Integra DTR-7.3 instruction manual Speaker Setup, Speaker Distance Sub-menu

Page 44

Speaker Setup

1-2. Speaker Distance Sub-menu

Use this sub-menu to enter the distance from each speaker to the normal listening position.

Notes:

•Speakers that you selected “No” or “None” for in the Speaker Config Sub-menu will not appear in this sub-menu.

•The difference between the distances of different speakers cannot be set to more than 20 feet (6 meters).

Advanced Menu

1.Speaker Setup

1-2.Speaker Distance

a.Unit

:feet

b.Front L/R

:12.0ft

c.Center

:12.0ft

d.Surr Right

: 7.0ft

e.Surr Back R : 7.0ft

f.Surr Back L : 7.0ft

g.Surr Left

: 7.0ft

h.Subwoofer

:12.0ft

Quit:SETUP

a. Unit

feet: Select if you will enter the distances in feet.

meters: Select if you will enter the distances in meters.

b. Front L/R

Set the distance from the front left and right speakers to your normal listening position. This can be set between 1 and 30 feet in 0.5-feet increments (between 0.3 and 9 meters in 0.15-meter increments).

Position the front left and right speakers so that they are the same distance from the listener. If they are not, you may lose the center orientation with stereo sound.

c. Center

Set the distance from the center speaker to your normal listening position. This can be set between 1 and 30 feet in 0.5-feet increments (between 0.3 and 9 meters in 0.15-meter increments).

d. Surr Right

Set the distance from the surround right speaker to your normal listening position. This can be set between 1 and 30 feet in 0.5-feet increments (between 0.3 and 9 meters in 0.15-meter increments).

e. Surr Back R

Set the distance from the surround back right speaker to your normal listening position. This can be set between 1 and 30 feet in 0.5-feet increments (between 0.3 and 9 meters in 0.15-meter increments).

f. Surr Back L

Set the distance from the surround back left speaker to your normal listening position. This can be set between 1 and 30 feet in 0.5-feet increments (between 0.3 and 9 meters in 0.15-meter increments).

Note:

If the Surr Back/Zone 2 setting in the Surr Back/Zone 2 Sub-menu of the Hardware Setup Menu is set to “Zone 2,” then the Surr Bk R and Surr Bk L settings will not be displayed.

g. Surr Left

Set the distance from the surround left speaker to your normal listening position. This can be set between 1 and 30 feet in 0.5-feet increments (between 0.3 and 9 meters in 0.15-meter increments).

h. Subwoofer

Set the distance from the subwoofer to your normal listening position. This can be set between 1 and 30 feet in 0.5-feet increments (between 0.3 and 9 meters in 0.15-meter increments).

