Integra DTR-7.3 Configuring Various Settings, IP Address Sub-menu, Proxy Setup Sub-menu

Page 83

Configuring Various Settings

5-1. IP Address Sub-menu

You can use this submenu to turn on/off the DHCP and Auto IP functionality.

Also, you can use this menu to manually configure network settings. Referring to the documentation from your ISP, enter the IP address and subnet mask assigned to your DTR-7.3 as well as the IP addresses of the default gateway and DNS server.

After necessary settings complete, press the Return button to go back to “5. Network Setup Menu”, select “→ Save Settings”, and press the Enter button to save the setting you made.

When you set a.DHCP/AUTO IP to Off, select an menu item under b. and press the Enter or button, the DTR-7.3 enters the number-entry mode.

Select a number using the / buttons, and press the Enter button to enter the number.

After all the necessary numbers are entered, the DTR-7.3 exits the number-entry mode.

a. DHCP/AUTO IP

Sets whether the network setting is configured automatically or not.

On: The network setting will be configured automatically. When you set this option to On, the values for b. through f. will be assigned using DHCP.

Off: The network setting is configured manually.

b. IP Address

You will enter this value when you set the a.DHCP/AUTO IP setting above to Off.

Enter the IP address assigned to your DTR-7.3. If your DTR-7.3 is directly connected with an xDSL modem or terminal adapter, be sure to enter the static IP address exactly as specified by your ISP.

Specify the IP address within the range below. The NAS-2.3 cannot be used with the IP addresses out of the ranges below.

CLASS A: 10.0.0.0–10.255.255.255

CLASS B: 172.16.0.0–172.31.255.255

CLASS C: 192.168.0.0–192.168.255.255

Because the most of the routers commercially available is set to the CLASS C IP address, specify the CLASS C IP address for the DTR-7.3.

c. SUBNET Mask

You will enter this value when you set the a.DHCP/AUTO IP setting above to Off.

Enter the subnet mask. If your DTR-7.3 is directly connected with an xDSL modem or terminal adapter, be sure to enter the subnet mask exactly as specified by your ISP. Usually, enter 255.255.255.0 here.

d. Gateway

You will enter this value when you set the a.DHCP/AUTO IP setting above to Off.

Enter the IP address of the default gateway. If your DTR-7.3 is directly connected with an xDSL modem or terminal adapter, be sure to enter the gateway address exactly as specified by your ISP. If your DTR-7.3 is connected to a gateway/router, enter the IP address of the gateway/ router.

DNS Server

e.1st

f.2nd

You will enter this value when you set the a.DHCP/AUTO IP setting above to Off.

Enter the IP address of the DNS server. If your DTR-7.3 is directly connected with an xDSL modem or terminal adapter, be sure to enter the DNS address exactly as specified by your ISP.

When your Internet service provider provides only one DNS address with you, enter this address into “e.1st”. When two or more DNS addresses are provided, enter two of them into “e.1st” and “f.2nd” respectively.

Note:

After setting, allow approx. 2 seconds until the DTR-7.3 stores all of the data in the memory. Be sure not to turn off the power during that time otherwise the data will be lost.

5-2. Proxy Setup Sub-menu

Configure this item if your DTR-7.3 uses a proxy server to connect to the Internet.

Enter the proxy server settings exactly as specified by your ISP.

After necessary settings complete, press the Return button to go back to “5. Network Setup Menu”, select “→ Save Settings”, and press the ENTER button to save the setting you made.

a. Proxy Server

Sets whether the DTR-7.3 connects to Internet radio station through proxy server or not.

On: Connects to Internet radio station through Proxy Server.

Off: Connect to Internet radio station without Proxy Server.

b. Proxy Address

Enter the domain name of the proxy server.

When you set a.Proxy Server to On, select this menu item and press the ENTER or button, the DTR-7.3 enters the character-entry mode. Select a character using the /// buttons, and press the ENTER button to enter the character.

After all the necessary characters are entered, the DTR-7.3 exits the character-entry mode.

c. Proxy Port

Enter the port number of the proxy server.

When you set a.Proxy Server to On, select this menu item and press the ENTER or button, the DTR-7.3 enters the number-entry mode. Select a number using the /// buttons, and press the ENTER button to enter the number.

