1.3ACCESS TO THE COMBUSTION CHAMBER
1.3.1 Removing the combustion cover
1.Remove the screws “E” (FIG. 1.9);
2.Lift off the combustion cover.
E 
E
E
FIG. 1.9
1.3.2 Removing the burner and jets
1.Remove the screws “F” from the burner (FIG. 1.10);
2.Remove the burner (FIG. 1.11);
3.Disconnect the electrodes (see section 1.3.3);
4.Remove the jets using a No. 7 socket spanner;
5.Replace in reverse order.
FIG. 1.10
F 
F
Fig. 1.11
1.3.3 Removing the electrodes
Before carrying out this procedure, unscrew and slide the burner forward (see previous section).
1.Remove rubber gasket “G” (FIG. 1.12);
2.To remove the detection electrode disconnect the cable at its connection point close to the P.C.B. (FIG. 1.13);
FIG. 1.12
G
FIG. 1.13
5