Hearth and Home Technologies II-B owner manual Glass Assembly, Grilles and Trim, Shutter Settings

3	4	1
2	5	6

STEP 7. LOG #6 (SRV2077-701): Set log #6 onto the grate bar as shown. Lay the “Y” end of log #6 onto log #1 resting it into the small depression of log #1.

3	4	1
2	5	6
	7

STEP 8. LOG #7 (SRV703-703): Place log #7 on the grate tine between log #2 and log #5. Rest one end on the burner making sure not to cover any port holes.

F. Glass Assembly

WARNING

Handle glass doors with care.

•Inspect the gasket to ensure it is undamaged.

•Inspect the glass for cracks, chips or scratches.

•Do NOT strike, slam or scratch glass.

•Do NOT clean glass with a razor blade.

•Do NOT operate appliance with glass door removed, cracked, broken or scratched.

•Replace glass door assembly as a complete appliance.

Removing Glass Assembly

Remove wing nuts and glass clips around glass door. Remove glass door from the appliance.

Replacing Glass Assembly

Replace the glass door on the appliance.

G. Grilles and Trim

Install optional marble and brass trim surround kits as de- sired. Marble, brass, brick, tile, or other non-combustible materials can be used to cover up the gap between the sheet rock and the appliance.

Do not obstruct or modify the air inlet/outlet grilles. When overlapping on both sides, leave enough space so that the bottom grille can be lowered and the trim door re- moved.

H. Shutter Settings

	NG	LP
Twilight-II-B	3/8 in.	Full Open

Heat & Glo LifeStyle Collection • Twilight-II-B • 2108-900 Rev. G • 8/07 27