1.4.2 Removing the spark generator
1.Disconnect ignition leads “S” by pulling upward (FIG. 1.26);
2.Remove the screw “T” (FIG. 1.27);
3.Remove the spark generator by pulling forward from the gas valve.
S
FIG. 1.26
T
FIG. 1.27
1.4.3 Removing the gas valve
Important! Before removing the gas valve, ensure the gas supply is turned off.
1.Disconnect all the cables from the solenoid and modureg;
2.Remove the spark generator (see previous section);
3.Release the top nut “U” (FIG. 1.28);
4.Remove the screws “V” from the bottom of the gas valve pipe (FIG. 1.29);
5.Remove the gas valve).
U
FIG. 1.28
VV
FIG. 1.29
10