Integra DTR-7.3 Input Setup Menu, Initial settings for each input source, Digital Input

Page 46

Input Setup

2. Input Setup Menu

This menu allows you to make the various settings concerning the signals input from the various input sources that you use with the DTR-7.3. The settings made in this menu are valid for the input source that is currently selected with the input source buttons at the front panel and, therefore, these settings are made separately for each input source. Each input source may have a great number of settings that are difficult to keep track of, so we recommend making a chart to record what you have set and for which component to prevent confusion later.

When Net Audio is not selected as the input source

Advanced Menu

2.Input Setup Input:DVD

1.Digital Setup 2.Multichannel Setup 3.Video Setup 4.Character Input 5.IntelliVolume 6.Listening Mode Preset 7.12V Trigger

ENTERQuit:SETUP

2-1. Digital Setup Sub-menu (When NET AUDIO is not selected as the input source)

This sub-menu concerns the input of digital signals from input sources and if these settings are incorrectly made, the digital audio signals may not be properly output, or not heard at all. This sub- menu will not appear if the selected input source button is AM or FM. It cannot be accessible if “Yes” is selected in 2-2. Multichannel Setup Sub-menu and “Multichannel” is selected in the Audio Selector. Also, since Video 5 is fixed to the optical digital terminal on the front panel, this sub-menu will not appear if Video 5 is selected.

Advanced Menu

2.Input Setup Input:DVD

2-1.Digital Setup

Input:DVD

a.Digital Input :COAX1

b.Digital Format :All

Quit:SETUP

Initial settings for each input source

Input source

Digital input

 

 

CD

OPT 1

 

 

PHONO

----

 

 

TUNER

 

 

 

TAPE

OPT 2

 

 

VIDEO 1

COAX 2

 

 

VIDEO 2

COAX 3

 

 

VIDEO 3

OPT 3

 

 

VIDEO 4

----

 

 

VIDEO 5

OPTICAL on front panel (fixed)

 

 

DVD

COAX 1

 

 

NET AUDIO

 

 

 

----: Available for digital input but not set in initial settings. : Not available for digital input.

a. Digital Input

This setting tells the DTR-7.3 which input source button on the front panel is connected with which digital input jack on the rear panel. To perform this setting, you must first select a digital input source at the front panel and then set the name of the digital input jack it is connected to with this setting.

For example, if the input source selected at the front panel is CD and the compact disc player is connected to DIGITAL INPUT OPT 1, then select “OPT1” here. If the input source selected is not connected to a digital input, then select “----.”

OPT1-3:Select if the input source is connected to any of the DIGITAL INPUT OPT jacks 1 through 3.

COAX1-3:Select if the input source is connected to any of the DIGITAL INPUT COAX jacks 1 through 3.

----:Select if the input source is not from a digital input jack.

