Integra DTR-7.3 instruction manual Configuring Various Settings, Network Setup Menu

Page 82

Configuring Various Settings

Navigating through the Setup Menu:

Be sure to press the RCVR button before using the remote controller.

1.

Press the Setup button.

 

2.

Using the

and cursor buttons, select the menu

 

that you want to enter.

 

3.

Press the Enter button to enter the selected menu.

4.

Use the

and cursor buttons to select the sub-menu

 

that you want to enter and press the Enter button.

 

Each sub-menu has different settings that can be changed as desired,

 

and they are all explained in the pages that follow. To change a

 

setting, first select it using the

and cursor buttons, and then

 

change the setting using the and

cursor buttons.

Network Setup Menu

Before you can use the DTR-7.3 to play music contained in the music library in the NAS-2.3 and listen to Internet radio, you must correctly configure the DTR-7.3’s network settings so that it can connect to your LAN and the Internet.

It is strongly recommended to use a broadband connection (via an xDSL or CATV leased line) and a router. If you are connected to the Internet via a narrowband dialup connection, you may not be able to enjoy Internet radio as you expect or at all.

Before setting up the DTR-7.3, make sure that you are already using a router that provides Internet access and that the DTR-7.3 is correctly connected with your router or hub via a LAN cable.

For more information on Internet connectivity, consult with your ISP (Internet Service Provider) or refer to the documentation of your router.

5. Press the Return button to set the new settings and

return to the previous menu screen.

Press the RETURN button again to return to the main menu.

Input Setup Menu (When NET AUDIO is selected as the input source)

When NET AUDIO is selected as the input source, you can set up Music Server on this screen.

2-1.Music Server

2-2.Playback OSD Display

Input:NET A

Input:NET A

a.Select Server

a.Playback OSD Display

:NAS-2.3

:Full

→OK

 

Quit:SETUP

Quit:SETUP

2-1. Music Server Sub-menu

a. Select Server

Select the NAS-2.3 that exists on the network.

*mark appears to the servers detected on the network. If there is a server

which does not have * mark, make sure that the server is started.

After selection, use the button to select “→ OK”, and press the Enter button to confirm your selection.

2-2. Playback OSD Display Sub-menu

a. Playback OSD Display

Advanced Menu

5.Network Setup

5-1.IP Address

 

 

 

1.Speaker Config

 

 

 

2a..SpeakerDHCP/AUTODistance-IP

:On

 

3b..LevelIPAddressCalibration

 

4.Bass:192Peak.168Level.9. 62

c.SUBNET Mask

 

 

 

:255.255.255.

0

d.Gateway

 

 

 

:192.168.

9.

1

DNS ServerENTER Quit:OSD

e.1st:210.134.143.

7

f.2nd:125. 40.104.

0

Advanced Menu

5.Network Setup

1.IP Address 2.Proxy Setup 3.MAC Address 4.Client Setup

→Save settings

ENTERQuit:SETUP

Advanced Menu

5.Network Setup

5-4.Client Setup

1.Speaker Config

2

.Speaker.ClientDistanceName

3.Level:TX-CalibrationNR9000102

4b..BassWakeupPeakonLevelLAN

:On

uit:Oc.NTSPDPort

:XXXXXX

Quit:SETUP

Advanced Menu

5.Network Setup

5-2.Proxy Setup 1.Speaker Config 2.Speaker Distance

3a..LevelProxyCalibrationServer 4.Bass Peak Level :On b.Proxy Address

c.Proxy Port

: 8080

ENTER Quit:OSD

Quit:SETUP

Advanced Menu

5.Network Setup

5-3.MAC Address

1.Speaker Config

2

.Speaker.MACAddressDistance

3.Level:XX:XX:XX:XX:XX:XXCalibration

4.Bass Peak Level

Quit:OSD

Quit:SETUP

Full: Select this when you want to have the OSD display the information on the currently played track.

Simple: Displays the current track information summary in two lines.

Off: Select this when you do not want to have the information displayed on the OSD.

DHCP (Dynamic Host Configuration Protocol) and AutoIP are mechanisms for network configuration, which assign IP addresses automatically to the network devices such as the DTR-7.3, PC, and broadband router.