44

Page 43 Page 45
Image 44
Page 43 Page 45
Contents DTR-7.3 Important Safeguards AvisPrecautions Contents Contents Features Supplied accessoriesUsing the remote controller Before using this unitInstalling the remote controller batteries Index parts and facilities Front panelIndex parts and facilities Front panel display Remote controller Send/Learn indicator Mode buttons and indicators 28On/Standby button Sleep buttonRear panel Connecting to Audio/Video equipment Connecting to Audio/Video equipment Connecting your audio componentsConnecting a compact disc player CD Connecting a turntable PhonoConnecting your video components Connecting a DVD PlayerFlow of the video signals is as follows Connecting a DVD player DVDConnecting a television monitor or projector Monitor OUT Connecting a video cassette recorder VideoSignal flow Connecting video camera, etc. Video 5 Input VideoConnecting speakers Ideal speaker configurationMinimum speaker configuration for surround sound playback Speaker placementUsing the speaker labels Connecting speakersConnecting speakers Connecting antennas Connecting the AM antenna cableConnecting the included antennas Assembling the AM loop antennaConnecting antennas Connecting the remote zone Zone 2 speakers When using the Surr BACK/ZONE 2 Speakers terminalsWhen using the Zone 2 OUT terminals When using the Surr BACK/ZONE 2 PRE OUT terminalsIR OUT Connections for remote control Connecting the power cords from other devicesMiscellaneous Connections RS 232 portConnecting to an external device with 12V Trigger terminal Connecting to devices with analog multi channel outputConnecting auxiliary power amplifier Miscellaneous ConnectionsTurning on the power from the remote controller Connecting the powerTurning on the power To change the display of the input source from Tape to MD Enjoying music or videos with the DTR-7.3Basic operation Adjusting the bass and treble Listening with headphonesUsing the sleep time remote controller only Enjoying music or videos with the DTR-7.3Changing the listening mode Setup Enter ReturnWhile playing back DTS sources While playing back Analog/PCM sourcesTemporarily changing the speaker output levels Switching the displayAdjusting the brightness of the front display Changing the audio mode Enjoying the multichannel outputListening to Radio Broadcasts Tuning into a radio stationListening to a stereo radio station FM mode Presetting a radio station Selecting a preset radio stationErasing a preset radio station Listening to Radio BroadcastsEnjoying music in the remote zone Using the buttons on the DTR-7.3Adjusting the volume for the remote zone Start recording at the recording component as desired Recording a sourceRec Out Recording a source Press the Rec Out buttonAdvanced Menu Setup MenuBasic Menu Press the Setup button Setup MenuNavigating through the Setup Menu Hardware Setup Hardware Setup MenuSurr Back/Zone 2 Sub-menu Speaker Impedance Sub-menuHardware Setup IR in Setup Sub-menuSpeaker Config Sub-menu Speaker SetupSpeaker Setup Menu Speaker Setup Speaker Distance Sub-menuUsing the remote controller Press the Test button Press the Test button to complete the procedureLevel Calibration Sub-menu Calibrating the speaker levelsInput Setup Input Setup MenuInitial settings for each input source Digital InputInput source selected Multichannel Input SetupDigital Format Video Setup Sub-menu Last Valid enables the source last selected Select to haveVideo Component VideoIntelliVolume Sub-menu IntelliVolumeCharacter Input Sub-menu Character DisplayListening Mode Preset Sub-menu Relationship between input source and listening modeListening Mode Type of softwareInput source signals Listening ModesTrigger Setup Sub-menu Audio Adjust Audio Adjust Setup MenuSetting Values Initial value Tone Control Sub-menuSound Effect Sub-menu Audio AdjustDelay Sub-menu Mono Sub-menu Theater Dimensional Sub-menuLFE Level Sub-menu Surround Sub-menu THX Sub-menu Setting Tone Control Listening mode TrebleSound Effect Bass Re-EQPreference Menu Volume Setup Sub-menuPreference Headphones Level Setup Sub-menu OSD Setup Sub-menuPreference OSD Position Sub-menuUsing remote controller Rcvr ModeOverview Controlling an Integra/Onkyo cassette tape deckUsing remote controller Controlling an Integra/Onkyo DVD playerControlling an Integra/Onkyo CD player On Standby CD Mode DiscPress the CD Mode button On Standby SAT/MD Mode Press the SAT/MD Mode buttonControlling an Integra/Onkyo MD recorder Rec RecordEntering a pre-programming code Learning a pre-programming codeVOL DisplayPre-programming codes Setting NoEntering a pre-programming code Operating your programmed remote controller DVD Mode DVD Player ModeSAT Mode Satellite Tuner Mode Cable Mode Cable ModeTV Mode TV Mode Operating your programmed remote controllerVCR Mode VCR Mode Programming procedure Light Macro 1 MacroErasing the programmed command from one button Erasing all the commands programmed under a Mode buttonPress and release the same Mode button again Press and release the same button againUsing the macro function What is the macro function?Programming the macro Executing the macroErasing a macro from the Macro 1 or 2 button Using the macro functionErasing all commands and macros that have been programmed Troubleshooting guide Troubleshooting guide Video and AudioIf one of the messages shown below appears Specifications Internet radio features Net-Tune FeaturesConnecting the DTR-7.3 to your Ethernet Network Modem To the WAN side To the LAN side portEnjoying Music on Internet Radio or NAS-2.3 Enjoying Internet radioEnjoying Music on Internet Radio or NAS-2.3 Playing a music file saved in NAS-2.3Using the Alphanumeric keys To cancel the operationUse the / buttons to select one of the menu Caps Press the Enter buttonConfiguring Various Settings Network Setup MenuConfiguring Various Settings Proxy Setup Sub-menuIP Address Sub-menu MAC Address Sub-menuAppendix Troubleshooting guideSpecifications

DTR-7.3 specifications

The Integra DTR-7.3 is a state-of-the-art AV receiver designed for audiophiles and home theater enthusiasts who seek a blend of performance, flexibility, and advanced technology. With a powerful amplifier section, the DTR-7.3 delivers an exceptional audio experience, providing crystal-clear sound reproduction across all frequencies.

At the heart of the DTR-7.3 is the ability to deliver 9.2 channels of amplification, making it an ideal choice for a comprehensive home theater setup. It supports various speaker configurations, allowing users to create immersive surround sound environments. The receiver is equipped with sophisticated DSP (Digital Signal Processing) that enhances audio fidelity while supporting multiple audio formats, including Dolby Atmos, DTS:X, and IMAX Enhanced. These technologies enable sound to move in a three-dimensional space, wrapping listeners in a dynamic auditory experience.

One of the standout features of the DTR-7.3 is its 4K Ultra HD video capabilities, ensuring that users can enjoy high-quality imagery with up to 60 frames per second. The receiver is equipped with HDR (High Dynamic Range) support, allowing for deeper contrast and more vibrant colors. Additionally, it includes multiple HDMI inputs and outputs, making it easy to connect to various devices, including gaming consoles, Blu-ray players, and streaming devices.

Connectivity is also a strong suit of the DTR-7.3. It supports Wi-Fi, Bluetooth, and Ethernet, granting users the ability to stream music from a variety of online services without the hassle of physical connections. The receiver is compatible with various music streaming protocols such as AirPlay, Spotify Connect, and TIDAL, allowing for seamless access to a vast library of audio content.

The DTR-7.3 also includes an advanced room calibration system that optimizes sound according to the specific acoustics of the room. This feature automates the tuning process, ensuring that every listening position benefits from balanced sound.

In addition, the user-friendly interface and the Integra Remote App make it easy to operate, allowing users to control their home theater setup from their smartphones or tablets. With its impressive combination of features, advanced technologies, and easy connectivity, the Integra DTR-7.3 stands out as a top-tier choice for anyone looking to elevate their home entertainment experience.
Top Page Image Contents