DMP Electronics manual Operating Instructions Model XR2500F Panels

Page 60

OPERATING INSTRUCTIONS

MODEL XR2500F PANELS

NORMAL STANDBY CONDITION

When the system is in the normal standby condition, the keypad shows either the time of day or a blank display.

ALARM CONDITION

When the system is in an alarm condition, the keypad display shows the violated zone name(s) followed by an alarm display.

ALARM SILENCE

To silence the alarm while the bell or siren is sounding, enter your code number and press the COMMAND key. This silences the alarm but does not cancel any alarm reports to the central station.

RESETTING DETECTORS

To reset a smoke or other detector, enter the User Menu by pressing the COMMAND key until MENU? NO YES appears in the display. Press the top row key under YES. The display shows ENTER CODE: -. Enter your code number and press COMMAND. The keypad display now shows ALARM SILENCE? if your code allows. Press the COMMAND key until SENSOR RESET? appears in the display. Press any top row key.

TROUBLE CONDITION

When a device is in a trouble condition, the keypad tones and displays the zone or device name followed by TRBL. Press any top row key to silence.

SYSTEM TESTING

You should test the security system weekly to ensure proper operation. You can do this through a function in the User Menu. After entering the User Menu, press the COMMAND key until SYSTEM TEST? displays. Press the left most top row Select key. The system bell, battery, and communication to the central station receiver system is then tested.

ALARM SERVICE

If service is required for this system, please contact:

Company______________________________________________

Address_______________________________________________

Telephone_____________________________________________

 

Mounting Instructions

Listings and Approvals

 

Attach the above operating instructions

California State Fire Marshal (CSFM)

 

to the front, or framed and located

FCC Part 15

 

 

adjacent to, the panel or a keypad with

FCC Part 68 Registration ID CCKAL00BXR500

 

New York City (MEA)

 

an alphanumeric display.

 

Underwriters Laboratories (UL) Listed

 

 

 

 

 

 

Commercial and Residential Fire, Burglar, Holdup, and

 

 

 

Access Protected Premise Unit

 

 

 

ANSI/UL 294

Access Control System Units

 

 

 

ANSI/UL 365

Police Connected Burglar

 

 

 

ANSI/UL 609

Local Burglar

 

 

 

ANSI/UL 636

Holdup Alarm Units Systems Accessory

 

 

 

ANSI/UL 1023

Household Burglar

 

 

 

ANSI/UL 1076

Proprietary Burglar

 

 

 

ANSI/UL 1610

Central Station Burglar

 

 

 

ANSI/UL 1635

Digital Burglar

 

 

 

ANSI/UL 985

Household Fire Warning

 

 

 

ANSI/UL 864

Fire Protective Signaling 9th Edition

 

 

 

UL Standard Line Security

 

 

 

UL Encrypted Line Security

 

 

800-641-4282

INTRUSION • FIRE • ACCESS • NETWORKS

 

 

 

 

 

 

 

www.dmp.com

2500 North Partnership Boulevard

 

 

 

 

 

 

Made in the USA

Springfield, Missouri 65803-8877

 

 

 

 

 

Products, Inc.

