Integra DTR-7.3 instruction manual Index parts and facilities, Front panel

Page 8

Index parts and facilities

Front panel

For further operational instructions, see the pages indicated in brackets [ ].

Standby/On button [28]

If pressed with the receiver plugged in, the DTR-7.3 turns on and the display lights up. If pressed again, the DTR-7.3 returns to the standby state. In the standby state, the display is turned off and the DTR-7.3 cannot be operated.

Standby indicator [7, 28]

Lights when the DTR-7.3 is in the standby state and when a signal is received from the remote controller.

Audio Selector button [33]

Press to select the type of audio input signal.

Remote control sensor [7]

Display button [32]

Press to display information about the current input source signal. Each time you press the display button, the screen changes to show you different information concerning the input signal.

Dimmer button [32]

Press to set the brightness of the front display. There are three settings available: normal, dark, and very dark.

•The brightness of the front display can also be performed using the remote controller.

Listening mode buttons [31, 51]

Press these buttons to select a listening mode for the current input source.

Direct/Pure Audio: Press to switch between the direct and pure audio listening modes.

Stereo: Selects for the stereo listening mode.

Surround: Selects for the Dolby Pro LogicII, DTS Neo:6, Dolby Digital, or DTS listening modes.

THX: Selects for the THX listening mode.

DSP /: Switches to the DSP mode.

Front display

Memory button [35]

Press to assign the radio station that you are currently tuned into to a preset channel or press to delete a previously preset station.

FM Mode button [34]

Press to change the stereo mode from AUTO to MONO and vice versa. Each time this button is pressed, the AUTO indication turns on and off indicating the current mode. If you are listening to an FM radio station in stereo and the sound cuts out or there is a great deal of noise, switch from AUTO to MONO.

Tuning /, Preset /, cursor buttons [34, 35, 40]

To tune into a radio station, press the Tuning / buttons. The tuner frequency is displayed in the front display and it can be changed in 100-kHz (or 50-kHz) increments for FM and 10-kHz (or 9-kHz) increments for AM.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents DTR-7.3 Important Safeguards AvisPrecautions Contents Contents Features Supplied accessoriesUsing the remote controller Before using this unitInstalling the remote controller batteries Index parts and facilities Front panelIndex parts and facilities Front panel display Remote controller Send/Learn indicator Mode buttons and indicators 28On/Standby button Sleep buttonRear panel Connecting to Audio/Video equipment Connecting to Audio/Video equipment Connecting your audio componentsConnecting a compact disc player CD Connecting a turntable PhonoConnecting your video components Connecting a DVD PlayerFlow of the video signals is as follows Connecting a DVD player DVDConnecting a television monitor or projector Monitor OUT Connecting a video cassette recorder VideoSignal flow Connecting video camera, etc. Video 5 Input VideoConnecting speakers Ideal speaker configurationMinimum speaker configuration for surround sound playback Speaker placementUsing the speaker labels Connecting speakersConnecting speakers Connecting antennas Connecting the AM antenna cableConnecting the included antennas Assembling the AM loop antennaConnecting antennas Connecting the remote zone Zone 2 speakers When using the Surr BACK/ZONE 2 Speakers terminalsWhen using the Zone 2 OUT terminals When using the Surr BACK/ZONE 2 PRE OUT terminalsIR OUT Connections for remote control Connecting the power cords from other devicesMiscellaneous Connections RS 232 portConnecting to an external device with 12V Trigger terminal Connecting to devices with analog multi channel outputConnecting auxiliary power amplifier Miscellaneous ConnectionsTurning on the power from the remote controller Connecting the powerTurning on the power To change the display of the input source from Tape to MD Enjoying music or videos with the DTR-7.3Basic operation Adjusting the bass and treble Listening with headphonesUsing the sleep time remote controller only Enjoying music or videos with the DTR-7.3Changing the listening mode Setup Enter ReturnWhile playing back DTS sources While playing back Analog/PCM sourcesTemporarily changing the speaker output levels Switching the displayAdjusting the brightness of the front display Changing the audio mode Enjoying the multichannel outputListening to Radio Broadcasts Tuning into a radio stationListening to a stereo radio station FM mode Presetting a radio station Selecting a preset radio stationErasing a preset radio station Listening to Radio BroadcastsEnjoying music in the remote zone Using the buttons on the DTR-7.3Adjusting the volume for the remote zone Start recording at the recording component as desired Recording a sourceRec Out Recording a source Press the Rec Out buttonAdvanced Menu Setup MenuBasic Menu Press the Setup button Setup MenuNavigating through the Setup Menu Hardware Setup Hardware Setup MenuSurr Back/Zone 2 Sub-menu Speaker Impedance Sub-menuHardware Setup IR in Setup Sub-menuSpeaker Config Sub-menu Speaker SetupSpeaker Setup Menu Speaker Setup Speaker Distance Sub-menuUsing the remote controller Press the Test button Press the Test button to complete the procedureLevel Calibration Sub-menu Calibrating the speaker levelsInput Setup Input Setup MenuInitial settings for each input source Digital InputInput source selected Multichannel Input SetupDigital Format Video Setup Sub-menu Last Valid enables the source last selected Select to haveVideo Component VideoIntelliVolume Sub-menu IntelliVolumeCharacter Input Sub-menu Character DisplayListening Mode Preset Sub-menu Relationship between input source and listening modeListening Mode Type of softwareInput source signals Listening ModesTrigger Setup Sub-menu Audio Adjust Audio Adjust Setup MenuSetting Values Initial value Tone Control Sub-menuSound Effect Sub-menu Audio AdjustDelay Sub-menu Mono Sub-menu Theater Dimensional Sub-menuLFE Level Sub-menu Surround Sub-menu THX Sub-menu Setting Tone Control Listening mode TrebleSound Effect Bass Re-EQPreference Menu Volume Setup Sub-menuPreference Headphones Level Setup Sub-menu OSD Setup Sub-menuPreference OSD Position Sub-menuUsing remote controller Rcvr ModeOverview Controlling an Integra/Onkyo cassette tape deckUsing remote controller Controlling an Integra/Onkyo DVD playerControlling an Integra/Onkyo CD player On Standby CD Mode DiscPress the CD Mode button On Standby SAT/MD Mode Press the SAT/MD Mode buttonControlling an Integra/Onkyo MD recorder Rec RecordEntering a pre-programming code Learning a pre-programming codeVOL DisplayPre-programming codes Setting NoEntering a pre-programming code Operating your programmed remote controller DVD Mode DVD Player ModeSAT Mode Satellite Tuner Mode Cable Mode Cable ModeTV Mode TV Mode Operating your programmed remote controllerVCR Mode VCR Mode Programming procedure Light Macro 1 MacroErasing the programmed command from one button Erasing all the commands programmed under a Mode buttonPress and release the same Mode button again Press and release the same button againUsing the macro function What is the macro function?Programming the macro Executing the macroErasing a macro from the Macro 1 or 2 button Using the macro functionErasing all commands and macros that have been programmed Troubleshooting guide Troubleshooting guide Video and AudioIf one of the messages shown below appears Specifications Internet radio features Net-Tune FeaturesConnecting the DTR-7.3 to your Ethernet Network Modem To the WAN side To the LAN side portEnjoying Music on Internet Radio or NAS-2.3 Enjoying Internet radioEnjoying Music on Internet Radio or NAS-2.3 Playing a music file saved in NAS-2.3Using the Alphanumeric keys To cancel the operationUse the / buttons to select one of the menu Caps Press the Enter buttonConfiguring Various Settings Network Setup MenuConfiguring Various Settings Proxy Setup Sub-menuIP Address Sub-menu MAC Address Sub-menuAppendix Troubleshooting guideSpecifications

