Integra DTR-7.3 instruction manual Troubleshooting guide, Video and Audio

Page 74

Troubleshooting guide

VIDEO and AUDIO

Desired picture does not appear.

•Improper connection.

➞Check connections. Insert the plugs and connectors completely (see pages 16, 19).

•Video Setup Sub-menu settings are incorrect.

➞Check settings at Setup Menu → Input Setup Menu → Video Setup Sub-menu (see page 48).

No OSD Menu display.

•Improper connection.

➞Check connections (see pages 17).

•OSD Menu is displayed when monitor is connected to VIDEO or S VIDEO of MONITOR OUT.

➞Check connections (see page 17).

Audio and video do not match.

•Improper connection.

➞Check connections (see page 16, 19).

•Video Setup Sub-menu settings are incorrect.

➞Check settings at Setup Menu → Input Setup Menu → Video Setup Sub-menu (see page 48).

Audio is not heard or audio from different source is heard.

•Digital Setup Sub-menu settings are incorrect.

➞Check settings at Setup Menu → Input Setup Menu → Digital Setup Sub-menu (see page 46).

No picture appears on the TV screen (or monitor).

•TV (or monitor) is not set to receive the output signals from the receiver.

➞Set the TV (or monitor) to the receiver input.

•Video cable is not connected securely.

➞Check connections (see pages 16, 19).

•Input source is connected to the COMPONENT VIDEO IN connectors.

➞Make sure TV (or monitor) is connected to COMPONENT VIDEO OUT connectors (see page 17).

REMOTE CONTROLLER

Front panel controls function but remote controller controls do not.

•No batteries in remote controller.

➞Insert batteries (see page 7).

•Batteries have worn out.

➞Replace batteries (see page 7).

•Remote controller is not pointed at the remote sensor of the DTR-7.3.

➞Point the remote controller at the remote sensor of the DTR- 7.3 (see page 7).

•Remote controller is too far from the DTR-7.3.

➞Operate the remote controller within 16 feet (5 meters) (see page 7).

•Remote controller is functioning in a different mode

➞Press the RCVR Mode button.

OTHER

LATE NIGHT function cannot be used.

•Playback source is not Dolby Digital encoded.

➞Check that the DOLBY DIGITAL indicator lights up on the display.

Re-EQ function cannot be used.

•Listening mode is set to Theater-Dimensional, THX, or Direct/ Pure Audio.

➞ Select different listening mode (see page 58).

Desired parameter cannot be set.

•Parameter may not be able to be set due to current listening mode.

➞ Check settings in Audio Adjust Menu (see page 58).

Multichannel audio is not output.

•The Multichannel setting is set to “No.”

➞Set the Multichannel setting to “Yes” at Setup Menu → Input Setup Menu → Multichannel Setup Sub-menu (see page 47).

•Input source is not connected to MULTI CHANNEL INPUT port.

➞Check connections (see page 27).

Components in remote zone (Zone 2) do not operate properly.

•Components are incorrectly connected.

➞Check connections.

•Objects are interfering with remote controller signals.

➞Move inferring objects away from path of remote controller signals.

Sound is sometimes heard and sometimes not heard with digital sources.

•One digital input format has been specified so other digital formats are not played.

➞Select “All” at Setup Menu → Input Setup Menu → Digital Setup Sub-menu → Digital Format (see page 47).

Noise during playback or skipping of the beginning sounds occurs with DTS sources, PCM sources, and other digital sources.

•When “All” is set for the digital format setting, time is required to change formats when different sources are played.

➞Try specifying the format you are playing at Setup Menu → Input Setup Menu → Digital Setup Sub-menu → Digital Format (see page 47).

The unit cannot be switched to Dolby EX or DTS-ES mode.

•“Surr Back/Zone 2” is set to “Zone 2.”

➞Change the “0. Hardware Setup → 0-2. Surr Back/Zone 2 Sub-menu” setting to “Surr Back.” (See page 41)

•The “Surr Back” setting is set to “None.”