DNS (Domain Name System) is a mechanism which translates domain names into IP addresses or vice versa. Domain names such as www.onkyo.co.jp are used for Web browsing, and IP addresses such as 210.199.170.69 are used for actual network data transfer.

6

Page 81 Page 83
Image 82
Page 81 Page 83
Contents DTR-7.3 Important Safeguards AvisPrecautions Contents Contents Features Supplied accessoriesInstalling the remote controller batteries Before using this unitUsing the remote controller Index parts and facilities Front panelIndex parts and facilities Front panel display Remote controller On/Standby button Send/Learn indicatorMode buttons and indicators 28 Sleep buttonRear panel Connecting to Audio/Video equipment Connecting a compact disc player CD Connecting to Audio/Video equipmentConnecting your audio components Connecting a turntable PhonoFlow of the video signals is as follows Connecting your video componentsConnecting a DVD Player Connecting a DVD player DVDConnecting a television monitor or projector Monitor OUT Connecting a video cassette recorder VideoSignal flow Connecting video camera, etc. Video 5 Input VideoMinimum speaker configuration for surround sound playback Connecting speakersIdeal speaker configuration Speaker placementConnecting speakers Connecting speakersUsing the speaker labels Connecting the included antennas Connecting antennasConnecting the AM antenna cable Assembling the AM loop antennaConnecting antennas When using the Zone 2 OUT terminals Connecting the remote zone Zone 2 speakersWhen using the Surr BACK/ZONE 2 Speakers terminals When using the Surr BACK/ZONE 2 PRE OUT terminalsIR OUT Miscellaneous Connections Connections for remote controlConnecting the power cords from other devices RS 232 portConnecting auxiliary power amplifier Connecting to an external device with 12V Trigger terminalConnecting to devices with analog multi channel output Miscellaneous ConnectionsTurning on the power Connecting the powerTurning on the power from the remote controller Basic operation Enjoying music or videos with the DTR-7.3To change the display of the input source from Tape to MD Using the sleep time remote controller only Adjusting the bass and trebleListening with headphones Enjoying music or videos with the DTR-7.3While playing back DTS sources Changing the listening modeSetup Enter Return While playing back Analog/PCM sourcesAdjusting the brightness of the front display Switching the displayTemporarily changing the speaker output levels Changing the audio mode Enjoying the multichannel outputListening to a stereo radio station FM mode Tuning into a radio stationListening to Radio Broadcasts Erasing a preset radio station Presetting a radio stationSelecting a preset radio station Listening to Radio BroadcastsAdjusting the volume for the remote zone Using the buttons on the DTR-7.3Enjoying music in the remote zone Rec Out Recording a sourceStart recording at the recording component as desired Recording a source Press the Rec Out buttonBasic Menu Setup MenuAdvanced Menu Navigating through the Setup Menu Setup MenuPress the Setup button Surr Back/Zone 2 Sub-menu Hardware SetupHardware Setup Menu Speaker Impedance Sub-menuHardware Setup IR in Setup Sub-menuSpeaker Setup Menu Speaker SetupSpeaker Config Sub-menu Speaker Setup Speaker Distance Sub-menuLevel Calibration Sub-menu Using the remote controller Press the Test buttonPress the Test button to complete the procedure Calibrating the speaker levelsInitial settings for each input source Input SetupInput Setup Menu Digital InputDigital Format Input SetupInput source selected Multichannel Video Video Setup Sub-menuLast Valid enables the source last selected Select to have Component VideoCharacter Input Sub-menu IntelliVolume Sub-menuIntelliVolume Character DisplayListening Mode Listening Mode Preset Sub-menuRelationship between input source and listening mode Type of softwareInput source signals Listening ModesTrigger Setup Sub-menu Setting Values Initial value Audio AdjustAudio Adjust Setup Menu Tone Control Sub-menuDelay Sub-menu Audio AdjustSound Effect Sub-menu LFE Level Sub-menu Theater Dimensional Sub-menuMono Sub-menu Surround Sub-menu THX Sub-menu Sound Effect Bass Setting Tone ControlListening mode Treble Re-EQPreference Volume Setup Sub-menuPreference Menu Preference Headphones Level Setup Sub-menuOSD Setup Sub-menu OSD Position Sub-menuOverview Using remote controllerRcvr Mode Controlling an Integra/Onkyo cassette tape deckUsing remote controller Controlling an Integra/Onkyo DVD playerPress the CD Mode button On Standby CD Mode DiscControlling an Integra/Onkyo CD player Controlling an Integra/Onkyo MD recorder On Standby SAT/MD ModePress the SAT/MD Mode button Rec RecordVOL Entering a pre-programming codeLearning a pre-programming code DisplayEntering a pre-programming code Setting NoPre-programming codes SAT Mode Satellite Tuner Mode Operating your programmed remote controllerDVD Mode DVD Player Mode Cable Mode Cable ModeVCR Mode VCR Mode Operating your programmed remote controllerTV Mode TV Mode Programming procedure Light Macro 1 MacroPress and release the same Mode button again Erasing the programmed command from one buttonErasing all the commands programmed under a Mode button Press and release the same button againProgramming the macro Using the macro functionWhat is the macro function? Executing the macroErasing all commands and macros that have been programmed Using the macro functionErasing a macro from the Macro 1 or 2 button Troubleshooting guide Troubleshooting guide Video and AudioIf one of the messages shown below appears Specifications Internet radio features Net-Tune FeaturesConnecting the DTR-7.3 to your Ethernet Network Modem To the WAN side To the LAN side portEnjoying Music on Internet Radio or NAS-2.3 Enjoying Internet radioEnjoying Music on Internet Radio or NAS-2.3 Playing a music file saved in NAS-2.3Use the / buttons to select one of the menu Using the Alphanumeric keysTo cancel the operation Caps Press the Enter buttonConfiguring Various Settings Network Setup MenuIP Address Sub-menu Configuring Various SettingsProxy Setup Sub-menu MAC Address Sub-menuSpecifications Troubleshooting guideAppendix