DTR-7.3 specifications

The Integra DTR-7.3 is a state-of-the-art AV receiver designed for audiophiles and home theater enthusiasts who seek a blend of performance, flexibility, and advanced technology. With a powerful amplifier section, the DTR-7.3 delivers an exceptional audio experience, providing crystal-clear sound reproduction across all frequencies.

At the heart of the DTR-7.3 is the ability to deliver 9.2 channels of amplification, making it an ideal choice for a comprehensive home theater setup. It supports various speaker configurations, allowing users to create immersive surround sound environments. The receiver is equipped with sophisticated DSP (Digital Signal Processing) that enhances audio fidelity while supporting multiple audio formats, including Dolby Atmos, DTS:X, and IMAX Enhanced. These technologies enable sound to move in a three-dimensional space, wrapping listeners in a dynamic auditory experience.

One of the standout features of the DTR-7.3 is its 4K Ultra HD video capabilities, ensuring that users can enjoy high-quality imagery with up to 60 frames per second. The receiver is equipped with HDR (High Dynamic Range) support, allowing for deeper contrast and more vibrant colors. Additionally, it includes multiple HDMI inputs and outputs, making it easy to connect to various devices, including gaming consoles, Blu-ray players, and streaming devices.

Connectivity is also a strong suit of the DTR-7.3. It supports Wi-Fi, Bluetooth, and Ethernet, granting users the ability to stream music from a variety of online services without the hassle of physical connections. The receiver is compatible with various music streaming protocols such as AirPlay, Spotify Connect, and TIDAL, allowing for seamless access to a vast library of audio content.

The DTR-7.3 also includes an advanced room calibration system that optimizes sound according to the specific acoustics of the room. This feature automates the tuning process, ensuring that every listening position benefits from balanced sound.

In addition, the user-friendly interface and the Integra Remote App make it easy to operate, allowing users to control their home theater setup from their smartphones or tablets. With its impressive combination of features, advanced technologies, and easy connectivity, the Integra DTR-7.3 stands out as a top-tier choice for anyone looking to elevate their home entertainment experience.
Top Page Image Contents