Technical Speciﬁcations, Electrical Shock Hazard

Figure 1 - Getting to know the AquaSmart 7600 Series Control

The AquaSmart control should only be operated with the door attached and securely closed.

Communication Port
TW/TR Terminals
Sensor Mount
	Touch Pad
	Sensor Jack
Clamping Screw For Sensor
Power Disconnect Switch (Optional)
Rotate door until grooves	Pull door up
are aligned
Door Removal

Do Not Use This Control in an Application that is Not

Within the Ratings Listed in This Section. Improper Control Operation May Result.

Temperature Ranges and Differentials

○High Limit Setting Range: 100 to 240°F (37 to 115°C)

○High Limit Differential Range: 5 to 45°F (2 to 25°C)

○Low Limit Setting Range: 100 to 220°F (37 to 104°C)

○Low Limit Differential Range: 10 to 45°F (5 to 25°C)

○Factory Range Stops available - consult factory

Input Voltage: 120 Vac - 50/60 Hz.

Input Current: 0.1 A + B1 + C1 + ZC

MAX Input Current: 20A (Reduce to 15A if optional power disconnect switch is used)

24 Vac Thermostat Anticipator Current: 0.1 Amp.

Burner Current Rating (B1):

7600A (oil): 7.4 A at 120 Vac FLA; 44.4 A inrush LRA.

7600B (gas): 1.25 A at 24 Vac; 30 VA (total load). Circulator Current Rating (C1): 7.4 A at 120 Vac FLA; 44.4 A inrush LRA.

Zone Control Current Rating (ZC): 7.4 A at 120 Vac FLA; 44.4 A inrush LRA.

○Storage Temperature: -40 to +150°F (-40 to +65°C)

○Operating Temperature: -4 to +150°F (-20 to +65°C)

7600B at 50 Hz: -4 to +140°F (-20 to +60°C)

○Maximum Sensing Element Temperature: 250°F (121°C)

○Relative Humidity: 5 to 85% RH, non-condensing and non-crystallizing

Underwriters Laboratories Listed to UL353,

UL1998 for U.S. and Canada;

CSA C22.2 No. 24

AquaSmart Boiler Control Manual