46

Page 45 Page 47
Image 46
Page 45 Page 47
Contents DTR-7.3 Important Safeguards AvisPrecautions Contents Contents Features Supplied accessoriesInstalling the remote controller batteries Before using this unitUsing the remote controller Index parts and facilities Front panelIndex parts and facilities Front panel display Remote controller On/Standby button Send/Learn indicatorMode buttons and indicators 28 Sleep buttonRear panel Connecting to Audio/Video equipment Connecting a compact disc player CD Connecting to Audio/Video equipmentConnecting your audio components Connecting a turntable PhonoFlow of the video signals is as follows Connecting your video componentsConnecting a DVD Player Connecting a DVD player DVDConnecting a television monitor or projector Monitor OUT Connecting a video cassette recorder VideoSignal flow Connecting video camera, etc. Video 5 Input VideoMinimum speaker configuration for surround sound playback Connecting speakersIdeal speaker configuration Speaker placementConnecting speakers Connecting speakersUsing the speaker labels Connecting the included antennas Connecting antennasConnecting the AM antenna cable Assembling the AM loop antennaConnecting antennas When using the Zone 2 OUT terminals Connecting the remote zone Zone 2 speakersWhen using the Surr BACK/ZONE 2 Speakers terminals When using the Surr BACK/ZONE 2 PRE OUT terminalsIR OUT Miscellaneous Connections Connections for remote controlConnecting the power cords from other devices RS 232 portConnecting auxiliary power amplifier Connecting to an external device with 12V Trigger terminalConnecting to devices with analog multi channel output Miscellaneous ConnectionsTurning on the power Connecting the powerTurning on the power from the remote controller Basic operation Enjoying music or videos with the DTR-7.3To change the display of the input source from Tape to MD Using the sleep time remote controller only Adjusting the bass and trebleListening with headphones Enjoying music or videos with the DTR-7.3While playing back DTS sources Changing the listening modeSetup Enter Return While playing back Analog/PCM sourcesAdjusting the brightness of the front display Switching the displayTemporarily changing the speaker output levels Changing the audio mode Enjoying the multichannel outputListening to a stereo radio station FM mode Tuning into a radio stationListening to Radio Broadcasts Erasing a preset radio station Presetting a radio stationSelecting a preset radio station Listening to Radio BroadcastsAdjusting the volume for the remote zone Using the buttons on the DTR-7.3Enjoying music in the remote zone Rec Out Recording a sourceStart recording at the recording component as desired Recording a source Press the Rec Out buttonBasic Menu Setup MenuAdvanced Menu Navigating through the Setup Menu Setup MenuPress the Setup button Surr Back/Zone 2 Sub-menu Hardware SetupHardware Setup Menu Speaker Impedance Sub-menuHardware Setup IR in Setup Sub-menuSpeaker Setup Menu Speaker SetupSpeaker Config Sub-menu Speaker Setup Speaker Distance Sub-menuLevel Calibration Sub-menu Using the remote controller Press the Test buttonPress the Test button to complete the procedure Calibrating the speaker levelsInitial settings for each input source Input SetupInput Setup Menu Digital InputDigital Format Input SetupInput source selected Multichannel Video Video Setup Sub-menuLast Valid enables the source last selected Select to have Component VideoCharacter Input Sub-menu IntelliVolume Sub-menuIntelliVolume Character DisplayListening Mode Listening Mode Preset Sub-menuRelationship between input source and listening mode Type of softwareInput source signals Listening ModesTrigger Setup Sub-menu Setting Values Initial value Audio AdjustAudio Adjust Setup Menu Tone Control Sub-menuDelay Sub-menu Audio AdjustSound Effect Sub-menu LFE Level Sub-menu Theater Dimensional Sub-menuMono Sub-menu Surround Sub-menu THX Sub-menu Sound Effect Bass Setting Tone ControlListening mode Treble Re-EQPreference Volume Setup Sub-menuPreference Menu Preference Headphones Level Setup Sub-menuOSD Setup Sub-menu OSD Position Sub-menuOverview Using remote controllerRcvr Mode Controlling an Integra/Onkyo cassette tape deckUsing remote controller Controlling an Integra/Onkyo DVD playerPress the CD Mode button On Standby CD Mode DiscControlling an Integra/Onkyo CD player Controlling an Integra/Onkyo MD recorder On Standby SAT/MD ModePress the SAT/MD Mode button Rec RecordVOL Entering a pre-programming codeLearning a pre-programming code DisplayEntering a pre-programming code Setting NoPre-programming codes SAT Mode Satellite Tuner Mode Operating your programmed remote controllerDVD Mode DVD Player Mode Cable Mode Cable ModeVCR Mode VCR Mode Operating your programmed remote controllerTV Mode TV Mode Programming procedure Light Macro 1 MacroPress and release the same Mode button again Erasing the programmed command from one buttonErasing all the commands programmed under a Mode button Press and release the same button againProgramming the macro Using the macro functionWhat is the macro function? Executing the macroErasing all commands and macros that have been programmed Using the macro functionErasing a macro from the Macro 1 or 2 button Troubleshooting guide Troubleshooting guide Video and AudioIf one of the messages shown below appears Specifications Internet radio features Net-Tune FeaturesConnecting the DTR-7.3 to your Ethernet Network Modem To the WAN side To the LAN side portEnjoying Music on Internet Radio or NAS-2.3 Enjoying Internet radioEnjoying Music on Internet Radio or NAS-2.3 Playing a music file saved in NAS-2.3Use the / buttons to select one of the menu Using the Alphanumeric keysTo cancel the operation Caps Press the Enter buttonConfiguring Various Settings Network Setup MenuIP Address Sub-menu Configuring Various SettingsProxy Setup Sub-menu MAC Address Sub-menuSpecifications Troubleshooting guideAppendix

DTR-7.3 specifications

The Integra DTR-7.3 is a state-of-the-art AV receiver designed for audiophiles and home theater enthusiasts who seek a blend of performance, flexibility, and advanced technology. With a powerful amplifier section, the DTR-7.3 delivers an exceptional audio experience, providing crystal-clear sound reproduction across all frequencies.

At the heart of the DTR-7.3 is the ability to deliver 9.2 channels of amplification, making it an ideal choice for a comprehensive home theater setup. It supports various speaker configurations, allowing users to create immersive surround sound environments. The receiver is equipped with sophisticated DSP (Digital Signal Processing) that enhances audio fidelity while supporting multiple audio formats, including Dolby Atmos, DTS:X, and IMAX Enhanced. These technologies enable sound to move in a three-dimensional space, wrapping listeners in a dynamic auditory experience.

One of the standout features of the DTR-7.3 is its 4K Ultra HD video capabilities, ensuring that users can enjoy high-quality imagery with up to 60 frames per second. The receiver is equipped with HDR (High Dynamic Range) support, allowing for deeper contrast and more vibrant colors. Additionally, it includes multiple HDMI inputs and outputs, making it easy to connect to various devices, including gaming consoles, Blu-ray players, and streaming devices.

Connectivity is also a strong suit of the DTR-7.3. It supports Wi-Fi, Bluetooth, and Ethernet, granting users the ability to stream music from a variety of online services without the hassle of physical connections. The receiver is compatible with various music streaming protocols such as AirPlay, Spotify Connect, and TIDAL, allowing for seamless access to a vast library of audio content.

The DTR-7.3 also includes an advanced room calibration system that optimizes sound according to the specific acoustics of the room. This feature automates the tuning process, ensuring that every listening position benefits from balanced sound.

In addition, the user-friendly interface and the Integra Remote App make it easy to operate, allowing users to control their home theater setup from their smartphones or tablets. With its impressive combination of features, advanced technologies, and easy connectivity, the Integra DTR-7.3 stands out as a top-tier choice for anyone looking to elevate their home entertainment experience.
Top Page Image Contents