DMP Electronics XR2500F manual Proprietary Dialer, Dact Central Station

Page 38

Installation

28.5 Proprietary Dialer

The Model XR2500F provides proprietary service when configured as a digital dialer.

28.6 DACT Central Station

DACT Central Station service can be provided under by adding an Ademco AB12M bell and bell housing.

28.7 Bell Cutoff

The Bell Cutoff time cannot be less than 15 minutes.

28.8 Standard or Encrypted Line Security

Standard Line Security is provided when configured as a Path 1 NET system using an XR500N panel. The NET Check-in time must be set to 06 minutes or RDM. When programmed for Standard Line Security, Exit Time Restart is disabled. When a dialer is required for 06 minute check-in time, an attack resistant enclosure (DMP Model 350A) is required. When the check-in time is set to a number less than 200 seconds, an attack resistant enclosure is not required.

To provide Encrypted Line security, install an XR500E panel.

For Encrypted Line security operation, communication between the Premise and Supervising Station provides 128 bit encryption when using an XR500E panel or an XR500 panel with an iCOM-E Encrypted Network Alarm Router.

The Model XR500 Series Protected Premises Control Unit is suitable for Standard Line Security service when configured for NET communication with SCS-1R receiving system. This configuration is approved for the following:

AMCX - Central Station Alarm Units APOU - Proprietary Alarm Units

28.9 Wireless Audible Annunciation Option

The Wireless Audible option must be selected as ANY for commercial applications.

28.10 Model 463G CELL Only, Standard or Encrypted Line Security

Standard or Encrypted Line Security is provided when programmed using CELL with no backup. XR500 cellular communication is used as primary with a 3 minute check-in when armed or disarmed.

Path 1 programming

 

Comm Type: = CELL

Checkin: = 3 minute

 

 

Path Type: = Primary

Fail Time: = 3 minute

Encrypt: = NO or YES*

Test Rpt: = NO

 

 

Sub Code: = NO or YES

 

*For Encrypted Line Security, program a Passphrase in Network Options.