➞Set the “Surr Back” setting to “Large” or “Small” at Setup Menu → “1. Speaker Setup Menu” → “1-1. Speaker Config Sub-menu” (see page 43).

74

Page 73 Page 75
Image 74
Page 73 Page 75
Contents DTR-7.3 Important Safeguards AvisPrecautions Contents Contents Features Supplied accessoriesUsing the remote controller Before using this unitInstalling the remote controller batteries Index parts and facilities Front panelIndex parts and facilities Front panel display Remote controller On/Standby button Send/Learn indicatorMode buttons and indicators 28 Sleep buttonRear panel Connecting to Audio/Video equipment Connecting a compact disc player CD Connecting to Audio/Video equipmentConnecting your audio components Connecting a turntable PhonoFlow of the video signals is as follows Connecting your video componentsConnecting a DVD Player Connecting a DVD player DVDConnecting a television monitor or projector Monitor OUT Connecting a video cassette recorder VideoSignal flow Connecting video camera, etc. Video 5 Input VideoMinimum speaker configuration for surround sound playback Connecting speakersIdeal speaker configuration Speaker placementUsing the speaker labels Connecting speakersConnecting speakers Connecting the included antennas Connecting antennasConnecting the AM antenna cable Assembling the AM loop antennaConnecting antennas When using the Zone 2 OUT terminals Connecting the remote zone Zone 2 speakersWhen using the Surr BACK/ZONE 2 Speakers terminals When using the Surr BACK/ZONE 2 PRE OUT terminalsIR OUT Miscellaneous Connections Connections for remote controlConnecting the power cords from other devices RS 232 portConnecting auxiliary power amplifier Connecting to an external device with 12V Trigger terminalConnecting to devices with analog multi channel output Miscellaneous ConnectionsTurning on the power from the remote controller Connecting the powerTurning on the power To change the display of the input source from Tape to MD Enjoying music or videos with the DTR-7.3Basic operation Using the sleep time remote controller only Adjusting the bass and trebleListening with headphones Enjoying music or videos with the DTR-7.3While playing back DTS sources Changing the listening modeSetup Enter Return While playing back Analog/PCM sourcesTemporarily changing the speaker output levels Switching the displayAdjusting the brightness of the front display Changing the audio mode Enjoying the multichannel outputListening to Radio Broadcasts Tuning into a radio stationListening to a stereo radio station FM mode Erasing a preset radio station Presetting a radio stationSelecting a preset radio station Listening to Radio BroadcastsEnjoying music in the remote zone Using the buttons on the DTR-7.3Adjusting the volume for the remote zone Start recording at the recording component as desired Recording a sourceRec Out Recording a source Press the Rec Out buttonAdvanced Menu Setup MenuBasic Menu Press the Setup button Setup MenuNavigating through the Setup Menu Surr Back/Zone 2 Sub-menu Hardware SetupHardware Setup Menu Speaker Impedance Sub-menuHardware Setup IR in Setup Sub-menuSpeaker Config Sub-menu Speaker SetupSpeaker Setup Menu Speaker Setup Speaker Distance Sub-menuLevel Calibration Sub-menu Using the remote controller Press the Test buttonPress the Test button to complete the procedure Calibrating the speaker levelsInitial settings for each input source Input SetupInput Setup Menu Digital InputInput source selected Multichannel Input SetupDigital Format Video Video Setup Sub-menuLast Valid enables the source last selected Select to have Component VideoCharacter Input Sub-menu IntelliVolume Sub-menuIntelliVolume Character DisplayListening Mode Listening Mode Preset Sub-menuRelationship between input source and listening mode Type of softwareInput source signals Listening ModesTrigger Setup Sub-menu Setting Values Initial value Audio AdjustAudio Adjust Setup Menu Tone Control Sub-menuSound Effect Sub-menu Audio AdjustDelay Sub-menu Mono Sub-menu Theater Dimensional Sub-menuLFE Level Sub-menu Surround Sub-menu THX Sub-menu Sound Effect Bass Setting Tone ControlListening mode Treble Re-EQPreference Menu Volume Setup Sub-menuPreference Preference Headphones Level Setup Sub-menuOSD Setup Sub-menu OSD Position Sub-menuOverview Using remote controllerRcvr Mode Controlling an Integra/Onkyo cassette tape deckUsing remote controller Controlling an Integra/Onkyo DVD playerControlling an Integra/Onkyo CD player On Standby CD Mode DiscPress the CD Mode button Controlling an Integra/Onkyo MD recorder On Standby SAT/MD ModePress the SAT/MD Mode button Rec RecordVOL Entering a pre-programming codeLearning a pre-programming code DisplayPre-programming codes Setting NoEntering a pre-programming code SAT Mode Satellite Tuner Mode Operating your programmed remote controllerDVD Mode DVD Player Mode Cable Mode Cable ModeTV Mode TV Mode Operating your programmed remote controllerVCR Mode VCR Mode Programming procedure Light Macro 1 MacroPress and release the same Mode button again Erasing the programmed command from one buttonErasing all the commands programmed under a Mode button Press and release the same button againProgramming the macro Using the macro functionWhat is the macro function? Executing the macroErasing a macro from the Macro 1 or 2 button Using the macro functionErasing all commands and macros that have been programmed Troubleshooting guide Troubleshooting guide Video and AudioIf one of the messages shown below appears Specifications Internet radio features Net-Tune FeaturesConnecting the DTR-7.3 to your Ethernet Network Modem To the WAN side To the LAN side portEnjoying Music on Internet Radio or NAS-2.3 Enjoying Internet radioEnjoying Music on Internet Radio or NAS-2.3 Playing a music file saved in NAS-2.3Use the / buttons to select one of the menu Using the Alphanumeric keysTo cancel the operation Caps Press the Enter buttonConfiguring Various Settings Network Setup MenuIP Address Sub-menu Configuring Various SettingsProxy Setup Sub-menu MAC Address Sub-menuAppendix Troubleshooting guideSpecifications

