Greenheck Fan 470654 manual Motor Overamps

Page 23

Troubleshooting

Motor Overamps

Air volume too high?

No

Actual static pressure

lower than design?

No

Blower rotation correct?

Yes

Motor voltage correct?

Yes

Motor horsepower too low?

No

Shorted windings in motor?

Yes

Everything is working

properly, consult factory.

Yes

Yes

No

No

Yes

Yes

Adjust drives or increase external static pressure as needed.

Reference: Start-Up - Blower, Air Volume Measurement and Check, pg. 14

Adjust drives to reduce blower RPM.

Reference: Start-Up - Blower, Air Volume Measurement and Check, pg. 14

Reverse blower rotation.

Reference: Start-Up - Blower, Check the Blower Rotation

Provide proper power supply.

Reference: Start-Up - Blower, Check the Voltage, pg. 14

Resize motor.

Replace motor.

Model VSU Make-Up Air 23

®

Image 23
Contents Model VSU General Safety Information Installation, Operation and Maintenance ManualHandling Inspection and Maintenance during StorageReceiving UnpackingTable of Contents Subassemblies Product OverviewOpen View Burner, Blower and Control Center SectionDampers Burner SubassemblyControl Center Installation Service Platform Material List Complete InstallationInstallation of Optional Service Platform Figure C AssemblyInstallation of Electrical Wiring Determine the Supply Gas Requirements Installation of Direct Gas PipingInstall Additional Regulator if Required Installation of Building Pressure Control optional Check blower rotation Check for vibration Supply fan RPM Start-Up ChecklistUnit Model Number Start-Up Blower Check the Supply Gas Pressure Check the Optional High and Low Gas Pressure SwitchesStart-Up Direct Gas Set-Up Optional ComponentsMeasuring the Pressure Drop Maximum firing rate adjustmentSet the Burner Air Pressure Differential Set the Maximum Firing RateSet the Minimum Firing Rate Regulators and Modulating ValvesMaxitrol Series 44 9 Terminals The Maxitrol Set the Unit’s Operating TemperatureFlame Signal Check Pilot Ignition Modulating Variable Volume OperationOperation VAV Units optional SpeedElectrical Sequence Exhaust Fan Contact S1 Closed optional Operation Recirculating Units optionalOperation Electrical Recirculation OperationHeat Contact Closed Flame Safeguard FSG Sequence3a. Heat Contact S4 Closed Pilot Ignition 3b. Heat Contact S4 Closed Direct SparkBlower Does Not Operate TroubleshootingMotor Overamps Too Much Airflow Insufficient AirflowExcessive Noise or Vibration Does not attempt to light No visible spark Heater Does Not Operate Pilot IgnitionAttempts to light, but no pilot visible spark Between 0.625 and 0.675 in. WC? Visible pilotHeater Does Not Operate Direct Spark Attempts to light, but no flame Visible spark Wheels Maintenance RoutineBelt Drives MotorsMaintenance Fall Reference Typical Gas Train Layout with Direct Spark Ignition Control Center Layout Dirty Filter SwitchFan Relay allows power to pass to energize motor starter Heat Relay allows power to pass to heating controlsDateTime AM/PM Maintenance LogWarranty

470654 specifications

Greenheck Fan 470654 is a cutting-edge ventilation solution designed to meet the demanding requirements of commercial and industrial applications. Renowned for its reliability and efficiency, this fan model integrates advanced technologies and engineering to provide optimal air movement and control.

One of the standout features of the Greenheck Fan 470654 is its robust construction. Designed with high-quality materials, the fan promotes longevity and durability, making it suitable for use in tough environments. This fan features a heavy-gauge steel housing that minimizes vibration and enhances noise reduction, contributing to a quieter operation, a critical factor in maintaining a serene working environment.

The fan is equipped with a powerful motor that ensures efficient airflow, achieving high performance while consuming minimal energy. This energy efficiency is emphasized through the use of advanced motor technology, including variable frequency drive (VFD) compatibility. VFDs allow for precise control of the fan speed, enabling adjustments based on system demand, thus significantly reducing energy consumption and operating costs.

In terms of airflow performance, the Greenheck Fan 470654 is engineered to provide a high volume of air movement while maintaining static pressure. Its aerodynamic design minimizes resistance, enhancing overall efficiency. The fan is designed to operate across a range of static pressures, making it versatile for different applications, from commercial kitchens to large manufacturing facilities.

Additionally, the fan's installation is straightforward, thanks to its user-centric design. The model incorporates mounting brackets and options for various duct configurations, ensuring seamless integration into existing systems. Maintenance is also made easier with accessible components, allowing technicians to perform regular checks and upkeep without extensive downtime.

Safety features are a priority in the design of the Greenheck Fan 470654. It includes protective features such as thermal overload protection to prevent motor damage and extend operational life. The fan's design also adheres to industry standards and regulations, providing peace of mind for users.

In summary, the Greenheck Fan 470654 is a well-engineered solution that combines durability, efficiency, and advanced technology to deliver superior performance in ventilation applications. With its powerful motor, energy-saving capabilities, and ease of installation and maintenance, it stands out as a reliable choice for professionals seeking optimal airflow management.