries Index parts and facilities Front panelIndex parts and facilities Front panel display Remote controller On/Standby button Send/Learn indicatorMode buttons and indicators 28 Sleep buttonRear panel Connecting to Audio/Video equipment Connecting a compact disc player CD Connecting to Audio/Video equipmentConnecting your audio components Connecting a turntable PhonoFlow of the video signals is as follows Connecting your video componentsConnecting a DVD Player Connecting a DVD player DVDConnecting a television monitor or projector Monitor OUT Connecting a video cassette recorder VideoSignal flow Connecting video camera, etc. Video 5 Input VideoMinimum speaker configuration for surround sound playback Connecting speakersIdeal speaker configuration Speaker placementUsing the speaker labels Connecting speakersConnecting speakers Connecting the included antennas Connecting antennasConnecting the AM antenna cable Assembling the AM loop antennaConnecting antennas When using the Zone 2 OUT terminals Connecting the remote zone Zone 2 speakersWhen using the Surr BACK/ZONE 2 Speakers terminals When using the Surr BACK/ZONE 2 PRE OUT terminalsIR OUT Miscellaneous Connections Connections for remote controlConnecting the power cords from other devices RS 232 portConnecting auxiliary power amplifier Connecting to an external device with 12V Trigger terminalConnecting to devices with analog multi channel output Miscellaneous ConnectionsTurning on the power from the remote controller Connecting the powerTurning on the power To change the display of the input source from Tape to MD Enjoying music or videos with the DTR-7.3Basic operation Using the sleep time remote controller only Adjusting the bass and trebleListening with headphones Enjoying music or videos with the DTR-7.3While playing back DTS sources Changing the listening modeSetup Enter Return While playing back Analog/PCM sourcesTemporarily changing the speaker output levels Switching the displayAdjusting the brightness of the front display Changing the audio mode Enjoying the multichannel outputListening to Radio Broadcasts Tuning into a radio stationListening to a stereo radio station FM mode Erasing a preset radio station Presetting a radio stationSelecting a preset radio station Listening to Radio BroadcastsEnjoying music in the remote zone Using the buttons on the DTR-7.3Adjusting the volume for the remote zone Start recording at the recording component as desired Recording a sourceRec Out Recording a source Press the Rec Out buttonAdvanced Menu Setup MenuBasic Menu Press the Setup button Setup MenuNavigating through the Setup Menu Surr Back/Zone 2 Sub-menu Hardware SetupHardware Setup Menu Speaker Impedance Sub-menuHardware Setup IR in Setup Sub-menuSpeaker Config Sub-menu Speaker SetupSpeaker Setup Menu Speaker Setup Speaker Distance Sub-menuLevel Calibration Sub-menu Using the remote controller Press the Test buttonPress the Test button to complete the procedure Calibrating the speaker levelsInitial settings for each input source Input SetupInput Setup Menu Digital InputInput source selected Multichannel Input SetupDigital Format Video Video Setup Sub-menuLast Valid enables the source last selected Select to have Component VideoCharacter Input Sub-menu IntelliVolume Sub-menuIntelliVolume Character DisplayListening Mode Listening Mode Preset Sub-menuRelationship between input source and listening mode Type of softwareInput source signals Listening ModesTrigger Setup Sub-menu Setting Values Initial value Audio AdjustAudio Adjust Setup Menu Tone Control Sub-menuSound Effect Sub-menu Audio AdjustDelay Sub-menu Mono Sub-menu Theater Dimensional Sub-menuLFE Level Sub-menu Surround Sub-menu THX Sub-menu Sound Effect Bass Setting Tone ControlListening mode Treble Re-EQPreference Menu Volume Setup Sub-menuPreference Preference Headphones Level Setup Sub-menuOSD Setup Sub-menu OSD Position Sub-menuOverview Using remote controllerRcvr Mode Controlling an Integra/Onkyo cassette tape deckUsing remote controller Controlling an Integra/Onkyo DVD playerControlling an Integra/Onkyo CD player On Standby CD Mode DiscPress the CD Mode button Controlling an Integra/Onkyo MD recorder On Standby SAT/MD ModePress the SAT/MD Mode button Rec RecordVOL Entering a pre-programming codeLearning a pre-programming code DisplayPre-programming codes Setting NoEntering a pre-programming code SAT Mode Satellite Tuner Mode Operating your programmed remote controllerDVD Mode DVD Player Mode Cable Mode Cable ModeTV Mode TV Mode Operating your programmed remote controllerVCR Mode VCR Mode Programming procedure Light Macro 1 MacroPress and release the same Mode button again Erasing the programmed command from one buttonErasing all the commands programmed under a Mode button Press and release the same button againProgramming the macro Using the macro functionWhat is the macro function? Executing the macroErasing a macro from the Macro 1 or 2 button Using the macro functionErasing all commands and macros that have been programmed Troubleshooting guide Troubleshooting guide Video and AudioIf one of the messages shown below appears Specifications Internet radio features Net-Tune FeaturesConnecting the DTR-7.3 to your Ethernet Network Modem To the WAN side To the LAN side portEnjoying Music on Internet Radio or NAS-2.3 Enjoying Internet radioEnjoying Music on Internet Radio or NAS-2.3 Playing a music file saved in NAS-2.3Use the / buttons to select one of the menu Using the Alphanumeric keysTo cancel the operation Caps Press the Enter buttonConfiguring Various Settings Network Setup MenuIP Address Sub-menu Configuring Various SettingsProxy Setup Sub-menu MAC Address Sub-menuAppendix Troubleshooting guideSpecifications

DTR-7.3 specifications

The Integra DTR-7.3 is a state-of-the-art AV receiver designed for audiophiles and home theater enthusiasts who seek a blend of performance, flexibility, and advanced technology. With a powerful amplifier section, the DTR-7.3 delivers an exceptional audio experience, providing crystal-clear sound reproduction across all frequencies.

At the heart of the DTR-7.3 is the ability to deliver 9.2 channels of amplification, making it an ideal choice for a comprehensive home theater setup. It supports various speaker configurations, allowing users to create immersive surround sound environments. The receiver is equipped with sophisticated DSP (Digital Signal Processing) that enhances audio fidelity while supporting multiple audio formats, including Dolby Atmos, DTS:X, and IMAX Enhanced. These technologies enable sound to move in a three-dimensional space, wrapping listeners in a dynamic auditory experience.

One of the standout features of the DTR-7.3 is its 4K Ultra HD video capabilities, ensuring that users can enjoy high-quality imagery with up to 60 frames per second. The receiver is equipped with HDR (High Dynamic Range) support, allowing for deeper contrast and more vibrant colors. Additionally, it includes multiple HDMI inputs and outputs, making it easy to connect to various devices, including gaming consoles, Blu-ray players, and streaming devices.

Connectivity is also a strong suit of the DTR-7.3. It supports Wi-Fi, Bluetooth, and Ethernet, granting users the ability to stream music from a variety of online services without the hassle of physical connections. The receiver is compatible with various music streaming protocols such as AirPlay, Spotify Connect, and TIDAL, allowing for seamless access to a vast library of audio content.

The DTR-7.3 also includes an advanced room calibration system that optimizes sound according to the specific acoustics of the room. This feature automates the tuning process, ensuring that every listening position benefits from balanced sound.

In addition, the user-friendly interface and the Integra Remote App make it easy to operate, allowing users to control their home theater setup from their smartphones or tablets. With its impressive combination of features, advanced technologies, and easy connectivity, the Integra DTR-7.3 stands out as a top-tier choice for anyone looking to elevate their home entertainment experience.
Top Page Image Contents