DTR-7.3 specifications

The Integra DTR-7.3 is a state-of-the-art AV receiver designed for audiophiles and home theater enthusiasts who seek a blend of performance, flexibility, and advanced technology. With a powerful amplifier section, the DTR-7.3 delivers an exceptional audio experience, providing crystal-clear sound reproduction across all frequencies.

At the heart of the DTR-7.3 is the ability to deliver 9.2 channels of amplification, making it an ideal choice for a comprehensive home theater setup. It supports various speaker configurations, allowing users to create immersive surround sound environments. The receiver is equipped with sophisticated DSP (Digital Signal Processing) that enhances audio fidelity while supporting multiple audio formats, including Dolby Atmos, DTS:X, and IMAX Enhanced. These technologies enable sound to move in a three-dimensional space, wrapping listeners in a dynamic auditory experience.

One of the standout features of the DTR-7.3 is its 4K Ultra HD video capabilities, ensuring that users can enjoy high-quality imagery with up to 60 frames per second. The receiver is equipped with HDR (High Dynamic Range) support, allowing for deeper contrast and more vibrant colors. Additionally, it includes multiple HDMI inputs and outputs, making it easy to connect to various devices, including gaming consoles, Blu-ray players, and streaming devices.

Connectivity is also a strong suit of the DTR-7.3. It supports Wi-Fi, Bluetooth, and Ethernet, granting users the ability to stream music from a variety of online services without the hassle of physical connections. The receiver is compatible with various music streaming protocols such as AirPlay, Spotify Connect, and TIDAL, allowing for seamless access to a vast library of audio content.

The DTR-7.3 also includes an advanced room calibration system that optimizes sound according to the specific acoustics of the room. This feature automates the tuning process, ensuring that every listening position benefits from balanced sound.

In addition, the user-friendly interface and the Integra Remote App make it easy to operate, allowing users to control their home theater setup from their smartphones or tablets. With its impressive combination of features, advanced technologies, and easy connectivity, the Integra DTR-7.3 stands out as a top-tier choice for anyone looking to elevate their home entertainment experience.
Top Page Image Contents