Eclipse Combustion VeriFlame Single Burner Monitoring System, 5600 instruction manual YES no

Page 35

Table 9.1 Veri-Flame Operating Sequence (continued)

BURNER START-UP

Is voltage present at air flow switch

within ten seconds?

NO PURGE MODELS

MODULATION MODELS

PURGE MODELS

NORMAL MESSAGE

Is voltage present at air switch . . .

NORMAL MESSAGE

AIR PROVEN

Purge based on selected time.

Is voltage present at air switch . . .

 

YES

 

NO

 

 

 

 

ERROR MESSAGE

AIR PROVEN

NORMAL MESSAGE

PURGE TO HIGH FIRE

YES NO

ERROR MESSAGE

AIR NOT PROVEN XX:XX:XX LOCKOUT

AIR NOT PROVEN XX:XX:XX LOCKOUT

Modulator sent to high fire for selected purge time.

NORMAL MESSAGE

PURGE TO LOW FIRE

Modulator sent to low fire for selected purge time.

Is voltage present

at high purge switch?

 

YES

 

NO

 

 

 

 

NORMAL MESSAGE

PILOT TRIAL FOR

IGNITION

Spark and pilot valve energized for selected trial for ignition.

ERROR MESSAGE

HI DAMPER FAIL XX:XX:XX LOCKOUT

Is low fire switch closed?

YES NO

ERROR MESSAGE

LOW FIRE FAIL XX:XX:XX LOCKOUT

NORMAL MESSAGE

PILOT FLAME ON

Flame signal detected

NORMAL MESSAGE

PILOT FLAME XX.XV

TIME = XXXX:XX:XX

Spark turns off at end of TFI; sequence delayed 5 seconds.

NORMAL MESSAGE

MAIN FLAME ON

Is pilot flame signal present?

YES NO

Is main flame signal present?

YES NO

Is flame signal present?

(see next page)

ERROR MESSAGE

PILOT FLAME FAIL XX:XX:XX LOCKOUT

ERROR MESSAGE

MAIN FLAME FAIL XX:XX:XX LOCKOUT

Eclipse Veri-Flame Instruction Manual 818 -2/02

35

Image 35
Contents VeriFlame Single Burner Monitoring System Copyright Disclaimer Notice Liability Warranty Audience Scope Document Conventions About this manualHOW to GET Help Table of Contents Page LED Status & Conditions for No Purge Models Table Product Description IntroductionIntroduction SpecificationsSpecifications Veri-Flame Bases/Purge & No Purge Models DimensionsVeri-Flame Unit/All Models Remote Display Model Number 5602-DBP Veri-Flame/Modulating Model with Base Model NumberRemote Display Model Number 5602-DB Modulation & Purge DIP Switch Settings DIP Switch SelectionDIP Switch Location Function Summary Interlocks and Limit Switch Input Terminal Combustion AirIntroduction Standard Features Main Fuel Valve Closed Switch TerminalTest Mode Run Mode Seconds Status Lights PUSH-BUTTON Optional FeaturesSystem Installation High Purge Input Remote Reset Remote Display & Power Supply Ignition Wiring Low Fire InputNo Purge and Purge Wiring Diagrams No Purge Models Typical Connections For All Models Modulating Base Purge and No Purge BasesInputs Sequence DiagramsSensor Wiring Flame Rods Sensor InstallationFlame Rod Position Scanners Scanner Sighting ConsiderationsFlame Signal Strength Minimum Pilot Test Test ProceduresSpark Sighting Test Limits & Interlock Tests Pilot Flame Failure Test Main Flame FailureTestIntroduction Maintenance Maintenance &TroubleshootingMonthly Checklist Yearly Checklist Problem Possible Cause Solution TroubleshootingLED Status AIR Failure LED Status & Conditions forVeri-Flame Purge ModelsAuto Interlocks Closed LED Status & Conditions forVeri-Flame Modulation ModelsRemote Display Messages Veri-Flame Operating Sequence Power onYES no YES Burner Shutdown AIR Failure Xxxxxx Lockout Pilot on Remote Display Diagnostic MessagesInternal Fault Metric to Metric AppendixConversion Factors Metric to EnglishPos Model Part Category Description Number Illustrated Parts List

5600, VeriFlame Single Burner Monitoring System specifications

The Eclipse Combustion VeriFlame Single Burner Monitoring System, model 5600, represents a significant advancement in the field of combustion management technology. Designed to provide enhanced monitoring and control of burner operations, the VeriFlame system is equipped with state-of-the-art features that ensure optimal efficiency, safety, and performance in a variety of industrial applications.

One of the main features of the VeriFlame 5600 is its advanced flame detection technology, which employs efficient optical sensors to monitor flame presence and stability continuously. This feature enables the system to provide real-time feedback, ensuring that burners operate within specified parameters and respond swiftly to any fluctuations. The system’s intelligent analytics can easily discern between normal operational conditions and potential hazards, enhancing safety and reducing the risk of unsafe operation.

The VeriFlame system is also known for its versatile communication capabilities, featuring multiple connectivity options. The unit can integrate seamlessly with existing plant control systems using industry-standard protocols such as Modbus or Profibus. This interoperability allows for comprehensive data sharing and centralized control of multiple burner systems from a single interface, streamlining operations and improving operator efficiency.

Another notable characteristic of the Eclipse Combustion VeriFlame is its user-friendly interface. The system comes with an intuitive graphical display that provides operators with critical operational data, including flame quality, burner status, and diagnostic information. This straightforward interface facilitates quick decision-making and troubleshooting, minimizing downtime and enhancing the overall operational efficiency of the burner system.

The 5600 model also offers robust diagnostic capabilities, allowing for proactive maintenance and reduced unexpected failures. It features built-in self-check routines and historical data logging, which provide valuable insights into system performance over time. These diagnostic tools empower operators to identify and address potential issues before they escalate, thereby reducing maintenance costs and enhancing the longevity of the burner components.

Moreover, the VeriFlame system is designed with flexibility in mind, accommodating various burner types and fuel sources. This adaptability makes it suitable for use in a wide range of industries, including oil and gas, power generation, and manufacturing.

In conclusion, the Eclipse Combustion VeriFlame Single Burner Monitoring System 5600 stands out due to its advanced flame detection, versatile communication options, user-friendly interface, robust diagnostics, and flexibility. Together, these features make it an essential tool for optimizing combustion processes, enhancing safety, and improving overall operational efficiency in industrial environments.