DTR-7.3 specifications

The Integra DTR-7.3 is a state-of-the-art AV receiver designed for audiophiles and home theater enthusiasts who seek a blend of performance, flexibility, and advanced technology. With a powerful amplifier section, the DTR-7.3 delivers an exceptional audio experience, providing crystal-clear sound reproduction across all frequencies.

At the heart of the DTR-7.3 is the ability to deliver 9.2 channels of amplification, making it an ideal choice for a comprehensive home theater setup. It supports various speaker configurations, allowing users to create immersive surround sound environments. The receiver is equipped with sophisticated DSP (Digital Signal Processing) that enhances audio fidelity while supporting multiple audio formats, including Dolby Atmos, DTS:X, and IMAX Enhanced. These technologies enable sound to move in a three-dimensional space, wrapping listeners in a dynamic auditory experience.

One of the standout features of the DTR-7.3 is its 4K Ultra HD video capabilities, ensuring that users can enjoy high-quality imagery with up to 60 frames per second. The receiver is equipped with HDR (High Dynamic Range) support, allowing for deeper contrast and more vibrant colors. Additionally, it includes multiple HDMI inputs and outputs, making it easy to connect to various devices, including gaming consoles, Blu-ray players, and streaming devices.

Connectivity is also a strong suit of the DTR-7.3. It supports Wi-Fi, Bluetooth, and Ethernet, granting users the ability to stream music from a variety of online services without the hassle of physical connections. The receiver is compatible with various music streaming protocols such as AirPlay, Spotify Connect, and TIDAL, allowing for seamless access to a vast library of audio content.

The DTR-7.3 also includes an advanced room calibration system that optimizes sound according to the specific acoustics of the room. This feature automates the tuning process, ensuring that every listening position benefits from balanced sound.

In addition, the user-friendly interface and the Integra Remote App make it easy to operate, allowing users to control their home theater setup from their smartphones or tablets. With its impressive combination of features, advanced technologies, and easy connectivity, the Integra DTR-7.3 stands out as a top-tier choice for anyone looking to elevate their home entertainment experience.
Top Page Image Contents