After all the necessary numbers are entered, the DTR-7.3 exits the number-entry mode.

Note:

After setting, allow approx. 2 seconds until the DTR-7.3 stores all of the data in the memory. Be sure not to turn off the power during that time otherwise the data will be lost.

5-3. MAC Address Sub-menu

You can view the assigned MAC address. Every network port is identified by a unique MAC address. (This is read-only information.)

a. MAC Address

Displays the MAC address assigned to your DTR-7.3.

7

Page 82 Page 84
Image 83
Page 82 Page 84
Contents DTR-7.3 Avis Important SafeguardsPrecautions Contents Contents Supplied accessories FeaturesUsing the remote controller Before using this unitInstalling the remote controller batteries Front panel Index parts and facilitiesIndex parts and facilities Front panel display Remote controller Sleep button Send/Learn indicatorMode buttons and indicators 28 On/Standby buttonRear panel Connecting to Audio/Video equipment Connecting a turntable Phono Connecting to Audio/Video equipmentConnecting your audio components Connecting a compact disc player CDConnecting a DVD player DVD Connecting your video componentsConnecting a DVD Player Flow of the video signals is as followsConnecting a video cassette recorder Video Connecting a television monitor or projector Monitor OUTSignal flow Video Connecting video camera, etc. Video 5 InputSpeaker placement Connecting speakersIdeal speaker configuration Minimum speaker configuration for surround sound playbackUsing the speaker labels Connecting speakersConnecting speakers Assembling the AM loop antenna Connecting antennasConnecting the AM antenna cable Connecting the included antennasConnecting antennas When using the Surr BACK/ZONE 2 PRE OUT terminals Connecting the remote zone Zone 2 speakersWhen using the Surr BACK/ZONE 2 Speakers terminals When using the Zone 2 OUT terminalsIR OUT RS 232 port Connections for remote controlConnecting the power cords from other devices Miscellaneous ConnectionsMiscellaneous Connections Connecting to an external device with 12V Trigger terminalConnecting to devices with analog multi channel output Connecting auxiliary power amplifierTurning on the power from the remote controller Connecting the powerTurning on the power To change the display of the input source from Tape to MD Enjoying music or videos with the DTR-7.3Basic operation Enjoying music or videos with the DTR-7.3 Adjusting the bass and trebleListening with headphones Using the sleep time remote controller onlyWhile playing back Analog/PCM sources Changing the listening modeSetup Enter Return While playing back DTS sourcesTemporarily changing the speaker output levels Switching the displayAdjusting the brightness of the front display Enjoying the multichannel output Changing the audio modeListening to Radio Broadcasts Tuning into a radio stationListening to a stereo radio station FM mode Listening to Radio Broadcasts Presetting a radio stationSelecting a preset radio station Erasing a preset radio stationEnjoying music in the remote zone Using the buttons on the DTR-7.3Adjusting the volume for the remote zone Start recording at the recording component as desired Recording a sourceRec Out Press the Rec Out button Recording a sourceAdvanced Menu Setup MenuBasic Menu Press the Setup button Setup MenuNavigating through the Setup Menu Speaker Impedance Sub-menu Hardware SetupHardware Setup Menu Surr Back/Zone 2 Sub-menuIR in Setup Sub-menu Hardware SetupSpeaker Config Sub-menu Speaker SetupSpeaker Setup Menu Speaker Distance Sub-menu Speaker SetupCalibrating the speaker levels Using the remote controller Press the Test buttonPress the Test button to complete the procedure Level Calibration Sub-menuDigital Input Input SetupInput Setup Menu Initial settings for each input sourceInput source selected Multichannel Input SetupDigital Format Component Video Video Setup Sub-menuLast Valid enables the source last selected Select to have VideoCharacter Display IntelliVolume Sub-menuIntelliVolume Character Input Sub-menuType of software Listening Mode Preset Sub-menuRelationship between input source and listening mode Listening ModeListening Modes Input source signalsTrigger Setup Sub-menu Tone Control Sub-menu Audio AdjustAudio Adjust Setup Menu Setting Values Initial valueSound Effect Sub-menu Audio AdjustDelay Sub-menu Mono Sub-menu Theater Dimensional Sub-menuLFE Level Sub-menu Surround Sub-menu THX Sub-menu Re-EQ Setting Tone ControlListening mode Treble Sound Effect BassPreference Menu Volume Setup Sub-menuPreference OSD Position Sub-menu Headphones Level Setup Sub-menuOSD Setup Sub-menu PreferenceControlling an Integra/Onkyo cassette tape deck Using remote controllerRcvr Mode OverviewControlling an Integra/Onkyo DVD player Using remote controllerControlling an Integra/Onkyo CD player On Standby CD Mode DiscPress the CD Mode button Rec Record On Standby SAT/MD ModePress the SAT/MD Mode button Controlling an Integra/Onkyo MD recorderDisplay Entering a pre-programming codeLearning a pre-programming code VOLPre-programming codes Setting NoEntering a pre-programming code Cable Mode Cable Mode Operating your programmed remote controllerDVD Mode DVD Player Mode SAT Mode Satellite Tuner ModeTV Mode TV Mode Operating your programmed remote controllerVCR Mode VCR Mode Light Macro 1 Macro Programming procedurePress and release the same button again Erasing the programmed command from one buttonErasing all the commands programmed under a Mode button Press and release the same Mode button againExecuting the macro Using the macro functionWhat is the macro function? Programming the macroErasing a macro from the Macro 1 or 2 button Using the macro functionErasing all commands and macros that have been programmed Troubleshooting guide Video and Audio Troubleshooting guideIf one of the messages shown below appears Specifications Net-Tune Features Internet radio featuresModem To the WAN side To the LAN side port Connecting the DTR-7.3 to your Ethernet NetworkEnjoying Internet radio Enjoying Music on Internet Radio or NAS-2.3Playing a music file saved in NAS-2.3 Enjoying Music on Internet Radio or NAS-2.3Caps Press the Enter button Using the Alphanumeric keysTo cancel the operation Use the / buttons to select one of the menuNetwork Setup Menu Configuring Various SettingsMAC Address Sub-menu Configuring Various SettingsProxy Setup Sub-menu IP Address Sub-menuAppendix Troubleshooting guideSpecifications