9043

LT-0759 1.03 © 2009 Digital Monitoring

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 59 Page 60
Image 60
Page 59 Page 60
Contents Installation Guide Model XR2500F Command Processor Installation Guide Secondary Power Supply Fire Command CenterIntroduction MountingAccessory Devices Battery InformationPowered Zones for 2-Wire Smoke Detectors J22 LX-Bus Expansion ConnectorJ1 Ethernet Connector Reset and Tamper HeadersListed Compliance Specifications Universal UL Burglary SpecificationsHoldup Alarm Units Digital Burglar Alarm Communicator System Units ANSI/ ULPolice Station Connected and Local Burglar Alarm Units Access Control System UnitsCalifornia State Fire Marshal Specifications New York City MEA SpecificationsWiring Diagrams Household Fire Warning System Units ANSI/UL 985, NfpaThis page intentionally left blank Introduction LX-Bus OutputsRelays Zone ReferenceMounting Wiring Diagram Use MarkingTransformers and AC Power Connection AC Connection16 VAC Transformer Earth Ground GNDSecondary Power Supply Battery Connection to XR2500F Command Processor panelDescription Two 866 NAC Modules ConnectionBell Silence/Bell Trouble Installing the 481 Card LX-Bus OperationXR2500F On-board LX-Bus LX-Bus 481 Zone Expansion Interface Card893A Dual Phone Line Module Notification FCC RegistrationFire Command Center Remote Fire Command CenterExpansion Zone ExpansionOutput Expansion Accessory Devices Lightning ProtectionAccessory Devices Connecting LX-Bus and Keypad Bus Devices Mounting Keypads and Zone Expansion ModulesBattery Information 11.7 XR2500F Standby Battery Calculations Copy Sub-Totals to nextThis page only Standby Battery Selection Bell Output Keypad BusPowered Zones for 2-Wire Smoke Detectors Smoke and Glassbreak Detector OutputTerminals 11 Current RatingCompatible 2-Wire Smoke Detector Chart DS250HDKeyswitch Arming Zone Protection ZonesTerminals Operational ParametersOutput Harness Wiring Dry Contact Relay OutputsContact Rating Model 300 Harness Wiring J11 Annunciator OutputsJ23 6-Pin Header Model 860 Relay ModuleJ22 LX-Bus Expansion Connector J21 Serial ConnectorSerial Connector LEDs LX-Bus Interface CardsJ1 Ethernet Connector Reset and Tamper Headers23.1 J16 Reset Header Ethernet LEDsListed Compliance Specifications Universal UL Burglary SpecificationsHousehold Burglar-Alarm System Units ANSI/UL Area InformationProprietary Dialer Dact Central StationStandard or Encrypted Line Security Model 463G Cell Only, Standard or Encrypted Line SecurityPath 1 programming Path 2 programming Path 3 programming Holdup Alarm Units Digital Burglar Alarm Communicator System Units ANSI/ ULPolice Station Connected and Local Burglar Alarm Units Bell Automatic Bell TestPath 1 programming Path 2 programming Path 3 programming Access Control System Units MercantilePanel Designation Compatible DevicesUniversal Fire Alarm Specifications Power Supply Power Fail DelayLocal Protective Signaling Systems Remote Station Protective Signaling SystemsGround Fault Household Fire Warning System Units ANSI/UL 985, NfpaNotification Appliances Cross ZoningCalifornia State Fire Marshal Specifications New York City MEA SpecificationsDigital Dialer and Network Communication Communication ProgrammingWiring Diagrams Prewired 866 Modules with NAC ExtenderWiring Diagrams Alarm Bell PWR Bell Out + Bell Trouble DSM-12/24 Module 39.5 867 Class B Style W Notification Appliance Circuit To initiating zoneTo initiating zone DMP Model Dual Style D Zone Module Installation Command Processor Panel Remote Station Reversing Relay ConnectionSecond LX-Bus with Auxiliary Power Supply XR2500F 481 Command Processor PanelLX-Bus Module Connection Powered Burglary Devices Model 860 Relay Module ConnectionRevisions to This Document Ver Section Number and Heading Quick Explanation of ChangesThis page intentionally left blank Operating Instructions Model XR2500F Panels Mounting Instructions Listings and Approvals

XR2500F specifications

The DMP Electronics XR2500F is an advanced and versatile electronic device designed to cater to a wide range of applications including industrial automation, robotics, and smart home technologies. Known for its robust performance and reliable functionalities, the XR2500F stands out as a leading option in the market.

One of the main features of the XR2500F is its powerful processing unit, which ensures efficient handling of complex tasks and data processing. With a clock speed of up to 2.5 GHz, the device is capable of multitasking, enabling users to run multiple applications simultaneously without compromising performance. This makes the XR2500F an ideal choice for applications that require real-time data processing and analysis.

The XR2500F is equipped with an extensive array of connectivity options, including Wi-Fi, Bluetooth, and Ethernet capabilities. This allows for seamless integration with various devices and networks. The wireless options facilitate easy communication with cloud services and other IoT devices, making it suitable for smart home automation systems, where synchronization and control are critical.

In terms of memory, the XR2500F offers significant storage capacity, with options that can accommodate up to 64GB of RAM and 512GB of flash storage. This ample memory ensures that users can store large amounts of data and run memory-intensive applications without experiencing slowdowns. Additionally, the device supports expandable memory options, allowing for future upgrades to meet growing demands.

The XR2500F also incorporates advanced security technologies to protect sensitive data. Features like end-to-end encryption and secure boot processes safeguard against unauthorized access and data breaches. This is particularly important in industrial settings where data integrity is critical for operational safety.

Another remarkable characteristic of the XR2500F is its energy efficiency. Designed with the latest power management technologies, the device minimizes energy consumption while maximizing performance. This not only reduces operational costs but also aligns with green technology initiatives.

Overall, the DMP Electronics XR2500F is a high-performance electronic device that combines powerful processing, extensive connectivity, robust memory, enhanced security, and energy efficiency. Its versatility and reliability make it a preferred choice for professionals seeking innovative solutions in automation and control systems.
Top Page Image Contents