Hearth and Home Technologies II-B Installing Non-combustible Facing Material Outdoor Side

C.Installing Non-combustible Facing Material (Outdoor Side)

WARNING

Fire Risk.

•Follow these instructions exactly.

•Facing materials must be installed properly to prevent fire.

•No materials may be substituted

without authorization by Hearth & Home Technologies.

•Center and attach two top boards (the two shorter pieces) to the framing members. See Figure 5.19.

•Use fasteners from fastener packet (in manual bag) in shaded areas (see Figure 5.19).

•Use regular sheetrock screws in non-shaded areas.

Apply fasteners from

fastener packet in

these areas.

Figure 5.19 Attaching Non-combustible Facing Material

(Outdoor Side Only)

•Attach the left and right side pieces to the framing mem- bers. (See Figure 5.20).

NON-COMBUSTIBLE

FACING MATERIAL

49-5/8 in.

66-1/8 in.

Figure 5.20 Complete Installation of Non-combustible

Facing Material (Outdoor Side)

•Use a wet or dry towel or soft brush to remove dust or dirt from facing material.

•Apply a non-combustible adhesive to attach tile, stone or other non-combustible finishing materials per manu- facturer’s instructions.

14 Heat & Glo LifeStyle Collection • Twilight-II-B • 2108-900 Rev. G • 8/07