DTR-7.3 specifications

The Integra DTR-7.3 is a state-of-the-art AV receiver designed for audiophiles and home theater enthusiasts who seek a blend of performance, flexibility, and advanced technology. With a powerful amplifier section, the DTR-7.3 delivers an exceptional audio experience, providing crystal-clear sound reproduction across all frequencies.

At the heart of the DTR-7.3 is the ability to deliver 9.2 channels of amplification, making it an ideal choice for a comprehensive home theater setup. It supports various speaker configurations, allowing users to create immersive surround sound environments. The receiver is equipped with sophisticated DSP (Digital Signal Processing) that enhances audio fidelity while supporting multiple audio formats, including Dolby Atmos, DTS:X, and IMAX Enhanced. These technologies enable sound to move in a three-dimensional space, wrapping listeners in a dynamic auditory experience.

One of the standout features of the DTR-7.3 is its 4K Ultra HD video capabilities, ensuring that users can enjoy high-quality imagery with up to 60 frames per second. The receiver is equipped with HDR (High Dynamic Range) support, allowing for deeper contrast and more vibrant colors. Additionally, it includes multiple HDMI inputs and outputs, making it easy to connect to various devices, including gaming consoles, Blu-ray players, and streaming devices.

Connectivity is also a strong suit of the DTR-7.3. It supports Wi-Fi, Bluetooth, and Ethernet, granting users the ability to stream music from a variety of online services without the hassle of physical connections. The receiver is compatible with various music streaming protocols such as AirPlay, Spotify Connect, and TIDAL, allowing for seamless access to a vast library of audio content.

The DTR-7.3 also includes an advanced room calibration system that optimizes sound according to the specific acoustics of the room. This feature automates the tuning process, ensuring that every listening position benefits from balanced sound.

In addition, the user-friendly interface and the Integra Remote App make it easy to operate, allowing users to control their home theater setup from their smartphones or tablets. With its impressive combination of features, advanced technologies, and easy connectivity, the Integra DTR-7.3 stands out as a top-tier choice for anyone looking to elevate their home entertainment experience.
Top Page Image Contents