Digital Monitoring Products

XR2500F Installation Guide

30

Image 38
Contents Installation Guide Model XR2500F Command Processor Installation Guide Introduction Secondary Power SupplyFire Command Center MountingPowered Zones for 2-Wire Smoke Detectors Accessory DevicesBattery Information J22 LX-Bus Expansion ConnectorListed Compliance Specifications J1 Ethernet ConnectorReset and Tamper Headers Universal UL Burglary SpecificationsPolice Station Connected and Local Burglar Alarm Units Holdup Alarm UnitsDigital Burglar Alarm Communicator System Units ANSI/ UL Access Control System UnitsWiring Diagrams California State Fire Marshal SpecificationsNew York City MEA Specifications Household Fire Warning System Units ANSI/UL 985, NfpaThis page intentionally left blank Introduction Relays LX-BusOutputs Zone ReferenceMounting Wiring Diagram Use Marking16 VAC Transformer Transformers and AC Power ConnectionAC Connection Earth Ground GNDDescription Secondary Power SupplyBattery Connection to XR2500F Command Processor panel Bell Silence/Bell Trouble Two 866 NAC ModulesConnection XR2500F On-board LX-Bus Installing the 481 CardLX-Bus Operation LX-Bus 481 Zone Expansion Interface Card893A Dual Phone Line Module Notification FCC RegistrationFire Command Center Remote Fire Command CenterOutput Expansion ExpansionZone Expansion Accessory Devices Lightning ProtectionAccessory Devices Connecting LX-Bus and Keypad Bus Devices Mounting Keypads and Zone Expansion ModulesBattery Information 11.7 XR2500F Standby Battery Calculations Copy Sub-Totals to nextThis page only Standby Battery Selection Bell Output Keypad BusTerminals 11 Powered Zones for 2-Wire Smoke DetectorsSmoke and Glassbreak Detector Output Current RatingCompatible 2-Wire Smoke Detector Chart DS250HDTerminals Keyswitch Arming ZoneProtection Zones Operational ParametersContact Rating Output Harness WiringDry Contact Relay Outputs J23 6-Pin Header Model 300 Harness WiringJ11 Annunciator Outputs Model 860 Relay ModuleSerial Connector LEDs J22 LX-Bus Expansion ConnectorJ21 Serial Connector LX-Bus Interface Cards23.1 J16 Reset Header J1 Ethernet ConnectorReset and Tamper Headers Ethernet LEDsListed Compliance Specifications Universal UL Burglary SpecificationsHousehold Burglar-Alarm System Units ANSI/UL Area InformationStandard or Encrypted Line Security Proprietary DialerDact Central Station Model 463G Cell Only, Standard or Encrypted Line SecurityPath 1 programming Path 2 programming Path 3 programming Police Station Connected and Local Burglar Alarm Units Holdup Alarm UnitsDigital Burglar Alarm Communicator System Units ANSI/ UL Bell Automatic Bell TestPath 1 programming Path 2 programming Path 3 programming Panel Designation Access Control System UnitsMercantile Compatible DevicesUniversal Fire Alarm Specifications Local Protective Signaling Systems Power SupplyPower Fail Delay Remote Station Protective Signaling SystemsNotification Appliances Ground FaultHousehold Fire Warning System Units ANSI/UL 985, Nfpa Cross ZoningDigital Dialer and Network Communication California State Fire Marshal SpecificationsNew York City MEA Specifications Communication ProgrammingWiring Diagrams Prewired 866 Modules with NAC ExtenderWiring Diagrams Alarm Bell PWR Bell Out + Bell Trouble DSM-12/24 Module 39.5 867 Class B Style W Notification Appliance Circuit To initiating zoneTo initiating zone DMP Model Dual Style D Zone Module Installation Command Processor Panel Remote Station Reversing Relay ConnectionSecond LX-Bus with Auxiliary Power Supply XR2500F 481 Command Processor PanelLX-Bus Module Connection Powered Burglary Devices Model 860 Relay Module ConnectionRevisions to This Document Ver Section Number and Heading Quick Explanation of ChangesThis page intentionally left blank Operating Instructions Model XR2500F Panels Mounting Instructions Listings and Approvals

XR2500F specifications

The DMP Electronics XR2500F is an advanced and versatile electronic device designed to cater to a wide range of applications including industrial automation, robotics, and smart home technologies. Known for its robust performance and reliable functionalities, the XR2500F stands out as a leading option in the market.

One of the main features of the XR2500F is its powerful processing unit, which ensures efficient handling of complex tasks and data processing. With a clock speed of up to 2.5 GHz, the device is capable of multitasking, enabling users to run multiple applications simultaneously without compromising performance. This makes the XR2500F an ideal choice for applications that require real-time data processing and analysis.

The XR2500F is equipped with an extensive array of connectivity options, including Wi-Fi, Bluetooth, and Ethernet capabilities. This allows for seamless integration with various devices and networks. The wireless options facilitate easy communication with cloud services and other IoT devices, making it suitable for smart home automation systems, where synchronization and control are critical.

In terms of memory, the XR2500F offers significant storage capacity, with options that can accommodate up to 64GB of RAM and 512GB of flash storage. This ample memory ensures that users can store large amounts of data and run memory-intensive applications without experiencing slowdowns. Additionally, the device supports expandable memory options, allowing for future upgrades to meet growing demands.

The XR2500F also incorporates advanced security technologies to protect sensitive data. Features like end-to-end encryption and secure boot processes safeguard against unauthorized access and data breaches. This is particularly important in industrial settings where data integrity is critical for operational safety.

Another remarkable characteristic of the XR2500F is its energy efficiency. Designed with the latest power management technologies, the device minimizes energy consumption while maximizing performance. This not only reduces operational costs but also aligns with green technology initiatives.

Overall, the DMP Electronics XR2500F is a high-performance electronic device that combines powerful processing, extensive connectivity, robust memory, enhanced security, and energy efficiency. Its versatility and reliability make it a preferred choice for professionals seeking innovative solutions in automation and control systems.