Bosch Appliances F220-B6 Electrical Supervision, Base Specifications, Detector Specifications

F220 Series Detectors with F220-B6/C/E/R BasesGeneral Information en 9

2.3.2	Base Specifications
	Alarm Current (only base current, detector current excluded)
	F220-B6:	Two-wire base; no base current
	F220-B6C:	31 mA at 12 VDC
		35 mA at 24 VDC
		40 mA maximum at 30 VDC
	F220-B6E:	25 mA at 12 VDC
		30 mA at 24 VDC
		34 mA maximum at 30 VDC
	F220-B6R:	13.5 mA at 12 VDC
		16.5 mA at 24 VDC
		19 mA maximum at 30 VDC
	Standby Current
	F220-B6/C/R:	No current draw in standby
	F220-B6E:	16 mA maximum at 30 VDC
	Voltage
	F220-B6 (two-wire):	8.5 VDC to 32.0 VDC
	F220-B6C/E/R (four-wire):	10.0 VDC to 30.0 VDC
	Table 2.4 F220-B6 Series Base Specifications

2.3.3Detector Specifications

Current

Alarm:	20 mA minimum at 8.5 VDC
	35 mA maximum at 32 VDC
Standby:	0.12 mA maximum
Startup:	0.12 mA maximum
Powerup Time	22 second maximum
Rate of Rise
F220-135:	15°F/min (9°C/min) or greater
Voltage
Operating:	8.5 VDC to 32.0 VDC
RMS Ripple:	25% of DC input

Table 2.5 F220 Series Detector Heads Specifications

2.4Electrical Supervision

When the F220-B6 Series Bases are wired according to the instructions in this document, the control panel initiates a trouble signal when a detector is removed from its base,

Bosch Security Systems, Inc. Installation Manual 4998138694 -04 2007.01