Bosch Appliances F220-B6 F220 Series Detectors, About F220 Series Detector Heads

Page 6

6 en General Information

F220 Series Detectors with F220-B6/C/E/R Bases

 

 

2.2F220 Series Detectors

2.2.1About F220 Series Detector Heads

The F220 Series Detector Heads listed inTable 2.1 each require an F220-B6 Series Base.

WARNING! The F220-PTHC detects carbon monoxide

! (CO) as a component of a fire. Do not use the F220-PTHC as a stand-alone CO detector.

F220-135

Electronic heat detector 135°F (57°C), fixed

temperature and rate-of-rise

 

 

 

F220-135F

Electronic heat detector 135°F (57°C), fixed

 

temperature only

 

 

F220-190F

Electronic heat detector 190°F (88°C), fixed

temperature only

 

 

F220-P

Photoelectric smoke detector

 

 

F220-PTH

Photoelectric smoke detector with integral 135°F

(57°C) heat sensor

 

 

 

 

Photoelectric smoke detector with integral 135°F

F220-PTHC

(57°C) heat sensor and CO enhanced smoke

 

detection

 

 

Table 2.1 F220 Series Detector Heads

4998138694 -04 2007.01

Installation Manual

Bosch Security Systems, Inc.

Image 6
Contents F220 Series Detectors with F220-B6/C/E/R Bases Required Maintenance and Testing LegalTrademarks General Information F220-B6 Series Detector BasesCompatible Control Panels Base Comparisons Base Features F220 Series Detectors About F220 Series Detector Heads2 F220 Series Detector Features 3 F220 Series Heat Detector HeadsTechnical Specifications General Specifications4 F220 Series Smoke Detector Heads Base Specifications Detector SpecificationsElectrical Supervision Install the Bases Mount the BasesTerminal Connections Wire the BasesLoop Wiring Specifications EOL ResistorsWire Optional Remote Annunciators Four-wire Loop TerminationWire F220-B6 Two-wire Bases Wire F220-B6C/E/R Four-wire Bases1 F220-B6C 2 F220-B6EF220-B6E 3 F220-B6R F220-B6RWire Power Supervision Modules Wire F220-B6E Power Supervision BaseWire D275 Power Supervision Module Install the Detector Heads Mount the Detector HeadsOptional Locking Bar Mounting Skirt LEDDetector Head Keyed. Do not force them onto the mounting basesTest Mode Sensitivity ModeSet Detector Modes Set CleanMe Feature Flash Rate and Trouble IndicationTest the Installation Inspect the InstallationActivate an Alarm at Each Detector Reset the Control PanelTest Each Detector Test the Alarm Loop Perform Nfpa 72 Required TestingTest CO Sensors Page Page USA