Hearth and Home Technologies II-B owner manual Risk of Fire

WARNING

Risk of Fire

• Non-combustible clearances must be maintained.

•Sheetrock, wood or other combustibles must NOT be used as sheathing or facing in the non- combustible zone.

•See Sections 3 & 8 for proper clearances.

•See Section 1 for combustible/non- combustible definitions.

May install non-combustible materials to cover gap be- tween facing material and appliance (see Figure 8.5).

WARNING

Fire Risk.

Finish all edges and fronts to clearances and specifications listed in manual.

•Black metal columns may be covered with non-combustible material only.

•Do NOT overlap combustible materials onto appliance front.

•Install combustible materials only up to specified clearances on top, front and side edges.

•Seal joints between the finished wall and appliance top and sides using only a 300º F minimum sealant.

WARNING

Fire Risk.

Water Intrusion Risk.

Hood is required.

•Flashing and non-combustible sheathing must be installed before facing materials.

•Facing must be non-combustible and seal tight to fireplace front.

		COMBUSTIBLE							HOUSEWRAP
		SHEATHING
									NON-COMBUSTIBLE
									SHEATHING
									(SUPPLIED)
									BRICK LEDGE
				12 in.
									NON-COMBUSTIBLE
									FACING
	REQUIRED
	FLASHING
	(SUPPLIED)
									THERE MUST BE NO GAP
				6 in.					BETWEEN BRICK LEDGE,
									FACING MATERIAL AND
				MAX.
									APPLIANCE FRONT.
									6 in. MAXMUM PROJECTION
									FROM FACE OF FIREPLACE
				HOOD
	HOUSE	NON-COMBUSTIBLE
	WRAP
		SHEATING
		12 in.
Figure 8.5	Exterior View
22		Heat & Glo LifeStyle Collection	•	Twilight-II-B	•	2108-900	Rev. G	•	8/07